From: Russell King <rmk+lkml@arm.linux.org.uk>
To: Linux Kernel List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@osdl.org>, Linus Torvalds <torvalds@osdl.org>
Subject: Re: [PATCH] Add support for Korenix 16C950-based PCI cards
Date: Wed, 20 Dec 2006 19:05:57 +0000 [thread overview]
Message-ID: <20061220190557.GA13129@flint.arm.linux.org.uk> (raw)
In-Reply-To: <20061220133310.GA28555@pazke.donpac.ru>
On Wed, Dec 20, 2006 at 04:33:10PM +0300, Andrey Panin wrote:
> On 347, 12 13, 2006 at 02:45:46PM +0000, Russell King wrote:
> > Linus, Andrew,
> >
> > This patch adds initial support to 8250-pci for the Korenix Jetcard PCI
> > serial cards. The JC12xx cards are standard RS232-based serial cards
> > utilising the Oxford 16C950 device.
> >
> > The JC14xx are RS422/RS485-based cards, but in order for these to be
> > supported natively, we will need additional tweaks to the 8250 layers
> > so we can specify some values for the 950's registers. Hence, these
> > two entries are commented out.
>
> IIRC 16c950 just need two bits in ACR set properly. Will attached patch
> do the trick ?
I, too, also have a patch which does something similar. I'm going to
hold off on that until post 2.6.20 though, especially as I have no
way to test it.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of:
prev parent reply other threads:[~2006-12-20 19:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-13 14:45 [PATCH] Add support for Korenix 16C950-based PCI cards Russell King
2006-12-20 13:33 ` Andrey Panin
2006-12-20 19:05 ` Russell King [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061220190557.GA13129@flint.arm.linux.org.uk \
--to=rmk+lkml@arm.linux.org.uk \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox