[PATCH 19/26] Dynamic kernel command-line - sh

[PATCH 19/26] Dynamic kernel command-line - sh

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.18-rc5-mm1.org/arch/sh/kernel/setup.c 
linux-2.6.18-rc5-mm1/arch/sh/kernel/setup.c
--- linux-2.6.18-rc5-mm1.org/arch/sh/kernel/setup.c	
2006-09-03 18:56:51.000000000 +0300
+++ linux-2.6.18-rc5-mm1/arch/sh/kernel/setup.c	2006-09-03 
21:02:18.000000000 +0300
@@ -88,7 +88,7 @@ static struct sh_machine_vector* __init 
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000
 
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
+static char __initdata command_line[COMMAND_LINE_SIZE] = { 
0, };
 
 struct resource standard_io_resources[] = {
 	{ "dma1", 0x00, 0x1f },
@@ -125,8 +125,8 @@ static inline void parse_cmdline (char *
 	int len = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(saved_command_line, COMMAND_LINE, 
COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, COMMAND_LINE, 
COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 
 	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
 	memory_end = memory_start + __MEMORY_SIZE;

-- 
VGER BF report: U 0.499656

[PATCH 19/26] Dynamic kernel command-line - sh

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.18-rc5-mm1.org/arch/sh/kernel/setup.c linux-2.6.18-rc5-mm1/arch/sh/kernel/setup.c
--- linux-2.6.18-rc5-mm1.org/arch/sh/kernel/setup.c	2006-09-03 18:56:51.000000000 +0300
+++ linux-2.6.18-rc5-mm1/arch/sh/kernel/setup.c	2006-09-03 21:02:18.000000000 +0300
@@ -88,7 +88,7 @@ static struct sh_machine_vector* __init 
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000
 
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
+static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
 
 struct resource standard_io_resources[] = {
 	{ "dma1", 0x00, 0x1f },
@@ -125,8 +125,8 @@ static inline void parse_cmdline (char *
 	int len = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 
 	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
 	memory_end = memory_start + __MEMORY_SIZE;

-- 
VGER BF report: H 0

Re: [PATCH 19/26] Dynamic kernel command-line - sh

[Paul Mundt]

On Wed, Oct 11, 2006 at 09:16:55PM +0200, Alon Bar-Lev wrote:
> 
> 1. Rename saved_command_line into boot_command_line.
> 2. Set command_line as __initdata.
> 
> Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
> 
The sh bits look fine, though I'm fairly impartial to this change. It
doesn't seem like this is going to be needed in very many places..

In the future, you may also wish to CC linux-arch if you want the
attention of architecture maintainers.

Acked-by: Paul Mundt <lethal@linux-sh.org>

On Wed, Oct 11, 2006 at 09:17:10PM +0200, Alon Bar-Lev wrote:
> 
> 1. Rename saved_command_line into boot_command_line.
> 2. Set command_line as __initdata.
> 
> Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
> 
Likewise for sh64.

Acked-by: Paul Mundt <lethal@linux-sh.org>

Re: [PATCH 19/26] Dynamic kernel command-line - sh

[Alon Bar-Lev]

On 10/12/06, Paul Mundt <lethal@linux-sh.org> wrote:
> The sh bits look fine, though I'm fairly impartial to this change. It
> doesn't seem like this is going to be needed in very many places..

Thank you for your quick response!
But I failed to push i386 command-line size to more than 256 bytes...
You are right, it is required only for memory extreme devices...

Options:
1. Add COMMAND_LINE_SIZE to kernel config - was rejected because
kernel has already too much parameters, this was the initial patch
more than a year ago.
2. Just increase COMMAND_LINE_SIZE of i386, x86_64 - was rejected
because of it affecting low memory devices.
3. Convert the command-line into dynamically allocated buffers - this try.

> In the future, you may also wish to CC linux-arch if you want the
> attention of architecture maintainers.

Thank you, I was not aware of this.
I hope there will be no take 3 :)

Best Regards,
Alon Bar-Lev.

[PATCH 00/26] Dynamic kernel command-line

[Alon Bar-Lev]

Hello,

This is take 3 of submission, I submit this patch
once in a few monthes to collect some more signatures :)
Until now, I got three:
- avr32
- sh
- sh64

I know this is not one of major priorities, but it
should be simple enough to be reviewed and included.

I will also be happy to get a REJECT response, so I
stop trying to get it included. Any suggestions of
how to push this farward will also be appreciated.

Current implementation stores a static command-line
buffer allocated to COMMAND_LINE_SIZE size. Most
architectures stores two copies of this buffer, one
for future reference and one for parameter parsing.

Current kernel command-line size for most architecture
is much too small for module parameters, video settings,
initramfs paramters and much more. The problem is that
setting COMMAND_LINE_SIZE to a grater value, allocates
static buffers.

In order to allow a greater command-line size, these
buffers should be dynamically allocated or marked
as init disposable buffers, so unused memory can be
released.

This patch renames the static saved_command_line
variable into boot_command_line adding __initdata
attribute, so that it can be disposed after
initialization. This rename is required so applications
that use saved_command_line will not be affected
by this change.

It reintroduces saved_command_line as dynamically
allocated buffer to match the data in boot_command_line.

It also mark secondary command-line buffer as __initdata,
and copies it to dynamically allocated static_command_line
buffer components may hold reference to it after
initialization.

This patch is for linux-2.6.19 and is divided to
target each architecture. I could not check this in any
architecture so please forgive me if I got it wrong.

The per-architecture modification is very simple, use
boot_command_line in place of saved_command_line. The
common code is the change into dynamic command-line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

[PATCH 01/26] Dynamic kernel command-line - common

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line, mark
   as init disposable.
2. Add dynamic allocated saved_command_line.
3. Add dynamic allocated static_command_line.
4. During startup copy:
   boot_command_line into saved_command_line.
   arch command_line into static_command_line.
5. Parse static_command_line and not
   arch command_line, so arch command_line may
   be freed.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/include/linux/init.h linux-2.6.19/include/linux/init.h
--- linux-2.6.19.org/include/linux/init.h	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/include/linux/init.h	2006-12-02 11:31:32.000000000 +0200
@@ -67,7 +67,8 @@ extern initcall_t __con_initcall_start[]
 extern initcall_t __security_initcall_start[], __security_initcall_end[];
 
 /* Defined in init/main.c */
-extern char saved_command_line[];
+extern char __initdata boot_command_line[];
+extern char *saved_command_line;
 extern unsigned int reset_devices;
 
 /* used by init/main.c */
@@ -163,7 +164,7 @@ struct obs_kernel_param {
 #define early_param(str, fn)					\
 	__setup_param(str, fn, fn, 1)
 
-/* Relies on saved_command_line being set */
+/* Relies on boot_command_line being set */
 void __init parse_early_param(void);
 #endif /* __ASSEMBLY__ */
 
diff -urNp linux-2.6.19.org/init/main.c linux-2.6.19/init/main.c
--- linux-2.6.19.org/init/main.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/init/main.c	2006-12-02 11:33:35.000000000 +0200
@@ -116,8 +116,12 @@ extern void time_init(void);
 void (*late_time_init)(void);
 extern void softirq_init(void);
 
-/* Untouched command line (eg. for /proc) saved by arch-specific code. */
-char saved_command_line[COMMAND_LINE_SIZE];
+/* Untouched command line saved by arch-specific code. */
+char __initdata boot_command_line[COMMAND_LINE_SIZE];
+/* Untouched saved command line (eg. for /proc) */
+char *saved_command_line;
+/* Command line for parameter parsing */
+static char *static_command_line;
 
 static char *execute_command;
 static char *ramdisk_execute_command;
@@ -400,6 +404,20 @@ static void __init smp_init(void)
 #endif
 
 /*
+ * We need to store the untouched command line for future reference.
+ * We also need to store the touched command line since the parameter
+ * parsing is performed in place, and we should allow a component to
+ * store reference of name/value for future reference.
+ */
+static void __init setup_command_line(char *command_line)
+{
+	saved_command_line = alloc_bootmem(strlen (boot_command_line)+1);
+	static_command_line = alloc_bootmem(strlen (command_line)+1);
+	strcpy (saved_command_line, boot_command_line);
+	strcpy (static_command_line, command_line);
+}
+
+/*
  * We need to finalize in a non-__init function or else race conditions
  * between the root thread and the init thread may cause start_kernel to
  * be reaped by free_initmem before the root thread has proceeded to
@@ -453,7 +471,7 @@ void __init parse_early_param(void)
 		return;
 
 	/* All fall through to do_early_param. */
-	strlcpy(tmp_cmdline, saved_command_line, COMMAND_LINE_SIZE);
+	strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 	parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
 	done = 1;
 }
@@ -503,6 +521,7 @@ asmlinkage void __init start_kernel(void
 	printk(KERN_NOTICE);
 	printk(linux_banner);
 	setup_arch(&command_line);
+	setup_command_line(command_line);
 	unwind_setup();
 	setup_per_cpu_areas();
 	smp_prepare_boot_cpu();	/* arch-specific boot-cpu hooks */
@@ -520,9 +539,9 @@ asmlinkage void __init start_kernel(void
 	preempt_disable();
 	build_all_zonelists();
 	page_alloc_init();
-	printk(KERN_NOTICE "Kernel command line: %s\n", saved_command_line);
+	printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
 	parse_early_param();
-	parse_args("Booting kernel", command_line, __start___param,
+	parse_args("Booting kernel", static_command_line, __start___param,
 		   __stop___param - __start___param,
 		   &unknown_bootoption);
 	sort_main_extable();

[PATCH 02/26] Dynamic kernel command-line - alpha

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/alpha/kernel/setup.c linux-2.6.19/arch/alpha/kernel/setup.c
--- linux-2.6.19.org/arch/alpha/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/alpha/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -122,7 +122,7 @@ static void get_sysnames(unsigned long, 
 			 char **, char **);
 static void determine_cpu_caches (unsigned int);
 
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 /*
  * The format of "screen_info" is strange, and due to early
@@ -547,7 +547,7 @@ setup_arch(char **cmdline_p)
 	} else {
 		strlcpy(command_line, COMMAND_LINE, sizeof command_line);
 	}
-	strcpy(saved_command_line, command_line);
+	strcpy(boot_command_line, command_line);
 	*cmdline_p = command_line;
 
 	/* 
@@ -589,7 +589,7 @@ setup_arch(char **cmdline_p)
 	}
 
 	/* Replace the command line, now that we've killed it with strsep.  */
-	strcpy(command_line, saved_command_line);
+	strcpy(command_line, boot_command_line);
 
 	/* If we want SRM console printk echoing early, do it now. */
 	if (alpha_using_srm && srmcons_output) {

[PATCH 03/26] Dynamic kernel command-line - arm

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/arm/kernel/setup.c linux-2.6.19/arch/arm/kernel/setup.c
--- linux-2.6.19.org/arch/arm/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/arm/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -106,7 +106,7 @@ unsigned long phys_initrd_size __initdat
 static struct meminfo meminfo __initdata = { 0, };
 static const char *cpu_name;
 static const char *machine_name;
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
@@ -806,8 +806,8 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data   = (unsigned long) &_edata;
 	init_mm.brk	   = (unsigned long) &_end;
 
-	memcpy(saved_command_line, from, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 	parse_cmdline(cmdline_p, from);
 	paging_init(&meminfo, mdesc);
 	request_standard_resources(&meminfo, mdesc);

[PATCH 04/26] Dynamic kernel command-line - arm26

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/arm26/kernel/setup.c linux-2.6.19/arch/arm26/kernel/setup.c
--- linux-2.6.19.org/arch/arm26/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/arm26/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -80,7 +80,7 @@ unsigned long phys_initrd_size __initdat
 static struct meminfo meminfo __initdata = { 0, };
 static struct proc_info_item proc_info;
 static const char *machine_name;
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 
@@ -492,8 +492,8 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data   = (unsigned long) &_edata;
 	init_mm.brk	   = (unsigned long) &_end;
 
-	memcpy(saved_command_line, from, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 	parse_cmdline(&meminfo, cmdline_p, from);
 	bootmem_init(&meminfo);
 	paging_init(&meminfo);

[PATCH 05/26] Dynamic kernel command-line - avr32

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

---

diff -urNp linux-2.6.19.org/arch/avr32/kernel/setup.c linux-2.6.19/arch/avr32/kernel/setup.c
--- linux-2.6.19.org/arch/avr32/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/avr32/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -44,7 +44,7 @@ struct avr32_cpuinfo boot_cpu_data = {
 };
 EXPORT_SYMBOL(boot_cpu_data);
 
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 /*
  * Should be more than enough, but if you have a _really_ complex
@@ -202,7 +202,7 @@ __tagtable(ATAG_MEM, parse_tag_mem);
 
 static int __init parse_tag_cmdline(struct tag *tag)
 {
-	strlcpy(saved_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
 	return 0;
 }
 __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
@@ -318,7 +318,7 @@ void __init setup_arch (char **cmdline_p
 	init_mm.end_data = (unsigned long) &_edata;
 	init_mm.brk = (unsigned long) &_end;
 
-	strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 	parse_early_param();
 

[PATCH 06/26] Dynamic kernel command-line - cris

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set cris_command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/cris/kernel/setup.c linux-2.6.19/arch/cris/kernel/setup.c
--- linux-2.6.19.org/arch/cris/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/cris/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -29,7 +29,7 @@ struct screen_info screen_info;
 extern int root_mountflags;
 extern char _etext, _edata, _end;
 
-char cris_command_line[COMMAND_LINE_SIZE] = { 0, };
+char __initdata cris_command_line[COMMAND_LINE_SIZE] = { 0, };
 
 extern const unsigned long text_start, edata; /* set by the linker script */
 extern unsigned long dram_start, dram_end;
@@ -153,8 +153,8 @@ setup_arch(char **cmdline_p)
 #endif
 
 	/* Save command line for future references. */
-	memcpy(saved_command_line, cris_command_line, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+	memcpy(boot_command_line, cris_command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
 
 	/* give credit for the CRIS port */
 	show_etrax_copyright();

[PATCH 07/26] Dynamic kernel command-line - frv

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/frv/kernel/setup.c linux-2.6.19/arch/frv/kernel/setup.c
--- linux-2.6.19.org/arch/frv/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/frv/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -110,7 +110,7 @@ unsigned long __initdata num_mappedpages
 
 struct cpuinfo_frv __nongprelbss boot_cpu_data;
 
-char command_line[COMMAND_LINE_SIZE];
+char __initdata command_line[COMMAND_LINE_SIZE];
 char __initdata redboot_command_line[COMMAND_LINE_SIZE];
 
 #ifdef CONFIG_PM
@@ -762,7 +762,7 @@ void __init setup_arch(char **cmdline_p)
 	printk("uClinux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
 #endif
 
-	memcpy(saved_command_line, redboot_command_line, COMMAND_LINE_SIZE);
+	memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE);
 
 	determine_cpu();
 	determine_clocks(1);
@@ -803,7 +803,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	/* deal with the command line - RedBoot may have passed one to the kernel */
-	memcpy(command_line, saved_command_line, sizeof(command_line));
+	memcpy(command_line, boot_command_line, sizeof(command_line));
 	*cmdline_p = &command_line[0];
 	parse_cmdline_early(command_line);
 

[PATCH 08/26] Dynamic kernel command-line - h8300

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/h8300/kernel/setup.c linux-2.6.19/arch/h8300/kernel/setup.c
--- linux-2.6.19.org/arch/h8300/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/h8300/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -54,7 +54,7 @@ unsigned long rom_length;
 unsigned long memory_start;
 unsigned long memory_end;
 
-char command_line[COMMAND_LINE_SIZE];
+char __initdata command_line[COMMAND_LINE_SIZE];
 
 extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
 extern int _ramstart, _ramend;
@@ -154,8 +154,8 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
-	memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = 0;
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
 
 #ifdef DEBUG
 	if (strlen(*cmdline_p)) 

[PATCH 09/26] Dynamic kernel command-line - i386

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/i386/kernel/head.S linux-2.6.19/arch/i386/kernel/head.S
--- linux-2.6.19.org/arch/i386/kernel/head.S	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/i386/kernel/head.S	2006-12-02 11:31:32.000000000 +0200
@@ -97,7 +97,7 @@ ENTRY(startup_32)
 	movzwl OLD_CL_OFFSET,%esi
 	addl $(OLD_CL_BASE_ADDR),%esi
 2:
-	movl $(saved_command_line - __PAGE_OFFSET),%edi
+	movl $(boot_command_line - __PAGE_OFFSET),%edi
 	movl $(COMMAND_LINE_SIZE/4),%ecx
 	rep
 	movsl
diff -urNp linux-2.6.19.org/arch/i386/kernel/setup.c linux-2.6.19/arch/i386/kernel/setup.c
--- linux-2.6.19.org/arch/i386/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/i386/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -145,7 +145,7 @@ unsigned long saved_videomode;
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000	
 
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 unsigned char __initdata boot_params[PARAM_SIZE];
 
@@ -1405,7 +1405,7 @@ void __init setup_arch(char **cmdline_p)
 		print_memory_map("user");
 	}
 
-	strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
 	max_low_pfn = setup_memory();

[PATCH 10/26] Dynamic kernel command-line - ia64

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/ia64/kernel/efi.c linux-2.6.19/arch/ia64/kernel/efi.c
--- linux-2.6.19.org/arch/ia64/kernel/efi.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ia64/kernel/efi.c	2006-12-02 11:31:32.000000000 +0200
@@ -412,11 +412,11 @@ efi_init (void)
 	efi_char16_t *c16;
 	u64 efi_desc_size;
 	char *cp, vendor[100] = "unknown";
-	extern char saved_command_line[];
+	extern char __initdata boot_command_line[];
 	int i;
 
 	/* it's too early to be able to use the standard kernel command line support... */
-	for (cp = saved_command_line; *cp; ) {
+	for (cp = boot_command_line; *cp; ) {
 		if (memcmp(cp, "mem=", 4) == 0) {
 			mem_limit = memparse(cp + 4, &cp);
 		} else if (memcmp(cp, "max_addr=", 9) == 0) {
diff -urNp linux-2.6.19.org/arch/ia64/kernel/sal.c linux-2.6.19/arch/ia64/kernel/sal.c
--- linux-2.6.19.org/arch/ia64/kernel/sal.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ia64/kernel/sal.c	2006-12-02 11:31:32.000000000 +0200
@@ -194,9 +194,9 @@ static void __init
 chk_nointroute_opt(void)
 {
 	char *cp;
-	extern char saved_command_line[];
+	extern char __initdata boot_command_line[];
 
-	for (cp = saved_command_line; *cp; ) {
+	for (cp = boot_command_line; *cp; ) {
 		if (memcmp(cp, "nointroute", 10) == 0) {
 			no_int_routing = 1;
 			printk ("no_int_routing on\n");
diff -urNp linux-2.6.19.org/arch/ia64/kernel/setup.c linux-2.6.19/arch/ia64/kernel/setup.c
--- linux-2.6.19.org/arch/ia64/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ia64/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -404,7 +404,7 @@ setup_arch (char **cmdline_p)
 	ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
 
 	*cmdline_p = __va(ia64_boot_param->command_line);
-	strlcpy(saved_command_line, *cmdline_p, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
 
 	efi_init();
 	io_port_init();

[PATCH 11/26] Dynamic kernel command-line - m32r

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/m32r/kernel/setup.c linux-2.6.19/arch/m32r/kernel/setup.c
--- linux-2.6.19.org/arch/m32r/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/m32r/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -64,7 +64,7 @@ struct screen_info screen_info = {
 
 extern int root_mountflags;
 
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 static struct resource data_resource = {
 	.name   = "Kernel data",
@@ -95,8 +95,8 @@ static __inline__ void parse_mem_cmdline
 	int usermem = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 
 	memory_start = (unsigned long)CONFIG_MEMORY_START+PAGE_OFFSET;
 	memory_end = memory_start+(unsigned long)CONFIG_MEMORY_SIZE;

[PATCH 12/26] Dynamic kernel command-line - m68k

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/m68k/kernel/setup.c linux-2.6.19/arch/m68k/kernel/setup.c
--- linux-2.6.19.org/arch/m68k/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/m68k/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -256,7 +256,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.brk = (unsigned long) &_end;
 
 	*cmdline_p = m68k_command_line;
-	memcpy(saved_command_line, *cmdline_p, CL_SIZE);
+	memcpy(boot_command_line, *cmdline_p, CL_SIZE);
 
 	/* Parse the command line for arch-specific options.
 	 * For the m68k, this is currently only "debug=xxx" to enable printing

[PATCH 13/26] Dynamic kernel command-line - m68knommu

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/m68knommu/kernel/setup.c linux-2.6.19/arch/m68knommu/kernel/setup.c
--- linux-2.6.19.org/arch/m68knommu/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/m68knommu/kernel/setup.c	2006-12-02 11:31:32.000000000 +0200
@@ -47,7 +47,7 @@ unsigned long memory_end;
 EXPORT_SYMBOL(memory_start);
 EXPORT_SYMBOL(memory_end);
 
-char command_line[COMMAND_LINE_SIZE];
+char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* setup some dummy routines */
 static void dummy_waitbut(void)
@@ -234,8 +234,8 @@ void setup_arch(char **cmdline_p)
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
-	memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = 0;
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
 
 #ifdef DEBUG
 	if (strlen(*cmdline_p))

[PATCH 14/26] Dynamic kernel command-line - mips

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/mips/kernel/setup.c linux-2.6.19/arch/mips/kernel/setup.c
--- linux-2.6.19.org/arch/mips/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/mips/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -409,7 +409,7 @@ static void __init arch_mem_init(char **
 	print_memory_map();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
-	strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 
 	*cmdline_p = command_line;
 

[PATCH 15/26] Dynamic kernel command-line - parisc

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/parisc/kernel/setup.c linux-2.6.19/arch/parisc/kernel/setup.c
--- linux-2.6.19.org/arch/parisc/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/parisc/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-char	command_line[COMMAND_LINE_SIZE] __read_mostly;
+char	__initdata command_line[COMMAND_LINE_SIZE] __read_mostly;
 
 /* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */
 struct proc_dir_entry * proc_runway_root __read_mostly = NULL;
@@ -71,9 +71,9 @@ void __init setup_cmdline(char **cmdline
 	/* boot_args[0] is free-mem start, boot_args[1] is ptr to command line */
 	if (boot_args[0] < 64) {
 		/* called from hpux boot loader */
-		saved_command_line[0] = '\0';
+		boot_command_line[0] = '\0';
 	} else {
-		strcpy(saved_command_line, (char *)__va(boot_args[1]));
+		strcpy(boot_command_line, (char *)__va(boot_args[1]));
 
 #ifdef CONFIG_BLK_DEV_INITRD
 		if (boot_args[2] != 0) /* did palo pass us a ramdisk? */
@@ -84,7 +84,7 @@ void __init setup_cmdline(char **cmdline
 #endif
 	}
 
-	strcpy(command_line, saved_command_line);
+	strcpy(command_line, boot_command_line);
 	*cmdline_p = command_line;
 }
 
diff -urNp linux-2.6.19.org/arch/parisc/mm/init.c linux-2.6.19/arch/parisc/mm/init.c
--- linux-2.6.19.org/arch/parisc/mm/init.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/parisc/mm/init.c	2006-12-02 11:31:33.000000000 +0200
@@ -77,12 +77,12 @@ static void __init mem_limit_func(void)
 {
 	char *cp, *end;
 	unsigned long limit;
-	extern char saved_command_line[];
+	extern char __initdata boot_command_line[];
 
 	/* We need this before __setup() functions are called */
 
 	limit = MAX_MEM;
-	for (cp = saved_command_line; *cp; ) {
+	for (cp = boot_command_line; *cp; ) {
 		if (memcmp(cp, "mem=", 4) == 0) {
 			cp += 4;
 			limit = memparse(cp, &end);

[PATCH 16/26] Dynamic kernel command-line - powerpc

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/powerpc/kernel/legacy_serial.c linux-2.6.19/arch/powerpc/kernel/legacy_serial.c
--- linux-2.6.19.org/arch/powerpc/kernel/legacy_serial.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/powerpc/kernel/legacy_serial.c	2006-12-02 11:31:33.000000000 +0200
@@ -498,7 +498,7 @@ static int __init check_legacy_serial_co
 	DBG(" -> check_legacy_serial_console()\n");
 
 	/* The user has requested a console so this is already set up. */
-	if (strstr(saved_command_line, "console=")) {
+	if (strstr(boot_command_line, "console=")) {
 		DBG(" console was specified !\n");
 		return -EBUSY;
 	}
diff -urNp linux-2.6.19.org/arch/powerpc/kernel/prom.c linux-2.6.19/arch/powerpc/kernel/prom.c
--- linux-2.6.19.org/arch/powerpc/kernel/prom.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/powerpc/kernel/prom.c	2006-12-02 11:31:33.000000000 +0200
@@ -894,7 +894,7 @@ void __init early_init_devtree(void *par
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
-	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
 	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
diff -urNp linux-2.6.19.org/arch/powerpc/kernel/udbg.c linux-2.6.19/arch/powerpc/kernel/udbg.c
--- linux-2.6.19.org/arch/powerpc/kernel/udbg.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/powerpc/kernel/udbg.c	2006-12-02 11:31:33.000000000 +0200
@@ -146,7 +146,7 @@ void __init disable_early_printk(void)
 {
 	if (!early_console_initialized)
 		return;
-	if (strstr(saved_command_line, "udbg-immortal")) {
+	if (strstr(boot_command_line, "udbg-immortal")) {
 		printk(KERN_INFO "early console immortal !\n");
 		return;
 	}
diff -urNp linux-2.6.19.org/arch/powerpc/platforms/powermac/setup.c linux-2.6.19/arch/powerpc/platforms/powermac/setup.c
--- linux-2.6.19.org/arch/powerpc/platforms/powermac/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/powerpc/platforms/powermac/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -505,8 +505,8 @@ void note_bootable_part(dev_t dev, int p
 	if ((goodness <= current_root_goodness) &&
 	    ROOT_DEV != DEFAULT_ROOT_DEVICE)
 		return;
-	p = strstr(saved_command_line, "root=");
-	if (p != NULL && (p == saved_command_line || p[-1] == ' '))
+	p = strstr(boot_command_line, "root=");
+	if (p != NULL && (p == boot_command_line || p[-1] == ' '))
 		return;
 
 	if (!found_boot) {

[PATCH 17/26] Dynamic kernel command-line - ppc

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/ppc/kernel/setup.c linux-2.6.19/arch/ppc/kernel/setup.c
--- linux-2.6.19.org/arch/ppc/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ppc/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -543,7 +543,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.brk = (unsigned long) klimit;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
 
 	parse_early_param();
diff -urNp linux-2.6.19.org/arch/ppc/platforms/lopec.c linux-2.6.19/arch/ppc/platforms/lopec.c
--- linux-2.6.19.org/arch/ppc/platforms/lopec.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ppc/platforms/lopec.c	2006-12-02 11:31:33.000000000 +0200
@@ -344,7 +344,7 @@ lopec_setup_arch(void)
 		 if (bootargs != NULL) {
 			 strcpy(cmd_line, bootargs);
 			 /* again.. */
-			 strcpy(saved_command_line, cmd_line);
+			 strcpy(boot_command_line, cmd_line);
 		}
 	}
 #endif
diff -urNp linux-2.6.19.org/arch/ppc/platforms/pplus.c linux-2.6.19/arch/ppc/platforms/pplus.c
--- linux-2.6.19.org/arch/ppc/platforms/pplus.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ppc/platforms/pplus.c	2006-12-02 11:31:33.000000000 +0200
@@ -592,7 +592,7 @@ static void __init pplus_setup_arch(void
 		if (bootargs != NULL) {
 			strcpy(cmd_line, bootargs);
 			/* again.. */
-			strcpy(saved_command_line, cmd_line);
+			strcpy(boot_command_line, cmd_line);
 		}
 	}
 #endif
diff -urNp linux-2.6.19.org/arch/ppc/platforms/prep_setup.c linux-2.6.19/arch/ppc/platforms/prep_setup.c
--- linux-2.6.19.org/arch/ppc/platforms/prep_setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/ppc/platforms/prep_setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -634,7 +634,7 @@ static void __init prep_init_sound(void)
 	/*
 	 * Find a way to push these informations to the cs4232 driver
 	 * Give it out with printk, when not in cmd_line?
-	 * Append it to  cmd_line and saved_command_line?
+	 * Append it to  cmd_line and boot_command_line?
 	 * Format is cs4232=io,irq,dma,dma2
 	 */
 }
@@ -897,7 +897,7 @@ prep_setup_arch(void)
 		 if (bootargs != NULL) {
 			 strcpy(cmd_line, bootargs);
 			 /* again.. */
-			 strcpy(saved_command_line, cmd_line);
+			 strcpy(boot_command_line, cmd_line);
 		}
 	}

[PATCH 18/26] Dynamic kernel command-line - s390

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/s390/kernel/setup.c linux-2.6.19/arch/s390/kernel/setup.c
--- linux-2.6.19.org/arch/s390/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/s390/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -633,7 +633,7 @@ setup_arch(char **cmdline_p)
 #endif /* CONFIG_64BIT */
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
 
 	*cmdline_p = COMMAND_LINE;
 	*(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';

[PATCH 19/26] Dynamic kernel command-line - sh

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>

---

diff -urNp linux-2.6.19.org/arch/sh/kernel/setup.c linux-2.6.19/arch/sh/kernel/setup.c
--- linux-2.6.19.org/arch/sh/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/sh/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -75,7 +75,7 @@ static struct sh_machine_vector* __init 
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000
 
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
+static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
 
 static struct resource code_resource = { .name = "Kernel code", };
 static struct resource data_resource = { .name = "Kernel data", };
@@ -91,8 +91,8 @@ static inline void parse_cmdline (char *
 	int len = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 
 	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
 	memory_end = memory_start + __MEMORY_SIZE;

[PATCH 20/26] Dynamic kernel command-line - sh64

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>

---

diff -urNp linux-2.6.19.org/arch/sh64/kernel/setup.c linux-2.6.19/arch/sh64/kernel/setup.c
--- linux-2.6.19.org/arch/sh64/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/sh64/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -83,7 +83,7 @@ extern int sh64_tlb_init(void);
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000
 
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
+static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
 unsigned long long memory_start = CONFIG_MEMORY_START;
 unsigned long long memory_end = CONFIG_MEMORY_START + (CONFIG_MEMORY_SIZE_IN_MB * 1024 * 1024);
 
@@ -95,8 +95,8 @@ static inline void parse_mem_cmdline (ch
 	int len = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 
 	for (;;) {
 	  /*

[PATCH 21/26] Dynamic kernel command-line - sparc

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/sparc/kernel/setup.c linux-2.6.19/arch/sparc/kernel/setup.c
--- linux-2.6.19.org/arch/sparc/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/sparc/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -246,7 +246,7 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
-	strcpy(saved_command_line, *cmdline_p);
+	strcpy(boot_command_line, *cmdline_p);
 
 	/* Set sparc_cpu_model */
 	sparc_cpu_model = sun_unknown;
diff -urNp linux-2.6.19.org/arch/sparc/kernel/sparc_ksyms.c linux-2.6.19/arch/sparc/kernel/sparc_ksyms.c
--- linux-2.6.19.org/arch/sparc/kernel/sparc_ksyms.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/sparc/kernel/sparc_ksyms.c	2006-12-02 11:31:33.000000000 +0200
@@ -237,7 +237,7 @@ EXPORT_SYMBOL(prom_getproplen);
 EXPORT_SYMBOL(prom_getproperty);
 EXPORT_SYMBOL(prom_node_has_property);
 EXPORT_SYMBOL(prom_setprop);
-EXPORT_SYMBOL(saved_command_line);
+EXPORT_SYMBOL(boot_command_line);
 EXPORT_SYMBOL(prom_apply_obio_ranges);
 EXPORT_SYMBOL(prom_feval);
 EXPORT_SYMBOL(prom_getbool);

[PATCH 22/26] Dynamic kernel command-line - sparc64

[Alon Bar-Lev]

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/sparc64/kernel/setup.c linux-2.6.19/arch/sparc64/kernel/setup.c
--- linux-2.6.19.org/arch/sparc64/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/sparc64/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -315,7 +315,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
-	strcpy(saved_command_line, *cmdline_p);
+	strcpy(boot_command_line, *cmdline_p);
 
 	if (tlb_type == hypervisor)
 		printk("ARCH: SUN4V\n");
diff -urNp linux-2.6.19.org/arch/sparc64/kernel/sparc64_ksyms.c linux-2.6.19/arch/sparc64/kernel/sparc64_ksyms.c
--- linux-2.6.19.org/arch/sparc64/kernel/sparc64_ksyms.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/sparc64/kernel/sparc64_ksyms.c	2006-12-02 11:31:33.000000000 +0200
@@ -253,7 +253,7 @@ EXPORT_SYMBOL(prom_getproplen);
 EXPORT_SYMBOL(prom_getproperty);
 EXPORT_SYMBOL(prom_node_has_property);
 EXPORT_SYMBOL(prom_setprop);
-EXPORT_SYMBOL(saved_command_line);
+EXPORT_SYMBOL(boot_command_line);
 EXPORT_SYMBOL(prom_finddevice);
 EXPORT_SYMBOL(prom_feval);
 EXPORT_SYMBOL(prom_getbool);

[PATCH 23/26] Dynamic kernel command-line - um

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/um/include/user_util.h linux-2.6.19/arch/um/include/user_util.h
--- linux-2.6.19.org/arch/um/include/user_util.h	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/um/include/user_util.h	2006-12-02 11:31:33.000000000 +0200
@@ -38,7 +38,7 @@ extern unsigned long long highmem;
 
 extern char host_info[];
 
-extern char saved_command_line[];
+extern char __initdata boot_command_line[];
 
 extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
 extern unsigned long _unprotected_end;
diff -urNp linux-2.6.19.org/arch/um/kernel/um_arch.c linux-2.6.19/arch/um/kernel/um_arch.c
--- linux-2.6.19.org/arch/um/kernel/um_arch.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/um/kernel/um_arch.c	2006-12-02 11:31:33.000000000 +0200
@@ -482,7 +482,7 @@ void __init setup_arch(char **cmdline_p)
 	atomic_notifier_chain_register(&panic_notifier_list,
 			&panic_exit_notifier);
 	paging_init();
-        strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
  	*cmdline_p = command_line;
 	setup_hostinfo();
 }

[PATCH 24/26] Dynamic kernel command-line - v850

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/v850/kernel/setup.c linux-2.6.19/arch/v850/kernel/setup.c
--- linux-2.6.19.org/arch/v850/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/v850/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -42,7 +42,7 @@ extern char _root_fs_image_start __attri
 extern char _root_fs_image_end __attribute__ ((__weak__));
 
 
-char command_line[COMMAND_LINE_SIZE];
+char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* Memory not used by the kernel.  */
 static unsigned long total_ram_pages;
@@ -64,8 +64,8 @@ void __init setup_arch (char **cmdline)
 {
 	/* Keep a copy of command line */
 	*cmdline = command_line;
-	memcpy (saved_command_line, command_line, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+	memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
 
 	console_verbose ();
 

[PATCH 25/26] Dynamic kernel command-line - x86_64

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/include/asm-x86_64/bootsetup.h linux-2.6.19/include/asm-x86_64/bootsetup.h
--- linux-2.6.19.org/include/asm-x86_64/bootsetup.h	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/include/asm-x86_64/bootsetup.h	2006-12-02 11:31:33.000000000 +0200
@@ -31,7 +31,7 @@ extern char x86_boot_params[BOOT_PARAM_S
 #define EDD_MBR_SIG_NR (*(unsigned char *) (PARAM+EDD_MBR_SIG_NR_BUF))
 #define EDD_MBR_SIGNATURE ((unsigned int *) (PARAM+EDD_MBR_SIG_BUF))
 #define EDD_BUF     ((struct edd_info *) (PARAM+EDDBUF))
-#define COMMAND_LINE saved_command_line
+#define COMMAND_LINE boot_command_line
 
 #define RAMDISK_IMAGE_START_MASK  	0x07FF
 #define RAMDISK_PROMPT_FLAG		0x8000
diff -urNp linux-2.6.19.org/arch/x86_64/kernel/head64.c linux-2.6.19/arch/x86_64/kernel/head64.c
--- linux-2.6.19.org/arch/x86_64/kernel/head64.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/x86_64/kernel/head64.c	2006-12-02 11:31:33.000000000 +0200
@@ -34,7 +34,7 @@ static void __init clear_bss(void)
 #define OLD_CL_BASE_ADDR        0x90000
 #define OLD_CL_OFFSET           0x90022
 
-extern char saved_command_line[];
+extern char __initdata boot_command_line[];
 
 static void __init copy_bootdata(char *real_mode_data)
 {
@@ -50,7 +50,7 @@ static void __init copy_bootdata(char *r
 		new_data = OLD_CL_BASE_ADDR + * (u16 *) OLD_CL_OFFSET;
 	}
 	command_line = (char *) ((u64)(new_data));
-	memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 }
 
 void __init x86_64_start_kernel(char * real_mode_data)
diff -urNp linux-2.6.19.org/arch/x86_64/kernel/setup.c linux-2.6.19/arch/x86_64/kernel/setup.c
--- linux-2.6.19.org/arch/x86_64/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/x86_64/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -100,7 +100,7 @@ EXPORT_SYMBOL_GPL(edid_info);
 
 extern int root_mountflags;
 
-char command_line[COMMAND_LINE_SIZE];
+char __initdata command_line[COMMAND_LINE_SIZE];
 
 struct resource standard_io_resources[] = {
 	{ .name = "dma1", .start = 0x00, .end = 0x1f,
@@ -343,7 +343,7 @@ static void discover_ebda(void)
 
 void __init setup_arch(char **cmdline_p)
 {
-	printk(KERN_INFO "Command line: %s\n", saved_command_line);
+	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 
  	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
  	screen_info = SCREEN_INFO;
@@ -373,7 +373,7 @@ void __init setup_arch(char **cmdline_p)
 
 	early_identify_cpu(&boot_cpu_data);
 
-	strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
 	parse_early_param();

[PATCH 26/26] Dynamic kernel command-line - xtensa

[Alon Bar-Lev]

1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>

---

diff -urNp linux-2.6.19.org/arch/xtensa/kernel/setup.c linux-2.6.19/arch/xtensa/kernel/setup.c
--- linux-2.6.19.org/arch/xtensa/kernel/setup.c	2006-11-29 23:57:37.000000000 +0200
+++ linux-2.6.19/arch/xtensa/kernel/setup.c	2006-12-02 11:31:33.000000000 +0200
@@ -80,7 +80,7 @@ extern unsigned long loops_per_jiffy;
 
 /* Command line specified as configuration option. */
 
-static char command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
 
 #ifdef CONFIG_CMDLINE_BOOL
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
@@ -255,8 +255,8 @@ void __init setup_arch(char **cmdline_p)
 	extern int mem_reserve(unsigned long, unsigned long, int);
 	extern void bootmem_init(void);
 
-	memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 	*cmdline_p = command_line;
 
 	/* Reserve some memory regions */

[patch 19/26] Dynamic kernel command-line - sh

[Bernhard Walle]

[-- Attachment #1: dynamic-kernel-command-line-sh.diff --]
[-- Type: text/plain, Size: 1360 bytes --]


1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>

---
 arch/sh/kernel/setup.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Index: linux-2.6.20-rc4-mm1/arch/sh/kernel/setup.c
===================================================================
--- linux-2.6.20-rc4-mm1.orig/arch/sh/kernel/setup.c
+++ linux-2.6.20-rc4-mm1/arch/sh/kernel/setup.c
@@ -75,7 +75,7 @@ static struct sh_machine_vector* __init 
 #define RAMDISK_PROMPT_FLAG		0x8000
 #define RAMDISK_LOAD_FLAG		0x4000
 
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
+static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
 
 static struct resource code_resource = { .name = "Kernel code", };
 static struct resource data_resource = { .name = "Kernel data", };
@@ -90,8 +90,8 @@ static inline void parse_cmdline (char *
 	int len = 0;
 
 	/* Save unparsed command line copy for /proc/cmdline */
-	memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
-	saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+	memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
 
 	memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
 	memory_end = memory_start + __MEMORY_SIZE;

--