From: Fabio Coatti <cova@ferrara.linux.it>
To: Remi <remi.colinet@free.fr>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16
Date: Mon, 13 Nov 2006 16:54:26 +0100 [thread overview]
Message-ID: <200611131654.27187.cova@ferrara.linux.it> (raw)
In-Reply-To: <1163431218.45588d325eddf@imp4-g19.free.fr>
Alle 16:20, lunedì 13 novembre 2006, Remi ha scritto:
> Selon Fabio Coatti <cova@ferrara.linux.it>:
> > > ata_piix: probe of 0000:00:1f.2 failed with error -16
> > > Kernel panic - not syncing: Attempted to kill init!
> > >
> > > I disabled most options in my .config file just keeping ata_piix
> > > enabled. 2.6.19-rc5 still boots fine but 2.6.19-rc-mm1 gives the same
> > > previous message.
> >
> > It seems exactly the same problem that is hitting me:
> >
> > http://lkml.org/lkml/2006/11/13/37
> >
> > If some patch comes out, I'll be willing to try it asap ;)
>
> You are getting the same message
>
> ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
> PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2
> ata_piix: probe of 0000:00:1f.2 failed with error -16
>
> But, your drives are driven by the sata_sil driver, which seems to be ok.
> See your partition tables displayed below.
Not exactly: my fault to not including previous mails, but basically I've two
different devices: one driven by sata_sil, the other by piix.
cfr: http://lkml.org/lkml/2006/11/12/20
In this dmesg, the kernel finds only the second device, and assigns the
name "sda"; of course the right drive (the real "sda" on my system) is not
detected so the kernel is searching the "/" filesystem where it cannot be
found.
here the relevant part of lspci output:
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev
02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Unknown device 1014
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f000 [size=16]
03:03.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid]
Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
I/O ports at 8000 [size=8]
I/O ports at 8400 [size=4]
I/O ports at 8800 [size=8]
I/O ports at 8c00 [size=4]
I/O ports at 9000 [size=16]
Memory at fb005000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 50000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
--
Fabio "Cova" Coatti http://members.ferrara.linux.it/cova
Ferrara Linux Users Group http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
next prev parent reply other threads:[~2006-11-13 15:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-13 13:44 2.6.19-rc5-mm1 : probe of 0000:00:1f.2 failed with error -16 Remi
2006-11-13 13:52 ` Fabio Coatti
2006-11-13 15:20 ` Remi
2006-11-13 15:54 ` Fabio Coatti [this message]
2006-11-13 16:27 ` Remi
2006-11-13 19:45 ` Fabio Coatti
2006-11-13 14:14 ` Alan
2006-11-13 14:59 ` Remi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200611131654.27187.cova@ferrara.linux.it \
--to=cova@ferrara.linux.it \
--cc=linux-kernel@vger.kernel.org \
--cc=remi.colinet@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox