From: Frederik Deweerdt <deweerdt@free.fr>
To: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, drzeus@drzeus.cx
Subject: Re: 2.6.20-rc4-mm1
Date: Fri, 12 Jan 2007 13:18:00 +0000 [thread overview]
Message-ID: <20070112131800.GE5941@slug> (raw)
In-Reply-To: <200701121125.58794.m.kozlowski@tuxland.pl>
On Fri, Jan 12, 2007 at 11:25:58AM +0100, Mariusz Kozlowski wrote:
> Hello,
>
> Doesn't build on my laptop.
>
> drivers/mmc/mmc.c: In function 'mmc_lock_unlock':
> drivers/mmc/mmc.c:1527: error: dereferencing pointer to incomplete type
> drivers/mmc/mmc.c:1527: warning: type defaults to 'int' in declaration of '_________p1'
> drivers/mmc/mmc.c:1527: error: dereferencing pointer to incomplete type
> drivers/mmc/mmc.c:1527: warning: assignment makes pointer from integer without a cast
> make[2]: *** [drivers/mmc/mmc.o] Error 1
> make[1]: *** [drivers/mmc] Error 2
> make: *** [drivers] Error 2
>
Hi,
That's because mmc_lock_unlock should depend on CONFIG_KEYS, it uses struct key.
Could you try the following patch (compile tested)?
Regards,
Frederik
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 3956023..c1fe01d 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1503,6 +1503,8 @@ static void mmc_setup(struct mmc_host *h
mmc_process_ext_csds(host);
}
+#ifdef CONFIG_MMC_PASSWORDS
+
/**
* mmc_lock_unlock - send LOCK_UNLOCK command to a specific card.
* @card: card to which the LOCK_UNLOCK command should be sent
@@ -1617,6 +1619,8 @@ out:
return err;
}
+#endif /* CONFIG_MMC_PASSWORDS */
+
/**
* mmc_detect_change - process change of state on a MMC socket
* @host: host which changed state.
next prev parent reply other threads:[~2007-01-12 13:20 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-12 6:26 2.6.20-rc4-mm1 Andrew Morton
2007-01-12 10:20 ` Early ACPI lockup (was Re: 2.6.20-rc4-mm1) Frederik Deweerdt
2007-01-12 22:53 ` Len Brown
2007-01-12 23:10 ` Frederik Deweerdt
2007-01-12 23:36 ` Jiri Slaby
2007-01-13 0:08 ` Michal Piotrowski
2007-01-13 0:45 ` Frederik Deweerdt
2007-01-13 0:43 ` Jiri Slaby
2007-01-12 10:25 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 13:18 ` Frederik Deweerdt [this message]
2007-01-12 15:13 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 15:16 ` 2.6.20-rc4-mm1 Michal Piotrowski
2007-01-12 16:12 ` 2.6.20-rc4-mm1 Mariusz Kozlowski
2007-01-12 10:52 ` 'struct task_struct' has no member named 'mems_allowed' (was: Re: 2.6.20-rc4-mm1) Sander
2007-01-12 11:28 ` Paul Jackson
2007-01-12 19:25 ` Christoph Lameter
2007-01-12 21:20 ` Paul Jackson
2007-01-12 21:28 ` Christoph Lameter
2007-01-12 21:58 ` Paul Jackson
2007-01-12 22:00 ` Christoph Lameter
2007-01-12 22:10 ` Paul Jackson
2007-01-12 22:11 ` Andrew Morton
2007-01-12 11:55 ` spurious sparse warnings from linux/aio.h (was: 2.6.20-rc4-mm1) Tilman Schmidt
2007-01-12 13:11 ` Suparna Bhattacharya
2007-01-12 17:46 ` spurious sparse warnings from linux/aio.h Tilman Schmidt
2007-01-12 13:33 ` [-mm patch] remove tcp header from tcp_v4_check Frederik Deweerdt
2007-01-12 13:55 ` [-mm patch] remove tcp header from tcp_v4_check (take #2) Frederik Deweerdt
2007-02-05 0:44 ` David Miller
2007-01-13 7:27 ` 2.6.20-rc4-mm1: status of sn9c102_pas202bca? Adrian Bunk
2007-01-15 11:34 ` Mauro Carvalho Chehab
2007-01-13 9:56 ` [-mm patch] make mmc_sysfs.c:mmc_key_type static Adrian Bunk
2007-01-13 22:38 ` Pierre Ossman
2007-01-13 9:56 ` [-mm patch] make gfs2_change_nlink_i() static Adrian Bunk
2007-01-15 10:31 ` Steven Whitehouse
2007-01-16 21:04 ` [Cluster-devel] " Wendy Cheng
2007-01-16 21:29 ` Adrian Bunk
2007-01-14 9:10 ` 2.6.20-rc4-mm1: different values for OHCI_QUIRK_ZFMICRO Adrian Bunk
2007-01-14 14:36 ` David Brownell
2007-02-20 0:06 ` Adrian Bunk
2007-03-29 22:06 ` Randy Dunlap
2007-03-29 22:24 ` David Brownell
2007-05-08 22:17 ` [PATCH] " Randy Dunlap
2007-05-08 22:34 ` David Brownell
2007-05-08 22:37 ` Greg KH
2007-03-30 15:18 ` 2.6.20-rc4-mm1: " Tony Olech
2007-01-14 9:48 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 10:46 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 14:40 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 22:05 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 22:31 ` 2.6.20-rc4-mm1 Thomas Gleixner
2007-01-14 22:30 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-15 8:22 ` 2.6.20-rc4-mm1 Ingo Molnar
2007-01-15 23:55 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 22:20 ` 2.6.20-rc4-mm1 Jens Axboe
2007-01-14 23:52 ` i810fb fails to load (was: 2.6.20-rc4-mm1) Tilman Schmidt
2007-01-15 0:22 ` Andrew Morton
2007-01-22 13:42 ` i810fb fails to load Thomas Hellström
2007-01-22 18:30 ` Tilman Schmidt
2007-01-22 21:50 ` Dave Airlie
2007-01-23 8:10 ` Thomas Hellström
2007-01-18 21:55 ` [-mm patch] fs/unionfs/: possible cleanups Adrian Bunk
2007-01-20 22:06 ` Josef Sipek
2007-01-19 18:40 ` [-mm patch] drivers/mtd/ubi/: " Adrian Bunk
2007-01-21 11:23 ` Artem Bityutskiy
2007-01-20 22:38 ` [-mm patch] oops in drivers/net/shaper.c Frederik Deweerdt
2007-01-21 19:13 ` [-mm patch] remove one remaining "#define BCM_TSO 1" Adrian Bunk
2007-01-22 18:17 ` [-mm patch] drivers/firewire/: cleanups Adrian Bunk
2007-01-22 19:41 ` Kristian Høgsberg
2007-01-22 20:04 ` Adrian Bunk
2007-01-22 20:04 ` Kristian Høgsberg
2007-01-22 20:44 ` Stefan Richter
2007-01-23 6:02 ` `make htmldocs` fails Don Mullis
2007-01-23 6:22 ` Randy Dunlap
2007-01-23 6:45 ` `make htmldocs` fails -- 2.6.20-rc4-mm1 Don Mullis
2007-01-23 6:35 ` `make htmldocs` fails Greg KH
2007-01-24 13:53 ` 2.6.20-rc4-mm1: PCI=n: drivers/net/3c59x.c compile error Adrian Bunk
2007-01-24 14:12 ` Sergei Shtylyov
2007-02-17 19:26 ` Sergei Shtylyov
2007-02-17 19:32 ` Sergei Shtylyov
2007-02-26 13:22 ` Sergei Shtylyov
2007-02-26 17:26 ` Randy Dunlap
2007-02-26 21:14 ` Greg KH
2007-03-06 16:15 ` Sergei Shtylyov
2007-03-06 16:47 ` Randy Dunlap
2007-03-09 12:54 ` Tejun Heo
2007-01-24 22:36 ` [-mm patch] MTD_CK804XROM must depend on PCI Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070112131800.GE5941@slug \
--to=deweerdt@free.fr \
--cc=akpm@osdl.org \
--cc=drzeus@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=m.kozlowski@tuxland.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox