public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Re: Display class
@ 2006-12-06 18:44 Miguel Ojeda Sandonis
  2006-12-06 19:06 ` Miguel Ojeda
  2006-12-07 15:20 ` James Simmons
  0 siblings, 2 replies; 18+ messages in thread
From: Miguel Ojeda Sandonis @ 2006-12-06 18:44 UTC (permalink / raw)
  To: jsimmons; +Cc: linux-kernel, Luming.yu, zap, randy.dunlap, kernel-discuss

Ok, here is the patch (against git7+displayclass) which moves auxdisplay/*
to video/display/* and start using the display class.

It is just a draft, but there isn't much code changed from -mm2.

  - I would remove "struct device *dev, void *devdata" of display_device_register()
    Are they neccesary for other display drivers? I have to pass NULL right now.

  - I would add a paramtere ("char *name") to display_device_register() so we
    set the name when registering. Right now I have to set my name after inited,
    and this is a Linux module and not a person borning, right? ;)

  - I would add a read/writeable attr called "rate" for set/unset the refresh rate
    of a display.

  - I was going to maintain the drivers/auxdisplay/* tree.
    Are you going to maintain the driver? I think so, just for being sure.

P.S.

  When I was working at 2.6.19-rc6-mm2 it worked all fine, but now
  I have copied it to git7 I'm getting some weird segmentation faults
  (oops) when at cfag12864bfb_init, at mutex_lock() in
  display_device_unregister module... I think unrelated (?), but I will
  look for some mistake I made.

miguelojeda-draft-drivers-video-display-add-support.patch
Signed-off-by: Miguel Ojeda Sandonis <maxextreme@gmail.com>
---
diff --git a/CREDITS b/CREDITS
index d088008..b55312a 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2562,6 +2562,16 @@ S: Subiaco, 6008
 S: Perth, Western Australia
 S: Australia
 
+N: Miguel Ojeda Sandonis
+E: maxextreme@gmail.com
+W: http://maxextreme.googlepages.com/
+D: Author: ks0108 LCD Controller driver
+D: Author: cfag12864b LCD driver
+D: Author: cfag12864bfb LCD framebuffer driver
+S: C/ Mieses 20, 9-B
+S: Valladolid 47009
+S: Spain
+
 N: Greg Page
 E: gpage@sovereign.org
 D: IPX development and support
diff --git a/Documentation/display/cfag12864b b/Documentation/display/cfag12864b
new file mode 100644
index 0000000..8b6c01d
--- /dev/null
+++ b/Documentation/display/cfag12864b
@@ -0,0 +1,105 @@
+	===================================
+	cfag12864b LCD Driver Documentation
+	===================================
+
+License:		GPLv2
+Author & Maintainer:	Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Date:			2006-10-31
+
+
+
+--------
+0. INDEX
+--------
+
+	1. DRIVER INFORMATION
+	2. DEVICE INFORMATION
+	3. WIRING
+	4. USERSPACE PROGRAMMING
+
+
+---------------------
+1. DRIVER INFORMATION
+---------------------
+
+This driver support one cfag12864b display at time.
+
+
+---------------------
+2. DEVICE INFORMATION
+---------------------
+
+Manufacturer:	Crystalfontz
+Device Name:	Crystalfontz 12864b LCD Series
+Device Code:	cfag12864b
+Webpage:	http://www.crystalfontz.com
+Device Webpage:	http://www.crystalfontz.com/products/12864b/
+Type:		LCD (Liquid Crystal Display)
+Width:		128
+Height:		64
+Colors:		2 (B/N)
+Controller:	ks0108
+Controllers:	2
+Pages:		8 each controller
+Addresses:	64 each page
+Data size:	1 byte each address
+Memory size:	2 * 8 * 64 * 1 = 1024 bytes = 1 Kbyte
+
+
+---------
+3. WIRING
+---------
+
+The cfag12864b LCD Series don't have official wiring.
+
+The common wiring is done to the parallel port as shown:
+
+Parallel Port                          cfag12864b
+
+  Name Pin#                            Pin# Name
+
+Strobe ( 1)------------------------------(17) Enable
+Data 0 ( 2)------------------------------( 4) Data 0
+Data 1 ( 3)------------------------------( 5) Data 1
+Data 2 ( 4)------------------------------( 6) Data 2
+Data 3 ( 5)------------------------------( 7) Data 3
+Data 4 ( 6)------------------------------( 8) Data 4
+Data 5 ( 7)------------------------------( 9) Data 5
+Data 6 ( 8)------------------------------(10) Data 6
+Data 7 ( 9)------------------------------(11) Data 7
+       (10)                      [+5v]---( 1) Vdd
+       (11)                      [GND]---( 2) Ground
+       (12)                      [+5v]---(14) Reset
+       (13)                      [GND]---(15) Read / Write
+  Line (14)------------------------------(13) Controller Select 1
+       (15)
+  Init (16)------------------------------(12) Controller Select 2
+Select (17)------------------------------(16) Data / Instruction
+Ground (18)---[GND]              [+5v]---(19) LED +
+Ground (19)---[GND]
+Ground (20)---[GND]              E    A             Values:
+Ground (21)---[GND]       [GND]---[P1]---(18) Vee    · R = Resistor = 22 ohm
+Ground (22)---[GND]                |                 · P1 = Preset = 10 Kohm
+Ground (23)---[GND]       ----   S ------( 3) V0     · P2 = Preset = 1 Kohm
+Ground (24)---[GND]       |  |
+Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -
+
+
+------------------------
+4. USERSPACE PROGRAMMING
+------------------------
+
+The cfag12864bfb describes a framebuffer device (/dev/fbX).
+
+It has a size of 1024 bytes = 1 Kbyte.
+Each bit represents one pixel. If the bit is high, the pixel will
+turn on. If the pixel is low, the pixel will turn off.
+
+You can use the framebuffer as a file: fopen, fwrite, fclose...
+Although the LCD won't get updated until the next refresh time arrives.
+
+Also, you can mmap the framebuffer: open & mmap, munmap & close...
+which is the best option for most uses.
+
+Check Documentation/auxdisplay/cfag12864b-example.c
+for a real working userspace complete program with usage examples.
diff --git a/Documentation/display/cfag12864b-example.c b/Documentation/display/cfag12864b-example.c
new file mode 100644
index 0000000..7bfac35
--- /dev/null
+++ b/Documentation/display/cfag12864b-example.c
@@ -0,0 +1,282 @@
+/*
+ *    Filename: cfag12864b-example.c
+ *     Version: 0.1.0
+ * Description: cfag12864b LCD userspace example program
+ *     License: GPLv2
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *        Date: 2006-10-31
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/*
+ * ------------------------
+ * start of cfag12864b code
+ * ------------------------
+ */
+
+#include <string.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+
+#define CFAG12864B_WIDTH		(128)
+#define CFAG12864B_HEIGHT		(64)
+#define CFAG12864B_SIZE			(128 * 64 / 8)
+#define CFAG12864B_BPB			(8)
+#define CFAG12864B_ADDRESS(x, y)	((y) * CFAG12864B_WIDTH / \
+					CFAG12864B_BPB + (x) / CFAG12864B_BPB)
+#define CFAG12864B_BIT(n)		(((unsigned char) 1) << (n))
+
+#undef CFAG12864B_DOCHECK
+#ifdef CFAG12864B_DOCHECK
+	#define CFAG12864B_CHECK(x, y)		((x) < CFAG12864B_WIDTH && \
+						(y) < CFAG12864B_HEIGHT)
+#else
+	#define CFAG12864B_CHECK(x, y)		(1)
+#endif
+
+int cfag12864b_fd;
+unsigned char * cfag12864b_mem;
+unsigned char cfag12864b_buffer[CFAG12864B_SIZE];
+
+/*
+ * init a cfag12864b framebuffer device
+ *
+ * No error:       return = 0
+ * Unable to open: return = -1
+ * Unable to mmap: return = -2
+ */
+int cfag12864b_init(char *path)
+{
+	cfag12864b_fd = open(path, O_RDWR);
+	if (cfag12864b_fd == -1)
+		return -1;
+
+	cfag12864b_mem = mmap(0, CFAG12864B_SIZE, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cfag12864b_fd, 0);
+	if (cfag12864b_mem == MAP_FAILED) {
+		close(cfag12864b_fd);
+		return -2;
+	}
+
+	return 0;
+}
+
+/*
+ * exit a cfag12864b framebuffer device
+ */
+void cfag12864b_exit(void)
+{
+	munmap(cfag12864b_mem, CFAG12864B_SIZE);
+	close(cfag12864b_fd);
+}
+
+/*
+ * set (x, y) pixel
+ */
+void cfag12864b_set(unsigned char x, unsigned char y)
+{
+	if (CFAG12864B_CHECK(x, y))
+		cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] |=
+			CFAG12864B_BIT(x % CFAG12864B_BPB);
+}
+
+/*
+ * unset (x, y) pixel
+ */
+void cfag12864b_unset(unsigned char x, unsigned char y)
+{
+	if (CFAG12864B_CHECK(x, y))
+		cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] &=
+			~CFAG12864B_BIT(x % CFAG12864B_BPB);
+}
+
+/*
+ * is set (x, y) pixel?
+ *
+ * Pixel off: return = 0
+ * Pixel on:  return = 1
+ */
+unsigned char cfag12864b_isset(unsigned char x, unsigned char y)
+{
+	if (CFAG12864B_CHECK(x, y))
+		if (cfag12864b_buffer[CFAG12864B_ADDRESS(x, y)] &
+			CFAG12864B_BIT(x % CFAG12864B_BPB))
+			return 1;
+
+	return 0;
+}
+
+/*
+ * not (x, y) pixel
+ */
+void cfag12864b_not(unsigned char x, unsigned char y)
+{
+	if (cfag12864b_isset(x, y))
+		cfag12864b_unset(x, y);
+	else
+		cfag12864b_set(x, y);
+}
+
+/*
+ * fill (set all pixels)
+ */
+void cfag12864b_fill(void)
+{
+	unsigned short i;
+
+	for (i = 0; i < CFAG12864B_SIZE; i++)
+		cfag12864b_buffer[i] = 0xFF;
+}
+
+/*
+ * clear (unset all pixels)
+ */
+void cfag12864b_clear(void)
+{
+	unsigned short i;
+
+	for (i = 0; i < CFAG12864B_SIZE; i++)
+		cfag12864b_buffer[i] = 0;
+}
+
+/*
+ * format a [128*64] matrix
+ *
+ * Pixel off: src[i] = 0
+ * Pixel on:  src[i] > 0
+ */
+void cfag12864b_format(unsigned char * matrix)
+{
+	unsigned char i, j, n;
+
+	for (i = 0; i < CFAG12864B_HEIGHT; i++)
+	for (j = 0; j < CFAG12864B_WIDTH / CFAG12864B_BPB; j++) {
+		cfag12864b_buffer[i * CFAG12864B_WIDTH / CFAG12864B_BPB +
+			j] = 0;
+		for (n = 0; n < CFAG12864B_BPB; n++)
+			if (matrix[i * CFAG12864B_WIDTH +
+				j * CFAG12864B_BPB + n])
+				cfag12864b_buffer[i * CFAG12864B_WIDTH /
+					CFAG12864B_BPB + j] |=
+					CFAG12864B_BIT(n);
+	}
+}
+
+/*
+ * blit buffer to lcd
+ */
+void cfag12864b_blit(void)
+{
+	memcpy(cfag12864b_mem, cfag12864b_buffer, CFAG12864B_SIZE);
+}
+
+/*
+ * ----------------------
+ * end of cfag12864b code
+ * ----------------------
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#define EXAMPLES	6
+
+void example(unsigned char n)
+{
+	unsigned short i, j;
+	unsigned char matrix[CFAG12864B_WIDTH * CFAG12864B_HEIGHT];
+
+	if (n > EXAMPLES)
+		return;
+
+	printf("Example %i/%i - ", n, EXAMPLES);
+
+	switch (n) {
+	case 1:
+		printf("Draw points setting bits");
+		cfag12864b_clear();
+		for (i = 0; i < CFAG12864B_WIDTH; i += 2)
+			for (j = 0; j < CFAG12864B_HEIGHT; j += 2)
+				cfag12864b_set(i, j);
+		break;
+
+	case 2:
+		printf("Clear the LCD");
+		cfag12864b_clear();
+		break;
+
+	case 3:
+		printf("Draw rows formatting a [128*64] matrix");
+		memset(matrix, 0, CFAG12864B_WIDTH * CFAG12864B_HEIGHT);
+		for (i = 0; i < CFAG12864B_WIDTH; i++)
+			for (j = 0; j < CFAG12864B_HEIGHT; j += 2)
+				matrix[j * CFAG12864B_WIDTH + i] = 1;
+		cfag12864b_format(matrix);
+		break;
+
+	case 4:
+		printf("Fill the lcd");
+		cfag12864b_fill();
+		break;
+
+	case 5:
+		printf("Draw columns unsetting bits");
+		for (i = 0; i < CFAG12864B_WIDTH; i += 2)
+			for (j = 0; j < CFAG12864B_HEIGHT; j++)
+				cfag12864b_unset(i, j);
+		break;
+
+	case 6:
+		printf("Do negative not-ing all bits");
+		for (i = 0; i < CFAG12864B_WIDTH; i++)
+			for (j = 0; j < CFAG12864B_HEIGHT; j ++)
+				cfag12864b_not(i, j);
+		break;
+	}
+
+	puts(" - [Press Enter]");
+}
+
+int main(int argc, char *argv[])
+{
+	unsigned char n;
+
+	if (argc != 2) {
+		printf(
+			"Sintax:  %s fbdev\n"
+			"Usually: /dev/fb0, /dev/fb1...\n", argv[0]);
+		return -1;
+	}
+
+	if (cfag12864b_init(argv[1])) {
+		printf("Can't init %s fbdev\n", argv[1]);
+		return -2;
+	}
+
+	for (n = 1; n <= EXAMPLES; n++) {
+		example(n);
+		cfag12864b_blit();
+		while (getchar() != '\n');
+	}
+
+	cfag12864b_exit();
+
+	return 0;
+}
diff --git a/Documentation/display/ks0108 b/Documentation/display/ks0108
new file mode 100644
index 0000000..a006f79
--- /dev/null
+++ b/Documentation/display/ks0108
@@ -0,0 +1,55 @@
+	==========================================
+	ks0108 LCD Controller Driver Documentation
+	==========================================
+
+License:		GPLv2
+Author & Maintainer:	Miguel Ojeda Sandonis <maxextreme@gmail.com>
+Date:			2006-10-31
+
+
+
+--------
+0. INDEX
+--------
+
+	1. DRIVER INFORMATION
+	2. DEVICE INFORMATION
+	3. WIRING
+
+
+---------------------
+1. DRIVER INFORMATION
+---------------------
+
+This driver support the ks0108 LCD controller.
+
+
+---------------------
+2. DEVICE INFORMATION
+---------------------
+
+Manufacturer:	Samsung
+Device Name:	KS0108 LCD Controller
+Device Code:	ks0108
+Webpage:	-
+Device Webpage:	-
+Type:		LCD Controller (Liquid Crystal Display Controller)
+Width:		64
+Height:		64
+Colors:		2 (B/N)
+Pages:		8
+Addresses:	64 each page
+Data size:	1 byte each address
+Memory size:	8 * 64 * 1 = 512 bytes
+
+
+---------
+3. WIRING
+---------
+
+The driver supports data parallel port wiring.
+
+If you aren't building LCD related hardware, you should check
+your LCD specific wiring information in the same folder.
+
+For example, check Documentation/display/cfag12864b.
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dff268..e31e0bf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -659,6 +659,20 @@ L:	linux-kernel@vger.kernel.org
 L:	discuss@x86-64.org
 S:	Maintained
 
+CFAG12864B LCD DRIVER
+P:	Miguel Ojeda Sandonis
+M:	maxextreme@gmail.com
+W:	http://maxextreme.googlepages.com/display.htm
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
+CFAG12864BFB LCD FRAMEBUFFER DRIVER
+P:	Miguel Ojeda Sandonis
+M:	maxextreme@gmail.com
+W:	http://maxextreme.googlepages.com/display.htm
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 COMMON INTERNET FILE SYSTEM (CIFS)
 P:	Steve French
 M:	sfrench@samba.org
@@ -1752,6 +1766,13 @@ M:	davem@davemloft.net
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+KS0108 LCD CONTROLLER DRIVER
+P:	Miguel Ojeda Sandonis
+M:	maxextreme@gmail.com
+W:	http://maxextreme.googlepages.com/display.htm
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 LAPB module
 L:	linux-x25@vger.kernel.org
 S:	Orphan
diff --git a/drivers/video/display/Kconfig b/drivers/video/display/Kconfig
index db2dae4..0c655a5 100644
--- a/drivers/video/display/Kconfig
+++ b/drivers/video/display/Kconfig
@@ -26,4 +26,102 @@ config DISPLAY_DDC
 comment "Display hardware drivers"
 	depends on DISPLAY_SUPPORT
 
+config KS0108
+	tristate "KS0108 LCD Controller"
+	depends on PARPORT_PC
+	depends on DISPLAY_SUPPORT
+	default n
+	---help---
+	  If you have a LCD controlled by one or more KS0108
+	  controllers, say Y. You will need also another more specific
+	  driver for your LCD.
+
+	  Depends on Parallel Port support. If you say Y at
+	  parport, you will be able to compile this as a module (M)
+	  and built-in as well (Y).
+
+	  To compile this as a module, choose M here:
+	  the module will be called ks0108.
+
+	  If unsure, say N.
+
+config KS0108_PORT
+	hex "Parallel port where the LCD is connected"
+	depends on KS0108
+	default 0x378
+	---help---
+	  The address of the parallel port where the LCD is connected.
+
+	  The first  standard parallel port address is 0x378.
+	  The second standard parallel port address is 0x278.
+	  The third  standard parallel port address is 0x3BC.
+
+	  You can specify a different address if you need.
+
+	  If you don't know what I'm talking about, load the parport module,
+	  and execute "dmesg" or "cat /proc/ioports". You can see there how
+	  many parallel ports are present and which address each one has.
+
+	  Usually you only need to use 0x378.
+
+	  If you compile this as a module, you can still override this
+	  using the module parameters.
+
+config KS0108_DELAY
+	int "Delay between each control writing (microseconds)"
+	depends on KS0108
+	default "2"
+	---help---
+	  Amount of time the ks0108 should wait between each control write
+	  to the parallel port.
+
+	  If your driver seems to miss random writings, increment this.
+
+	  If you don't know what I'm talking about, ignore it.
+
+	  If you compile this as a module, you can still override this
+	  value using the module parameters.
+
+config CFAG12864B
+	tristate "CFAG12864B LCD"
+	depends on X86
+	depends on KS0108
+	default n
+	---help---
+	  If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
+	  say Y. You also need the ks0108 LCD Controller driver.
+
+	  For help about how to wire your LCD to the parallel port,
+	  check Documentation/auxdisplay/cfag12864b
+
+	  The LCD framebuffer driver can be attached to a console.
+	  It will work fine. However, you can't attach it to the fbdev driver
+	  of the xorg server.
+
+	  To compile this as a module, choose M here:
+	  the modules will be called cfag12864b and cfag12864bfb.
+
+	  If unsure, say N.
+
+config CFAG12864B_RATE
+	int "Refresh rate (hertzs)"
+	depends on CFAG12864B
+	default "20"
+	---help---
+	  Refresh rate of the LCD.
+
+	  As the LCD is not memory mapped, the driver has to make the work by
+	  software. This means you should be careful setting this value higher.
+	  If your CPUs are really slow or you feel the system is slowed down,
+	  decrease the value.
+
+	  Be careful modifying this value to a very high value:
+	  You can freeze the computer, or the LCD maybe can't draw as fast as you
+	  are requesting.
+
+	  If you don't know what I'm talking about, ignore it.
+
+	  If you compile this as a module, you can still override this
+	  value using the module parameters.
+
 endmenu
diff --git a/drivers/video/display/Makefile b/drivers/video/display/Makefile
index d210f52..fc9f7dd 100644
--- a/drivers/video/display/Makefile
+++ b/drivers/video/display/Makefile
@@ -5,3 +5,6 @@ display-objs				:= display-sysfs.o 
 obj-$(CONFIG_DISPLAY_SUPPORT)		+= display.o
 
 obj-$(CONFIG_DISPLAY_DDC)		+= display-ddc.o
+
+obj-$(CONFIG_KS0108)			+= ks0108.o
+obj-$(CONFIG_CFAG12864B)		+= cfag12864b.o cfag12864bfb.o
diff --git a/drivers/video/display/cfag12864b.c b/drivers/video/display/cfag12864b.c
new file mode 100644
index 0000000..1a25df9
--- /dev/null
+++ b/drivers/video/display/cfag12864b.c
@@ -0,0 +1,404 @@
+/*
+ *    Filename: cfag12864b.c
+ *     Version: 0.1.0
+ * Description: cfag12864b LCD driver
+ *     License: GPLv2
+ *     Depends: ks0108
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *        Date: 2006-10-31
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <linux/ks0108.h>
+#include <linux/cfag12864b.h>
+
+
+#define CFAG12864B_NAME "cfag12864b"
+
+/*
+ * Module Parameters
+ */
+
+static unsigned int cfag12864b_rate = CONFIG_CFAG12864B_RATE;
+module_param(cfag12864b_rate, uint, S_IRUGO);
+MODULE_PARM_DESC(cfag12864b_rate,
+	"Refresh rate (hertzs)");
+
+unsigned int cfag12864b_get_rate(void)
+{
+	return cfag12864b_rate;
+}
+
+/*
+ * cfag12864b Commands
+ *
+ *	E = Enable signal
+ *		Everytime E switch from low to high,
+ *		cfag12864b/ks0108 reads the command/data.
+ *
+ *	CS1 = First ks0108controller.
+ *		If high, the first ks0108 controller receives commands/data.
+ *
+ *	CS2 = Second ks0108 controller
+ *		If high, the second ks0108 controller receives commands/data.
+ *
+ *	DI = Data/Instruction
+ *		If low, cfag12864b will expect commands.
+ *		If high, cfag12864b will expect data.
+ *
+ */
+
+#define bit(n) (((unsigned char)1)<<(n))
+
+#define CFAG12864B_BIT_E	(0)
+#define CFAG12864B_BIT_CS1	(2)
+#define CFAG12864B_BIT_CS2	(1)
+#define CFAG12864B_BIT_DI	(3)
+
+static unsigned char cfag12864b_state;
+
+static void cfag12864b_set(void)
+{
+	ks0108_writecontrol(cfag12864b_state);
+}
+
+static void cfag12864b_setbit(unsigned char state, unsigned char n)
+{
+	if (state)
+		cfag12864b_state |= bit(n);
+	else
+		cfag12864b_state &= ~bit(n);
+}
+
+static void cfag12864b_e(unsigned char state)
+{
+	cfag12864b_setbit(state, CFAG12864B_BIT_E);
+	cfag12864b_set();
+}
+
+static void cfag12864b_cs1(unsigned char state)
+{
+	cfag12864b_setbit(state, CFAG12864B_BIT_CS1);
+}
+
+static void cfag12864b_cs2(unsigned char state)
+{
+	cfag12864b_setbit(state, CFAG12864B_BIT_CS2);
+}
+
+static void cfag12864b_di(unsigned char state)
+{
+	cfag12864b_setbit(state, CFAG12864B_BIT_DI);
+}
+
+static void cfag12864b_setcontrollers(unsigned char first,
+	unsigned char second)
+{
+	if (first)
+		cfag12864b_cs1(0);
+	else
+		cfag12864b_cs1(1);
+
+	if (second)
+		cfag12864b_cs2(0);
+	else
+		cfag12864b_cs2(1);
+}
+
+static void cfag12864b_controller(unsigned char which)
+{
+	if (which == 0)
+		cfag12864b_setcontrollers(1, 0);
+	else if (which == 1)
+		cfag12864b_setcontrollers(0, 1);
+}
+
+static void cfag12864b_displaystate(unsigned char state)
+{
+	cfag12864b_di(0);
+	cfag12864b_e(1);
+	ks0108_displaystate(state);
+	cfag12864b_e(0);
+}
+
+static void cfag12864b_address(unsigned char address)
+{
+	cfag12864b_di(0);
+	cfag12864b_e(1);
+	ks0108_address(address);
+	cfag12864b_e(0);
+}
+
+static void cfag12864b_page(unsigned char page)
+{
+	cfag12864b_di(0);
+	cfag12864b_e(1);
+	ks0108_page(page);
+	cfag12864b_e(0);
+}
+
+static void cfag12864b_startline(unsigned char startline)
+{
+	cfag12864b_di(0);
+	cfag12864b_e(1);
+	ks0108_startline(startline);
+	cfag12864b_e(0);
+}
+
+static void cfag12864b_writebyte(unsigned char byte)
+{
+	cfag12864b_di(1);
+	cfag12864b_e(1);
+	ks0108_writedata(byte);
+	cfag12864b_e(0);
+}
+
+static void cfag12864b_nop(void)
+{
+	cfag12864b_startline(0);
+}
+
+/*
+ * cfag12864b Internal Commands
+ */
+
+static void cfag12864b_on(void)
+{
+	cfag12864b_setcontrollers(1, 1);
+	cfag12864b_displaystate(1);
+}
+
+static void cfag12864b_off(void)
+{
+	cfag12864b_setcontrollers(1, 1);
+	cfag12864b_displaystate(0);
+}
+
+static void cfag12864b_clear(void)
+{
+	unsigned char i, j;
+
+	cfag12864b_setcontrollers(1, 1);
+	for (i = 0; i < CFAG12864B_PAGES; i++) {
+		cfag12864b_page(i);
+		cfag12864b_address(0);
+		for (j = 0; j < CFAG12864B_ADDRESSES; j++)
+			cfag12864b_writebyte(0);
+	}
+}
+
+/*
+ * Update work
+ */
+
+unsigned char *cfag12864b_buffer;
+static unsigned char *cfag12864b_cache;
+static DEFINE_MUTEX(cfag12864b_mutex);
+static unsigned char cfag12864b_updating;
+static void cfag12864b_update(void *arg);
+static struct workqueue_struct *cfag12864b_workqueue;
+static DECLARE_WORK(cfag12864b_work, cfag12864b_update, NULL);
+
+static void cfag12864b_queue(void)
+{
+	queue_delayed_work(cfag12864b_workqueue, &cfag12864b_work,
+		HZ / cfag12864b_rate);
+}
+
+void cfag12864b_power_on(void)
+{
+	mutex_lock(&cfag12864b_mutex);
+
+	cfag12864b_on();
+
+	mutex_unlock(&cfag12864b_mutex);
+}
+
+void cfag12864b_power_off(void)
+{
+	mutex_lock(&cfag12864b_mutex);
+
+	cfag12864b_off();
+
+	mutex_unlock(&cfag12864b_mutex);
+}
+
+unsigned char cfag12864b_enable(void)
+{
+	unsigned char ret;
+
+	mutex_lock(&cfag12864b_mutex);
+
+	if (!cfag12864b_updating) {
+		cfag12864b_updating = 1;
+		cfag12864b_queue();
+		ret = 0;
+	} else
+		ret = 1;
+
+	mutex_unlock(&cfag12864b_mutex);
+
+	return ret;
+}
+
+void cfag12864b_disable(void)
+{
+	mutex_lock(&cfag12864b_mutex);
+
+	if (cfag12864b_updating) {
+		cfag12864b_updating = 0;
+		cancel_delayed_work(&cfag12864b_work);
+		flush_workqueue(cfag12864b_workqueue);
+		cfag12864b_off();
+	}
+
+	mutex_unlock(&cfag12864b_mutex);
+}
+
+unsigned char cfag12864b_is_enabled(void)
+{
+	return cfag12864b_updating;
+}
+
+static void cfag12864b_update(void *arg)
+{
+	unsigned char c;
+	unsigned short i, j, k, b;
+
+	if (memcmp(cfag12864b_cache, cfag12864b_buffer, CFAG12864B_SIZE)) {
+		for (i = 0; i < CFAG12864B_CONTROLLERS; i++) {
+			cfag12864b_controller(i);
+			cfag12864b_nop();
+			for (j = 0; j < CFAG12864B_PAGES; j++) {
+				cfag12864b_page(j);
+				cfag12864b_nop();
+				cfag12864b_address(0);
+				cfag12864b_nop();
+				for (k = 0; k < CFAG12864B_ADDRESSES; k++) {
+					for (c = 0, b = 0; b < 8; b++)
+						if (cfag12864b_buffer
+							[i * CFAG12864B_ADDRESSES / 8
+							+ k / 8 + (j * 8 + b) *
+							CFAG12864B_WIDTH / 8]
+							& bit(k % 8))
+							c |= bit(b);
+					cfag12864b_writebyte(c);
+				}
+			}
+		}
+
+		memcpy(cfag12864b_cache, cfag12864b_buffer, CFAG12864B_SIZE);
+	}
+
+	if (cfag12864b_updating)
+		cfag12864b_queue();
+}
+
+/*
+ * cfag12864b Exported Symbols
+ */
+
+EXPORT_SYMBOL_GPL(cfag12864b_buffer);
+EXPORT_SYMBOL_GPL(cfag12864b_get_rate);
+EXPORT_SYMBOL_GPL(cfag12864b_power_on);
+EXPORT_SYMBOL_GPL(cfag12864b_power_off);
+EXPORT_SYMBOL_GPL(cfag12864b_enable);
+EXPORT_SYMBOL_GPL(cfag12864b_disable);
+EXPORT_SYMBOL_GPL(cfag12864b_is_enabled);
+
+/*
+ * Module Init & Exit
+ */
+
+static int __init cfag12864b_init(void)
+{
+	int ret = -EINVAL;
+
+	if (PAGE_SIZE < CFAG12864B_SIZE) {
+		printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
+			"page size (%i) < cfag12864b size (%i)\n",
+			(unsigned int)PAGE_SIZE, CFAG12864B_SIZE);
+		ret = -ENOMEM;
+		goto none;
+	}
+
+	cfag12864b_buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
+	if (cfag12864b_buffer == NULL) {
+		printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
+			"can't get a free page\n");
+		ret = -ENOMEM;
+		goto none;
+	}
+
+	cfag12864b_cache = kmalloc(sizeof(unsigned char) *
+		CFAG12864B_SIZE, GFP_KERNEL);
+	if (cfag12864b_buffer == NULL) {
+		printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
+			"can't alloc cache buffer (%i bytes)\n",
+			CFAG12864B_SIZE);
+		ret = -ENOMEM;
+		goto bufferalloced;
+	}
+
+	cfag12864b_workqueue = create_singlethread_workqueue(CFAG12864B_NAME);
+	if (cfag12864b_workqueue == NULL)
+		goto cachealloced;
+
+	memset(cfag12864b_buffer, 0, CFAG12864B_SIZE);
+
+	cfag12864b_clear();
+	cfag12864b_on();
+
+	return 0;
+
+cachealloced:
+	kfree(cfag12864b_cache);
+
+bufferalloced:
+	free_page((unsigned long) cfag12864b_buffer);
+
+none:
+	return ret;
+}
+
+static void __exit cfag12864b_exit(void)
+{
+	cfag12864b_disable();
+	cfag12864b_off();
+	destroy_workqueue(cfag12864b_workqueue);
+	kfree(cfag12864b_cache);
+	free_page((unsigned long) cfag12864b_buffer);
+}
+
+module_init(cfag12864b_init);
+module_exit(cfag12864b_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_DESCRIPTION("cfag12864b LCD driver");
diff --git a/drivers/video/display/cfag12864bfb.c b/drivers/video/display/cfag12864bfb.c
new file mode 100644
index 0000000..e51655f
--- /dev/null
+++ b/drivers/video/display/cfag12864bfb.c
@@ -0,0 +1,205 @@
+/*
+ *    Filename: cfag12864bfb.c
+ *     Version: 0.1.0
+ * Description: cfag12864b LCD framebuffer driver
+ *     License: GPLv2
+ *     Depends: cfag12864b
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *        Date: 2006-10-31
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/display.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/cfag12864b.h>
+
+#define CFAG12864BFB_NAME "cfag12864bfb"
+
+static struct fb_info *fb;
+
+static char cfag12864bfb_name[] = CFAG12864BFB_NAME;
+static int cfag12864bfb_power;
+
+static struct fb_fix_screeninfo cfag12864bfb_fix __initdata = {
+	.id = CFAG12864BFB_NAME,
+	.type = FB_TYPE_PACKED_PIXELS,
+	.visual = FB_VISUAL_MONO10,
+	.xpanstep = 0,
+	.ypanstep = 0,
+	.ywrapstep = 0,
+	.line_length = CFAG12864B_WIDTH / 8,
+	.accel = FB_ACCEL_NONE,
+};
+
+static struct fb_var_screeninfo cfag12864bfb_var __initdata = {
+	.xres = CFAG12864B_WIDTH,
+	.yres = CFAG12864B_HEIGHT,
+	.xres_virtual = CFAG12864B_WIDTH,
+	.yres_virtual = CFAG12864B_HEIGHT,
+	.bits_per_pixel = 1,
+	.red = { 0, 1, 0 },
+      	.green = { 0, 1, 0 },
+      	.blue = { 0, 1, 0 },
+	.left_margin = 0,
+	.right_margin = 0,
+	.upper_margin = 0,
+	.lower_margin = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+};
+
+static int cfag12864bfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	return vm_insert_page(vma, vma->vm_start,
+		virt_to_page(cfag12864b_buffer));
+}
+
+static struct fb_ops cfag12864bfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_mmap = cfag12864bfb_mmap,
+};
+
+static int cfag12864bfb_set_power(struct display_device *device)
+{
+	if (device->request_state > 0) {
+		cfag12864bfb_power = 1;
+		cfag12864b_power_on();
+	} else {
+		cfag12864bfb_power = 0;
+		cfag12864b_power_off();
+	}
+
+	return 0;
+}
+
+static int cfag12864bfb_get_power(struct display_device *device)
+{
+	return cfag12864bfb_power;
+}
+
+static int cfag12864bfb_probe(struct display_device *device, void *data)
+{
+	return 0;
+}
+
+static int cfag12864bfb_remove(struct display_device *device)
+{
+	return 0;
+}
+
+static struct display_driver cfag12864bfb_driver = {
+	.set_power = cfag12864bfb_set_power,
+	.get_power = cfag12864bfb_get_power,
+	.probe	= cfag12864bfb_probe,
+	.remove = cfag12864bfb_remove,
+};
+
+static struct display_device *cfag12864bfb_device;
+
+static int __init cfag12864bfb_init(void)
+{
+	int ret = -EINVAL;
+
+	if (cfag12864b_enable()) {
+		printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: "
+			"can't enable cfag12864b refreshing (being used)\n");
+		ret = -ENODEV;
+		goto none;
+	}
+
+	fb = framebuffer_alloc(0, NULL);
+	if (!fb) {
+		printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: "
+			"can't alloc framebuffer\n");
+		ret = -ENODEV;
+		goto enabled;
+	}
+
+	fb->screen_base = (char __iomem *) cfag12864b_buffer;
+	fb->screen_size = CFAG12864B_SIZE;
+	fb->fbops = &cfag12864bfb_ops;
+	fb->fix = cfag12864bfb_fix;
+	fb->var = cfag12864bfb_var;
+	fb->pseudo_palette = NULL;
+	fb->par = NULL;
+	fb->flags = FBINFO_FLAG_DEFAULT;
+
+	if (register_framebuffer(fb) < 0) {
+		printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: "
+			"can't register framebuffer\n");
+		ret = -ENODEV;
+		goto fballoced;
+	}
+
+	cfag12864bfb_device = display_device_register(&cfag12864bfb_driver,
+		NULL, NULL);
+	if (!cfag12864bfb_device) {
+		printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: "
+			"can't register display device\n");
+		ret = -ENODEV;
+		goto fbregistered;
+	}
+
+	cfag12864bfb_device->name = cfag12864bfb_name;
+	cfag12864bfb_device->owner = THIS_MODULE;
+	cfag12864bfb_device->request_state = cfag12864bfb_power = 1;
+
+	cfag12864b_power_on();
+
+	printk(KERN_INFO "fb%d: %s framebuffer device\n", fb->node,
+		fb->fix.id);
+
+	return 0;
+
+fbregistered:
+	unregister_framebuffer(fb);
+
+fballoced:
+	framebuffer_release(fb);
+
+enabled:
+	cfag12864b_disable();
+
+none:
+	return ret;
+}
+
+static void __exit cfag12864bfb_exit(void)
+{
+	display_device_unregister(cfag12864bfb_device);
+	unregister_framebuffer(fb);
+	framebuffer_release(fb);
+	cfag12864b_disable();
+}
+
+module_init(cfag12864bfb_init);
+module_exit(cfag12864bfb_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_DESCRIPTION("cfag12864bfb LCD framebuffer driver");
diff --git a/drivers/video/display/ks0108.c b/drivers/video/display/ks0108.c
new file mode 100644
index 0000000..a637575
--- /dev/null
+++ b/drivers/video/display/ks0108.c
@@ -0,0 +1,166 @@
+/*
+ *    Filename: ks0108.c
+ *     Version: 0.1.0
+ * Description: ks0108 LCD Controller driver
+ *     License: GPLv2
+ *     Depends: parport
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *        Date: 2006-10-31
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/parport.h>
+#include <linux/uaccess.h>
+#include <linux/ks0108.h>
+
+#define KS0108_NAME "ks0108"
+
+/*
+ * Module Parameters
+ */
+
+static unsigned int ks0108_port = CONFIG_KS0108_PORT;
+module_param(ks0108_port, uint, S_IRUGO);
+MODULE_PARM_DESC(ks0108_port, "Parallel port where the LCD is connected");
+
+static unsigned int ks0108_delay = CONFIG_KS0108_DELAY;
+module_param(ks0108_delay, uint, S_IRUGO);
+MODULE_PARM_DESC(ks0108_delay, "Delay between each control writing (microseconds)");
+
+/*
+ * Device
+ */
+
+static struct parport *ks0108_parport;
+static struct pardevice *ks0108_pardevice;
+
+/*
+ * ks0108 Exported Commands (don't lock)
+ *
+ *   You _should_ lock in the top driver: This functions _should not_
+ *   get race conditions in any way. Locking for each byte here would be
+ *   so slow and useless.
+ *
+ *   There are not bit definitions because they are not flags,
+ *   just arbitrary combinations defined by the documentation for each
+ *   function in the ks0108 LCD controller. If you want to know what means
+ *   a specific combination, look at the function's name.
+ *
+ *   The ks0108_writecontrol bits need to be reverted ^(0,1,3) because
+ *   the parallel port also revert them using a "not" logic gate.
+ */
+
+#define bit(n) (((unsigned char)1)<<(n))
+
+void ks0108_writedata(unsigned char byte)
+{
+	parport_write_data(ks0108_parport, byte);
+}
+
+void ks0108_writecontrol(unsigned char byte)
+{
+	udelay(ks0108_delay);
+	parport_write_control(ks0108_parport, byte ^ (bit(0) | bit(1) | bit(3)));
+}
+
+void ks0108_displaystate(unsigned char state)
+{
+	ks0108_writedata((state ? bit(0) : 0) | bit(1) | bit(2) | bit(3) | bit(4) | bit(5));
+}
+
+void ks0108_startline(unsigned char startline)
+{
+	ks0108_writedata(min(startline,(unsigned char)63) | bit(6) | bit(7));
+}
+
+void ks0108_address(unsigned char address)
+{
+	ks0108_writedata(min(address,(unsigned char)63) | bit(6));
+}
+
+void ks0108_page(unsigned char page)
+{
+	ks0108_writedata(min(page,(unsigned char)7) | bit(3) | bit(4) | bit(5) | bit(7));
+}
+
+EXPORT_SYMBOL_GPL(ks0108_writedata);
+EXPORT_SYMBOL_GPL(ks0108_writecontrol);
+EXPORT_SYMBOL_GPL(ks0108_displaystate);
+EXPORT_SYMBOL_GPL(ks0108_startline);
+EXPORT_SYMBOL_GPL(ks0108_address);
+EXPORT_SYMBOL_GPL(ks0108_page);
+
+/*
+ * Module Init & Exit
+ */
+
+static int __init ks0108_init(void)
+{
+	int result;
+	int ret = -EINVAL;
+
+	ks0108_parport = parport_find_base(ks0108_port);
+	if (ks0108_parport == NULL) {
+		printk(KERN_ERR KS0108_NAME ": ERROR: "
+			"parport didn't find %i port\n", ks0108_port);
+		goto none;
+	}
+
+	ks0108_pardevice = parport_register_device(ks0108_parport, KS0108_NAME,
+		NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+	if (ks0108_pardevice == NULL) {
+		printk(KERN_ERR KS0108_NAME ": ERROR: "
+			"parport didn't register new device\n");
+		goto none;
+	}
+
+	result = parport_claim(ks0108_pardevice);
+	if (result != 0) {
+		printk(KERN_ERR KS0108_NAME ": ERROR: "
+			"can't claim %i parport, maybe in use\n", ks0108_port);
+		ret = result;
+		goto registered;
+	}
+
+	return 0;
+
+registered:
+	parport_unregister_device(ks0108_pardevice);
+
+none:
+	return ret;
+}
+
+static void __exit ks0108_exit(void)
+{
+	parport_release(ks0108_pardevice);
+	parport_unregister_device(ks0108_pardevice);
+}
+
+module_init(ks0108_init);
+module_exit(ks0108_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_DESCRIPTION("ks0108 LCD Controller driver");
+
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
new file mode 100644
index 0000000..5174670
--- /dev/null
+++ b/include/linux/cfag12864b.h
@@ -0,0 +1,91 @@
+/*
+ *    Filename: cfag12864b.h
+ *     Version: 0.1.0
+ * Description: cfag12864b LCD driver header
+ *     License: GPLv2
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *        Date: 2006-12-06
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _CFAG12864B_H_
+#define _CFAG12864B_H_
+
+#define CFAG12864B_WIDTH	(128)
+#define CFAG12864B_HEIGHT	(64)
+#define CFAG12864B_CONTROLLERS	(2)
+#define CFAG12864B_PAGES	(8)
+#define CFAG12864B_ADDRESSES	(64)
+#define CFAG12864B_SIZE		((CFAG12864B_CONTROLLERS) * \
+				(CFAG12864B_PAGES) * \
+				(CFAG12864B_ADDRESSES))
+
+/*
+ * The driver will blit this buffer to the LCD
+ *
+ * Its size is CFAG12864B_SIZE.
+ */
+extern unsigned char * cfag12864b_buffer;
+
+/*
+ * Get the refresh rate of the LCD
+ *
+ * Returns the refresh rate (hertzs).
+ */
+extern unsigned int cfag12864b_get_rate(void);
+
+/*
+ * Power on the LCD
+ *
+ * Screen memory will be showed
+ */
+extern void cfag12864b_power_on(void);
+
+/*
+ * Power off the LCD
+ *
+ * Screen memory won't be showed
+ */
+extern void cfag12864b_power_off(void);
+
+/*
+ * Enable refreshing
+ *
+ * Returns 0 if successful (anyone was using it),
+ * or != 0 if failed (someone is using it).
+ */
+extern unsigned char cfag12864b_enable(void);
+
+/*
+ * Disable refreshing
+ *
+ * You should call this only when you finish using the LCD.
+ */
+extern void cfag12864b_disable(void);
+
+/*
+ * Is enabled refreshing? (is anyone using the module?)
+ *
+ * Returns 0 if refreshing is not enabled (anyone is using it),
+ * or != 0 if refreshing is enabled (someone is using it).
+ *
+ * Useful for buffer read-only modules.
+ */
+extern unsigned char cfag12864b_is_enabled(void);
+
+#endif /* _CFAG12864B_H_ */
+
diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h
new file mode 100644
index 0000000..aca57f1
--- /dev/null
+++ b/include/linux/ks0108.h
@@ -0,0 +1,46 @@
+/*
+ *    Filename: ks0108.h
+ *     Version: 0.1.0
+ * Description: ks0108 LCD Controller driver header
+ *     License: GPLv2
+ *
+ *      Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ *        Date: 2006-12-06
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _KS0108_H_
+#define _KS0108_H_
+
+/* Write a byte to the data port */
+extern void ks0108_writedata(unsigned char byte);
+
+/* Write a byte to the control port */
+extern void ks0108_writecontrol(unsigned char byte);
+
+/* Set the controller's current display state (0..1) */
+extern void ks0108_displaystate(unsigned char state);
+
+/* Set the controller's current startline (0..63) */
+extern void ks0108_startline(unsigned char startline);
+
+/* Set the controller's current address (0..63) */
+extern void ks0108_address(unsigned char address);
+
+/* Set the controller's current page (0..7) */
+extern void ks0108_page(unsigned char page);
+
+#endif /* _KS0108_H_ */

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* ACPI output/lcd/auxdisplay mess
@ 2006-11-14 19:41 James Simmons
  2006-11-14 22:26 ` Miguel Ojeda
  0 siblings, 1 reply; 18+ messages in thread
From: James Simmons @ 2006-11-14 19:41 UTC (permalink / raw)
  To: Linux Kernel Mailing List
  Cc: Linux Fbdev development list, Miguel Ojeda Sandonis, Luming Yu,
	Andrew Zabolotny, Jamey Hicks


I have noticed a bunch of patches coming in dealing with the same problem. How to handle displays 
i.e LCD, CRT etc. We have a lcd class in video/backlight which no one is using. Because no one was
aware of it auxdisplay was created instead. Then we have the acpi code which wants a output class
to handle powering down the display device. Plus the acpi layer does something very similar to the
framebuffer with getting edids and data relating to the display device. We really should place all
this handling in one standard place. To do this I need to know what all of you require.

^ permalink raw reply	[flat|nested] 18+ messages in thread
end of thread, other threads:[~2007-01-14  8:05 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-06 18:44 Display class Miguel Ojeda Sandonis
2006-12-06 19:06 ` Miguel Ojeda
2006-12-07 15:20 ` James Simmons
2006-12-07 16:21   ` Miguel Ojeda
2006-12-08 11:58   ` Miguel Ojeda
  -- strict thread matches above, loose matches on Subject: below --
2006-11-14 19:41 ACPI output/lcd/auxdisplay mess James Simmons
2006-11-14 22:26 ` Miguel Ojeda
2006-11-15  0:54   ` James Simmons
2006-12-05 18:03     ` Display class James Simmons
2006-12-06  1:14       ` Randy Dunlap
2006-12-06 15:10         ` James Simmons
2006-12-06 18:14           ` Randy Dunlap
2006-12-06 18:24             ` James Simmons
2006-12-06 18:57               ` Randy Dunlap
2006-12-06 19:13                 ` James Simmons
2006-12-06 20:28           ` Randy Dunlap
2006-12-06 13:19       ` Miguel Ojeda
2006-12-30  3:32       ` Dmitry Torokhov
2007-01-13 22:40         ` James Simmons
2007-01-14  7:54           ` Greg KH
2007-01-14  7:55           ` Greg KH

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox