From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932634AbXBNV1V (ORCPT ); Wed, 14 Feb 2007 16:27:21 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932638AbXBNV1V (ORCPT ); Wed, 14 Feb 2007 16:27:21 -0500 Received: from mta5.adelphia.net ([68.168.78.187]:41017 "EHLO mta5.adelphia.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932634AbXBNV1U (ORCPT ); Wed, 14 Feb 2007 16:27:20 -0500 X-Greylist: delayed 1684 seconds by postgrey-1.27 at vger.kernel.org; Wed, 14 Feb 2007 16:27:20 EST Date: Wed, 14 Feb 2007 14:04:50 -0600 From: Corey Minyard To: Linux Kernel , Andrew Morton Cc: Patrick Schoeller Subject: [patch 2/4] ipmi: allow shared interrupts Message-ID: <20070214200450.GB5364@localdomain> Reply-To: minyard@acm.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The IPMI driver used enable_irq and disable_irq when it got into situations where it couldn't allocate memory; it did this to avoid having the interrupt just lock the machine when it couldn't get memory to perform the transaction to disable the interrupt. This patch modifies the driver to not use disable_irq and enable_irq. It instead sends the messages to the BMC to perform this operation. It also makes sure interrupts are cleanly disabled when the interface is shut down and cleans up some shutdown things that are no longer necessary. Signed-off-by: Corey Minyard Cc: Patrick Schoeller Index: linux-2.6.19/drivers/char/ipmi/ipmi_si_intf.c =================================================================== --- linux-2.6.19.orig/drivers/char/ipmi/ipmi_si_intf.c 2006-12-30 12:57:04.000000000 -0600 +++ linux-2.6.19/drivers/char/ipmi/ipmi_si_intf.c 2006-12-30 12:57:06.000000000 -0600 @@ -83,6 +83,12 @@ #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a short timeout */ +/* Bit for BMC global enables. */ +#define IPMI_BMC_RCV_MSG_INTR 0x01 +#define IPMI_BMC_EVT_MSG_INTR 0x02 +#define IPMI_BMC_EVT_MSG_BUFF 0x04 +#define IPMI_BMC_SYS_LOG 0x08 + enum si_intf_state { SI_NORMAL, SI_GETTING_FLAGS, @@ -91,7 +97,9 @@ SI_CLEARING_FLAGS_THEN_SET_IRQ, SI_GETTING_MESSAGES, SI_ENABLE_INTERRUPTS1, - SI_ENABLE_INTERRUPTS2 + SI_ENABLE_INTERRUPTS2, + SI_DISABLE_INTERRUPTS1, + SI_DISABLE_INTERRUPTS2 /* FIXME - add watchdog stuff. */ }; @@ -340,6 +348,17 @@ smi_info->si_state = SI_ENABLE_INTERRUPTS1; } +static void start_disable_irq(struct smi_info *smi_info) +{ + unsigned char msg[2]; + + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + smi_info->si_state = SI_DISABLE_INTERRUPTS1; +} + static void start_clear_flags(struct smi_info *smi_info) { unsigned char msg[3]; @@ -360,7 +379,7 @@ static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { - disable_irq_nosync(smi_info->irq); + start_disable_irq(smi_info); smi_info->interrupt_disabled = 1; } } @@ -368,7 +387,7 @@ static inline void enable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (smi_info->interrupt_disabled)) { - enable_irq(smi_info->irq); + start_enable_irq(smi_info); smi_info->interrupt_disabled = 0; } } @@ -590,7 +609,9 @@ } else { msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; - msg[2] = msg[3] | 1; /* enable msg queue int */ + msg[2] = (msg[3] | + IPMI_BMC_RCV_MSG_INTR | + IPMI_BMC_EVT_MSG_INTR); smi_info->handlers->start_transaction( smi_info->si_sm, msg, 3); smi_info->si_state = SI_ENABLE_INTERRUPTS2; @@ -612,6 +633,45 @@ smi_info->si_state = SI_NORMAL; break; } + + case SI_DISABLE_INTERRUPTS1: + { + unsigned char msg[4]; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Could not disable interrupts" + ", failed get.\n"); + smi_info->si_state = SI_NORMAL; + } else { + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = (msg[3] & + ~(IPMI_BMC_RCV_MSG_INTR | + IPMI_BMC_EVT_MSG_INTR)); + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 3); + smi_info->si_state = SI_DISABLE_INTERRUPTS2; + } + break; + } + + case SI_DISABLE_INTERRUPTS2: + { + unsigned char msg[4]; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Could not disable interrupts" + ", failed set.\n"); + } + smi_info->si_state = SI_NORMAL; + break; + } } } @@ -865,9 +925,6 @@ struct timeval t; #endif - if (atomic_read(&smi_info->stop_operation)) - return; - spin_lock_irqsave(&(smi_info->si_lock), flags); #ifdef DEBUG_TIMING do_gettimeofday(&t); @@ -923,15 +980,11 @@ smi_info->interrupts++; spin_unlock(&smi_info->count_lock); - if (atomic_read(&smi_info->stop_operation)) - goto out; - #ifdef DEBUG_TIMING do_gettimeofday(&t); printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); - out: spin_unlock_irqrestore(&(smi_info->si_lock), flags); return IRQ_HANDLED; } @@ -1118,7 +1171,7 @@ if (info->si_type == SI_BT) { rv = request_irq(info->irq, si_bt_irq_handler, - IRQF_DISABLED, + IRQF_SHARED | IRQF_DISABLED, DEVICE_NAME, info); if (!rv) @@ -1128,7 +1181,7 @@ } else rv = request_irq(info->irq, si_irq_handler, - IRQF_DISABLED, + IRQF_SHARED | IRQF_DISABLED, DEVICE_NAME, info); if (rv) { @@ -1708,15 +1761,11 @@ smi_info->interrupts++; spin_unlock(&smi_info->count_lock); - if (atomic_read(&smi_info->stop_operation)) - goto out; - #ifdef DEBUG_TIMING do_gettimeofday(&t); printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); - out: spin_unlock_irqrestore(&(smi_info->si_lock), flags); return ACPI_INTERRUPT_HANDLED; @@ -2929,28 +2978,33 @@ list_del(&to_clean->link); - /* Tell the timer and interrupt handlers that we are shutting - down. */ - spin_lock_irqsave(&(to_clean->si_lock), flags); - spin_lock(&(to_clean->msg_lock)); - + /* Tell the driver that we are shutting down. */ atomic_inc(&to_clean->stop_operation); - if (to_clean->irq_cleanup) - to_clean->irq_cleanup(to_clean); - - spin_unlock(&(to_clean->msg_lock)); - spin_unlock_irqrestore(&(to_clean->si_lock), flags); - - /* Wait until we know that we are out of any interrupt - handlers might have been running before we freed the - interrupt. */ - synchronize_sched(); - + /* Make sure the timer and thread are stopped and will not run + again. */ wait_for_timer_and_thread(to_clean); - /* Interrupts and timeouts are stopped, now make sure the - interface is in a clean state. */ + /* Timeouts are stopped, now make sure the interrupts are off + for the device. A little tricky with locks to make sure + there are no races. */ + spin_lock_irqsave(&to_clean->si_lock, flags); + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { + spin_unlock_irqrestore(&to_clean->si_lock, flags); + poll(to_clean); + schedule_timeout_uninterruptible(1); + spin_lock_irqsave(&to_clean->si_lock, flags); + } + disable_si_irq(to_clean); + spin_unlock_irqrestore(&to_clean->si_lock, flags); + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { + poll(to_clean); + schedule_timeout_uninterruptible(1); + } + + /* Clean up interrupts and make sure that everything is done. */ + if (to_clean->irq_cleanup) + to_clean->irq_cleanup(to_clean); while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1);