Re: [Alsa-devel] sound/isa/cmi8330.c: dead ENABLE_SB_MIXER code

[Ondrej Zary <linux@rainbow-software.org>]

On Tuesday 19 December 2006 10:59, you wrote:
> At Mon, 4 Dec 2006 17:04:34 +0100,
>
> Adrian Bunk wrote:
> > In sound/isa/cmi8330.c, the ENABLE_SB_MIXER code is currently never
> > used.
> >
> > What's the story behind this?
> > Should ENABLE_SB_MIXER be enabled?
> > Or the code be removed?
>
> CMI8330 has a dual interface for SB and Adlib modes.  The mixer can
> also behave differently according to the mode.  The current code has
> mixer elements corresponding to both modes.

CMI8330 (and also CMI8329) appears like SB16 and WSS

> However, these mixer elements _seem_ to interactive with each other,
> and cannot be controlled individually.  That's why ENABLE_SB_MIXER is
> disabled.  I cannot check this issue any longer since the test board
> got broken long time ago...

The mixer is a bit weird - and probably different between CMI8329 and CMI8330. 
At least on my CMI8329A, the master volume does not work. And there are also 
some problems with PCM volume - I can decrease it in alsamixer but not 
increase - but it works both ways in XMMS...
I have also some boards with integrated CMI8330 - so I might test it 
sometimes.

> I don't think we would get many gain by changing this old code.
> (and the relevant part isn't so big.)
> Let's keep as it is.
>
>
> Takashi
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
Ondrej Zary