* Re: SATA exceptions triggered by XFS (since 2.6.18)
2007-01-21 14:29 SATA exceptions triggered by XFS (since 2.6.18) Paolo Ornati
@ 2007-01-21 16:40 ` Paolo Ornati
2007-01-21 17:32 ` Robert Hancock
0 siblings, 1 reply; 12+ messages in thread
From: Paolo Ornati @ 2007-01-21 16:40 UTC (permalink / raw)
To: Paolo Ornati
Cc: Linux Kernel Mailing List, Robert Hancock, Björn Steinbrink,
Jens Axboe, Jeff Garzik, Tejun Heo
[-- Attachment #1: Type: text/plain, Size: 5742 bytes --]
On Sun, 21 Jan 2007 15:29:32 +0100
Paolo Ornati <ornati@fastwebnet.it> wrote:
> Sorry for starting a new thread, but I've deleted the messages from my
> mail-box, and I'm sot sure it's the same problem as here:
> http://lkml.org/lkml/2007/1/14/108
>
> Today I've decided to try XFS... and just doing anything on it
> (extracting a tarball, for example) make my SATA HD go crazy ;)
>
> I don't remember to have seen this using Ext3.
>
> [ 877.839920] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action
> 0x2 frozen [ 877.839929] ata1.00: cmd
> 61/02:00:64:98:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 1024 out
> [ 877.839931] res 40/00:00:00:4f:c2/00:00:00:4f:c2/00 Emask
> 0x4 (timeout) [ 878.142367] ata1: soft resetting port [ 878.351791]
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 878.354384]
> ata1.00: configured for UDMA/133 [ 878.354392] ata1: EH complete
> [ 878.355696] SCSI device sda: 156301488 512-byte hdwr sectors
> (80026 MB) [ 878.355716] sda: Write Protect is off
> [ 878.355718] sda: Mode Sense: 00 3a 00 00
> [ 878.355745] SCSI device sda: write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
>
>
> It takes nothing to reproduce it.
>
> My hardware is:
>
> 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller
> Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation
> 82G965 Integrated Graphics Controller (rev 02) 00:03.0 Communication
> controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
> 00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit
> Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation
> 82801H (ICH8 Family) USB UHCI #4 (rev 02) 00:1a.1 USB Controller:
> Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02) 00:1a.7
> USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2
> (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family)
> HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation
> 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge:
> Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
> 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H
> (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel
> Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0
> USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1
> (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8
> Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel
> Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02) 00:1d.7 USB
> Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev
> 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
> 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC
> Interface Controller (rev 02) 00:1f.2 SATA controller: Intel
> Corporation 82801HB (ICH8) 4 port SATA AHCI Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus
> Controller (rev 02) 02:00.0 IDE interface: Marvell Technology Group
> Ltd. Unknown device 6101 (rev b1) 06:00.0 Ethernet controller:
> Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>
>
> with a Seagate Barracurda 7200rpm 80GB HD
>
>
> I've so far tested these kernels:
> 2.6.20-rc5 BAD
> 2.6.20-rc4 BAD
> 2.6.19 BAD
> 2.6.18 BAD
> 2.6.17 Good !
>
> I'll start a git-bisection...
>
git-bisect points to this commit:
----------------------------------------------
12fad3f965830d71f6454f02b2af002a64cec4d3 is first bad commit
commit 12fad3f965830d71f6454f02b2af002a64cec4d3
Author: Tejun Heo <htejun@gmail.com>
Date: Mon May 15 21:03:55 2006 +0900
[PATCH] ahci: implement NCQ suppport
Implement NCQ support.
Original implementation is from Jens Axboe.
Signed-off-by: Tejun Heo <htejun@gmail.com>
:040000 040000 be681c4b21f34da5241e72c97c6695d735e90771
3557b2db9d7c3d48a0408137b455ce12931bb18d M drivers
----------------------------------------------
Problem just reproduced on 2.6.20-rc5:
[ 431.374421] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[ 431.374430] ata1.00: cmd 61/40:00:fe:aa:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[ 431.374432] res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[ 431.677154] ata1: soft resetting port
[ 431.886700] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 431.889277] ata1.00: configured for UDMA/133
[ 431.889285] ata1: EH complete
[ 431.890781] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 431.890854] sda: Write Protect is off
[ 431.890858] sda: Mode Sense: 00 3a 00 00
[ 431.890903] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 450.800490] XFS mounting filesystem sda1
[ 450.853731] Ending clean XFS mount for filesystem: sda1
[ 481.131888] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[ 481.131896] ata1.00: cmd 61/40:00:46:af:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[ 481.131898] res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[ 481.436015] ata1: soft resetting port
[ 481.645237] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 481.647825] ata1.00: configured for UDMA/133
[ 481.647834] ata1: EH complete
[ 481.649252] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 481.649295] sda: Write Protect is off
[ 481.649298] sda: Mode Sense: 00 3a 00 00
[ 481.649358] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Full dmesg attached.
If you need more info, just ask.
--
Paolo Ornati
Linux 2.6.20-rc5 on x86_64
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 27530 bytes --]
[ 0.000000] Linux version 2.6.20-rc5 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #12 SMP Sun Jan 21 13:31:25 CET 2007
[ 0.000000] Command line: root=/dev/sda6 vga=0x305
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e599000 (usable)
[ 0.000000] BIOS-e820: 000000003e599000 - 000000003e5a6000 (reserved)
[ 0.000000] BIOS-e820: 000000003e5a6000 - 000000003e655000 (usable)
[ 0.000000] BIOS-e820: 000000003e655000 - 000000003e6a6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6a6000 - 000000003e6ab000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ab000 - 000000003e6ac000 (usable)
[ 0.000000] BIOS-e820: 000000003e6ac000 - 000000003e6f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6f2000 - 000000003e6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
[ 0.000000] BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL DG965SS 0x00000629 0x01000013) @ 0x000000003e6fd038
[ 0.000000] ACPI: FADT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6fc000
[ 0.000000] ACPI: MADT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f6000
[ 0.000000] ACPI: WDDT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f5000
[ 0.000000] ACPI: MCFG (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f4000
[ 0.000000] ACPI: ASF! (v032 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f3000
[ 0.000000] ACPI: HPET (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f2000
[ 0.000000] ACPI: SSDT (v001 INTEL CpuPm 0x00000629 MSFT 0x01000013) @ 0x000000003e6aa000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a9000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a8000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a7000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a6000
[ 0.000000] ACPI: DSDT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x0000000000000000
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0 -> 143
[ 0.000000] 0: 256 -> 255385
[ 0.000000] 0: 255398 -> 255573
[ 0.000000] 0: 255659 -> 255660
[ 0.000000] 0: 255743 -> 255744
[ 0.000000] On node 0 totalpages: 255449
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1286 pages reserved
[ 0.000000] DMA zone: 2641 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3440 pages used for memmap
[ 0.000000] DMA32 zone: 248026 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000008f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Nosave address range: 000000003e599000 - 000000003e5a6000
[ 0.000000] Nosave address range: 000000003e655000 - 000000003e6a6000
[ 0.000000] Nosave address range: 000000003e6a6000 - 000000003e6ab000
[ 0.000000] Nosave address range: 000000003e6ac000 - 000000003e6f2000
[ 0.000000] Nosave address range: 000000003e6f2000 - 000000003e6ff000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:c0f00000)
[ 0.000000] PERCPU: Allocating 32576 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 250667
[ 0.000000] Kernel command line: root=/dev/sda6 vga=0x305
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 30.622927] Console: colour dummy device 80x25
[ 30.623426] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 30.623788] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 30.623872] Checking aperture...
[ 30.633592] Memory: 998312k/1022976k available (2871k kernel code, 22812k reserved, 1529k data, 232k init)
[ 30.693254] Calibrating delay using timer specific routine.. 3732.21 BogoMIPS (lpj=1866108)
[ 30.693304] Mount-cache hash table entries: 256
[ 30.693409] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.693414] CPU: L2 cache: 2048K
[ 30.693417] using mwait in idle threads.
[ 30.693421] CPU: Physical Processor ID: 0
[ 30.693423] CPU: Processor Core ID: 0
[ 30.693430] CPU0: Thermal monitoring enabled (TM2)
[ 30.693444] Freeing SMP alternatives: 28k freed
[ 30.693461] ACPI: Core revision 20060707
[ 30.708480] Using local APIC timer interrupts.
[ 30.762098] result 16650020
[ 30.762101] Detected 16.650 MHz APIC timer.
[ 30.762330] Booting processor 1/2 APIC 0x1
[ 30.772913] Initializing CPU#1
[ 30.833217] Calibrating delay using timer specific routine.. 3729.62 BogoMIPS (lpj=1864812)
[ 30.833224] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.833226] CPU: L2 cache: 2048K
[ 30.833229] CPU: Physical Processor ID: 0
[ 30.833230] CPU: Processor Core ID: 1
[ 30.833236] CPU1: Thermal monitoring enabled (TM2)
[ 30.833533] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 30.834228] Brought up 2 CPUs
[ 30.834277] testing NMI watchdog ... OK.
[ 30.844290] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
[ 30.844294] time.c: Detected 1864.803 MHz processor.
[ 30.898517] migration_cost=22
[ 30.898779] NET: Registered protocol family 16
[ 30.898854] ACPI: bus type pci registered
[ 30.898861] PCI: Using configuration type 1
[ 30.903472] ACPI: Interpreter enabled
[ 30.903477] ACPI: Using IOAPIC for interrupt routing
[ 30.903872] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.903878] PCI: Probing PCI hardware (bus 00)
[ 30.903895] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 30.905108] Boot video device is 0000:00:02.0
[ 30.905728] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 30.905734] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 30.906325] PCI: Transparent bridge - 0000:00:1e.0
[ 30.906390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 30.912015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 30.912793] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 30.913029] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 30.913271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 30.913501] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 30.913738] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 30.913969] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 30.914204] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 30.914436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 30.916002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 30.916265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 30.916519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 30.916773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 30.917026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 30.918512] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 30.918521] pnp: PnP ACPI init
[ 30.921536] pnp: PnP ACPI: found 13 devices
[ 30.921672] SCSI subsystem initialized
[ 30.921709] libata version 2.00 loaded.
[ 30.921756] usbcore: registered new interface driver usbfs
[ 30.921787] usbcore: registered new interface driver hub
[ 30.921824] usbcore: registered new device driver usb
[ 30.921886] PCI: Using ACPI for IRQ routing
[ 30.921890] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 30.921974] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 30.921981] hpet0: 3 64-bit timers, 14318180 Hz
[ 30.923000] PCI-GART: No AMD northbridge found.
[ 30.923060] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 30.923065] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[ 30.923069] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 30.923339] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 30.923345] PCI: Bridge: 0000:00:1c.0
[ 30.923348] IO window: disabled.
[ 30.923353] MEM window: 50400000-504fffff
[ 30.923358] PREFETCH window: disabled.
[ 30.923363] PCI: Bridge: 0000:00:1c.1
[ 30.923367] IO window: 2000-2fff
[ 30.923372] MEM window: 50100000-501fffff
[ 30.923376] PREFETCH window: disabled.
[ 30.923381] PCI: Bridge: 0000:00:1c.2
[ 30.923384] IO window: disabled.
[ 30.923389] MEM window: 50500000-505fffff
[ 30.923393] PREFETCH window: disabled.
[ 30.923399] PCI: Bridge: 0000:00:1c.3
[ 30.923401] IO window: disabled.
[ 30.923406] MEM window: 50600000-506fffff
[ 30.923411] PREFETCH window: disabled.
[ 30.923416] PCI: Bridge: 0000:00:1c.4
[ 30.923418] IO window: disabled.
[ 30.923424] MEM window: 50700000-507fffff
[ 30.923428] PREFETCH window: disabled.
[ 30.923433] PCI: Bridge: 0000:00:1e.0
[ 30.923437] IO window: 1000-1fff
[ 30.923442] MEM window: 50000000-500fffff
[ 30.923446] PREFETCH window: disabled.
[ 30.923467] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 30.923475] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 30.923490] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 30.923496] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 30.923511] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 30.923518] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 30.923533] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 30.923539] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 30.923553] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 30.923560] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 30.923569] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 30.923592] NET: Registered protocol family 2
[ 30.936495] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 30.936626] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 30.937429] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 30.938075] TCP: Hash tables configured (established 131072 bind 65536)
[ 30.938079] TCP reno registered
[ 30.941694] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
[ 30.943818] Freeing initrd memory: 2000k freed
[ 30.944858] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 30.945458] fuse init (API version 7.8)
[ 30.945511] SGI XFS with large block/inode numbers, no debug enabled
[ 30.945676] io scheduler noop registered
[ 30.945689] io scheduler cfq registered (default)
[ 30.946204] vesafb: framebuffer at 0x40000000, mapped to 0xffffc20000080000, using 1536k, total 7616k
[ 30.946210] vesafb: mode is 1024x768x8, linelength=1024, pages=8
[ 30.946214] vesafb: scrolling: redraw
[ 30.946217] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 30.954761] Console: switching to colour frame buffer device 128x48
[ 30.963319] fb0: VESA VGA frame buffer device
[ 30.963456] input: Power Button (FF) as /class/input/input0
[ 30.963546] ACPI: Power Button (FF) [PWRF]
[ 30.963660] input: Sleep Button (CM) as /class/input/input1
[ 30.963753] ACPI: Sleep Button (CM) [SLPB]
[ 30.964061] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 30.964230] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 30.966361] Real Time Clock Driver v1.12ac
[ 30.966471] hpet_resources: 0xfed00000 is busy
[ 30.966490] Linux agpgart interface v0.101 (c) Dave Jones
[ 30.966636] agpgart: Detected an Intel 965G Chipset.
[ 30.967245] agpgart: Unknown page table size, assuming 512KB
[ 30.967343] agpgart: Detected 7676K stolen memory.
[ 30.979835] agpgart: AGP aperture is 256M @ 0x40000000
[ 30.979956] [drm] Initialized drm 1.1.0 20060810
[ 30.980047] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.980221] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 30.980313] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 30.980544] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.982444] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.984136] Floppy drive(s): fd0 is 1.44M
[ 30.999821] FDC 0 is a National Semiconductor PC87306
[ 31.002866] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 31.004881] loop: loaded (max 8 devices)
[ 31.006710] Intel(R) PRO/10GbE Network Driver - version 1.0.126-k2
[ 31.008648] Copyright (c) 1999-2006 Intel Corporation.
[ 31.010866] 8139too Fast Ethernet driver 0.9.28
[ 31.012935] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 31.015439] eth0: RealTek RTL8139 at 0xffffc2000000e000, 00:e0:4c:f0:a9:84, IRQ 21
[ 31.017719] eth0: Identified 8139 chip type 'RTL-8139C'
[ 31.017724] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.020080] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 31.022624] Probing IDE interface ide0...
[ 31.536077] Probing IDE interface ide1...
[ 32.049444] ahci 0000:00:1f.2: version 2.0
[ 32.049457] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 33.053438] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 33.053445] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 33.056162] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 33.058971] ata1: SATA max UDMA/133 cmd 0xFFFFC20000024100 ctl 0x0 bmdma 0x0 irq 19
[ 33.061879] ata2: SATA max UDMA/133 cmd 0xFFFFC20000024180 ctl 0x0 bmdma 0x0 irq 19
[ 33.064763] ata3: DUMMY
[ 33.067649] ata4: DUMMY
[ 33.070574] ata5: SATA max UDMA/133 cmd 0xFFFFC20000024300 ctl 0x0 bmdma 0x0 irq 19
[ 33.073666] ata6: SATA max UDMA/133 cmd 0xFFFFC20000024380 ctl 0x0 bmdma 0x0 irq 19
[ 33.076718] scsi0 : ahci
[ 33.537612] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.541952] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
[ 33.546612] ata1.00: configured for UDMA/133
[ 33.549812] scsi1 : ahci
[ 33.856779] ata2: SATA link down (SStatus 0 SControl 300)
[ 33.859895] scsi2 : ahci
[ 33.863049] scsi3 : ahci
[ 33.866148] scsi4 : ahci
[ 34.171860] ata5: SATA link down (SStatus 0 SControl 300)
[ 34.174931] scsi5 : ahci
[ 34.480952] ata6: SATA link down (SStatus 0 SControl 300)
[ 34.484083] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 34.487315] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 34.490502] sda: Write Protect is off
[ 34.493660] sda: Mode Sense: 00 3a 00 00
[ 34.493675] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.497010] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 34.500315] sda: Write Protect is off
[ 34.503558] sda: Mode Sense: 00 3a 00 00
[ 34.503573] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.506920] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 34.570981] sd 0:0:0:0: Attached scsi disk sda
[ 34.574292] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 34.577577] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.580884] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 34.580903] ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2026 bmdma 0x2000 irq 17
[ 34.584160] scsi6 : pata_marvell
[ 34.587447] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 34.754096] ATA: abnormal status 0x8 on port 0x201F
[ 34.769209] ATA: abnormal status 0x8 on port 0x201F
[ 34.943029] ata7.01: ATAPI, max UDMA/33
[ 35.117489] ata7.01: configured for UDMA/33
[ 35.124371] scsi 6:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 35.146129] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 35.149422] Uniform CD-ROM driver Revision: 3.20
[ 35.152680] sr 6:0:1:0: Attached scsi CD-ROM sr0
[ 35.152733] sr 6:0:1:0: Attached scsi generic sg1 type 5
[ 35.155964] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.159175] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 35.159179] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 35.162397] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 35.165598] ehci_hcd 0000:00:1a.7: debug port 1
[ 35.168784] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 35.168791] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50325c00
[ 35.175808] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.179141] usb usb1: configuration #1 chosen from 1 choice
[ 35.182385] hub 1-0:1.0: USB hub found
[ 35.185625] hub 1-0:1.0: 4 ports detected
[ 35.289849] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.293120] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 35.293123] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 35.296363] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 35.299612] ehci_hcd 0000:00:1d.7: debug port 1
[ 35.302811] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 35.302818] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50325800
[ 35.309902] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.313202] usb usb2: configuration #1 chosen from 1 choice
[ 35.316505] hub 2-0:1.0: USB hub found
[ 35.319802] hub 2-0:1.0: 6 ports detected
[ 35.423852] USB Universal Host Controller Interface driver v3.0
[ 35.427206] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.430572] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 35.430575] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 35.433925] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 35.437262] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
[ 35.440634] usb usb3: configuration #1 chosen from 1 choice
[ 35.443886] hub 3-0:1.0: USB hub found
[ 35.447056] hub 3-0:1.0: 2 ports detected
[ 35.551901] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 35.555078] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 35.555081] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 35.558204] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 35.561364] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[ 35.564605] usb usb4: configuration #1 chosen from 1 choice
[ 35.567757] hub 4-0:1.0: USB hub found
[ 35.570823] hub 4-0:1.0: 2 ports detected
[ 35.674942] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.677998] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 35.678001] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.680990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 35.684056] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 35.687166] usb usb5: configuration #1 chosen from 1 choice
[ 35.690247] hub 5-0:1.0: USB hub found
[ 35.693235] hub 5-0:1.0: 2 ports detected
[ 35.797979] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 35.800971] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.800974] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.803973] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 35.806959] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 35.809972] usb usb6: configuration #1 chosen from 1 choice
[ 35.812916] hub 6-0:1.0: USB hub found
[ 35.815806] hub 6-0:1.0: 2 ports detected
[ 35.920021] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.922994] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 35.922997] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.925960] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 35.928932] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 35.931994] usb usb7: configuration #1 chosen from 1 choice
[ 35.934965] hub 7-0:1.0: USB hub found
[ 35.937844] hub 7-0:1.0: 2 ports detected
[ 36.042093] usbcore: registered new interface driver cdc_acm
[ 36.044991] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 36.048065] usbcore: registered new interface driver usblp
[ 36.051105] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 36.054174] Initializing USB Mass Storage driver...
[ 36.057250] usbcore: registered new interface driver usb-storage
[ 36.060363] USB Mass Storage support registered.
[ 36.063533] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 36.069536] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 36.072646] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 36.075753] mice: PS/2 mouse device common for all mice
[ 36.078970] i2c /dev entries driver
[ 36.082061] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 36.105452] EDAC MC: Ver: 2.0.1 Jan 21 2007
[ 36.108861] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
[ 36.112489] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 36.115735] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 36.236274] ALSA device list:
[ 36.239468] #0: HDA Intel at 0x50320000 irq 22
[ 36.242691] nf_conntrack version 0.5.0 (3996 buckets, 31968 max)
[ 36.246129] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.292245] TCP cubic registered
[ 36.295496] NET: Registered protocol family 1
[ 36.298716] NET: Registered protocol family 17
[ 36.301848] NET: Registered protocol family 15
[ 36.817332] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 36.844024] input: AT Translated Set 2 keyboard as /class/input/input3
[ 36.911624] RAMDISK: ext2 filesystem found at block 0
[ 36.914791] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\bdone.
[ 36.922467] VFS: Mounted root (ext2 filesystem).
[ 36.946396] kjournald starting. Commit interval 5 seconds
[ 36.946405] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.946440] VFS: Mounted root (ext3 filesystem) readonly.
[ 36.946442] Trying to move old root to /initrd ... /initrd does not exist. Ignored.
[ 36.946615] Unmounting old root
[ 36.946720] Trying to free ramdisk memory ... okay
[ 36.946984] Freeing unused kernel memory: 232k freed
[ 41.104813] EXT3 FS on sda6, internal journal
[ 41.550123] Adding 1004016k swap on /dev/sda7. Priority:-1 extents:1 across:1004016k
[ 62.630799] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 399.563221] XFS mounting filesystem sda1
[ 399.603500] Ending clean XFS mount for filesystem: sda1
[ 431.374421] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[ 431.374430] ata1.00: cmd 61/40:00:fe:aa:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[ 431.374432] res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[ 431.677154] ata1: soft resetting port
[ 431.886700] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 431.889277] ata1.00: configured for UDMA/133
[ 431.889285] ata1: EH complete
[ 431.890781] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 431.890854] sda: Write Protect is off
[ 431.890858] sda: Mode Sense: 00 3a 00 00
[ 431.890903] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 450.800490] XFS mounting filesystem sda1
[ 450.853731] Ending clean XFS mount for filesystem: sda1
[ 481.131888] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
[ 481.131896] ata1.00: cmd 61/40:00:46:af:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out
[ 481.131898] res 40/00:00:9e:9c:bd/00:00:01:00:00/40 Emask 0x4 (timeout)
[ 481.436015] ata1: soft resetting port
[ 481.645237] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 481.647825] ata1.00: configured for UDMA/133
[ 481.647834] ata1: EH complete
[ 481.649252] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 481.649295] sda: Write Protect is off
[ 481.649298] sda: Mode Sense: 00 3a 00 00
[ 481.649358] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[-- Attachment #3: interrupts.txt --]
[-- Type: text/plain, Size: 905 bytes --]
CPU0 CPU1
0: 617966 0 IO-APIC-edge timer
1: 2361 0 IO-APIC-edge i8042
6: 5 0 IO-APIC-edge floppy
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 28043 0 IO-APIC-edge i8042
16: 43984 0 IO-APIC-fasteoi uhci_hcd:usb3, i915@pci:0000:00:02.0
17: 6551 0 IO-APIC-fasteoi libata
18: 0 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
19: 9176 0 IO-APIC-fasteoi libata, uhci_hcd:usb6
21: 375 0 IO-APIC-fasteoi uhci_hcd:usb4, eth0
22: 192 0 IO-APIC-fasteoi HDA Intel
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
NMI: 170 85
LOC: 605529 605586
ERR: 0
[-- Attachment #4: lspci.txt --]
[-- Type: text/plain, Size: 1982 bytes --]
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82G965 Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
[-- Attachment #5: CONFIG --]
[-- Type: application/octet-stream, Size: 36697 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Sun Jan 21 13:29:59 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
CONFIG_IXGB=y
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# HID Devices
#
# CONFIG_HID is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
^ permalink raw reply [flat|nested] 12+ messages in thread