Re: nforce chipset + dualcore x86-64: Oops, NMI, Null pointer deref, etc

[Bart Trojanowski <bart@jukie.net>]

[-- Attachment #1: Type: text/plain, Size: 1426 bytes --]

* Robert Hancock <hancockr@shaw.ca> [061202 13:33]:
> >[   27.337641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> >[   27.344035] ide: Assuming 33MHz system bus speed for PIO modes; 
> >override with idebus=xx
> >[   27.352191] Probing IDE interface ide0...
> >[   28.145997] hda: PLEXTOR DVDR PX-716AL, ATAPI CD/DVD-ROM drive
> >[   28.457643] Probing IDE interface ide1...
> >[   28.970267] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> 
> Hmm. Something seems missing here. Chipset-specific driver not enabled? 
> I don't see any references to DMA mode or the controller type. It seems 
> like in this case something in drivers/ide is blowing up later on (which 
> shouldn't happen in any case but that code is not the greatest).
> 
> Myself, I would try disabling CONFIG_IDE entirely and enabling the 
> corresponding new libata PATA driver for this chipset's PATA ports (for 
> nForce4 it will be pata_amd). Even if it still doesn't work it may allow 
> the real problem to be diagnosed more easily.

Robert, thanks for taking time to look at the output.

I am not using anything on the PATA chain, other then the DVD drive --
which has sat idle during all of this.

BTW, I did have this in my config already...

CONFIG_ATA=y
CONFIG_SATA_NV=y

Thanks for the suggestion.  I can certainly disable CONFIG_IDE and try
again.

-Bart

-- 
				WebSig: http://www.jukie.net/~bart/sig/

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]