* [PATCH] INPUT/keyboard: PXA27x keyboard support
[not found] ` <20070222224701.GB6179@enneenne.com>
@ 2007-03-02 16:05 ` Rodolfo Giometti
2007-03-07 5:35 ` Dmitry Torokhov
0 siblings, 1 reply; 2+ messages in thread
From: Rodolfo Giometti @ 2007-03-02 16:05 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: linux-input, linux-kernel, linux-arm-kernel, Nicolas Pitre
[-- Attachment #1: Type: text/plain, Size: 1797 bytes --]
Hello, here my last patch for the PXA27x keyboard support updated to
linux-2.6.21-rc2.
I added power management support (suspend/resume code).
Machines should call the driver with the following code:
static struct pxa27x_keyboard_platform_data wwpc1100_kbd = {
.nr_rows = 4,
.nr_cols = 4,
.keycodes = {
{
/* row 0 */
KEY_ESC,
KEY_ENTER,
KEY_F1,
-1,
}, { /* row 1 */
KEY_F2,
KEY_F3,
KEY_F4,
-1,
}, { /* row 2 */
KEY_UP,
KEY_LEFT,
KEY_RIGHT,
-1,
}, { /* row 3 */
KEY_DOWN,
-1,
-1,
-1,
},
},
.gpio_modes = {
GPIO100_KP_MKIN0,
GPIO101_KP_MKIN1,
GPIO102_KP_MKIN2,
GPIO97_KP_MKIN3,
GPIO103_KP_MKOUT0,
GPIO104_KP_MKOUT1,
GPIO105_KP_MKOUT2,
GPIO106_KP_MKOUT3,
},
};
static struct platform_device wwpc1100_keyboard = {
.name = "pxa27x-keyboard",
.id = -1,
.dev = {
.platform_data = &wwpc1100_kbd,
},
};
static struct platform_device *platform_devices[] __initdata = {
&wwpc1100_audio_device,
&wwpc1100_keyboard,
&wwpc1100_lcd_bl_device,
&wwpc1100_keyb_bl_device,
};
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
---
[-- Attachment #2: pxa27x-keyboard-support --]
[-- Type: text/plain, Size: 8147 bytes --]
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 6450968..18ce7b1 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -203,6 +203,12 @@ config KEYBOARD_OMAP
To compile this driver as a module, choose M here: the
module will be called omap-keypad.
+config KEYBOARD_PXA27x
+ tristate "PXA27x keyboard support"
+ depends on PXA27x
+ help
+ Enable support for PXA27x matrix keyboard controller
+
config KEYBOARD_AAED2000
tristate "AAED-2000 keyboard"
depends on MACH_AAED2000
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 586a0fe..fc1d1f2 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
diff --git a/drivers/input/keyboard/pxa27x_keyboard.c b/drivers/input/keyboard/pxa27x_keyboard.c
new file mode 100644
index 0000000..c01089a
--- /dev/null
+++ b/drivers/input/keyboard/pxa27x_keyboard.c
@@ -0,0 +1,257 @@
+/*
+ * linux/drivers/input/keyboard/pxa27x_keyboard.c
+ *
+ * Driver for the pxa27x matrix keyboard controller.
+ *
+ * Created: Feb 22, 2007
+ * Author: Rodolfo Giometti <giometti@linux.it>
+ *
+ * Based on a previous implementations by Kevin O'Connor
+ * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and
+ * on some suggestions by Nicolas Pitre <nico@cam.org>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/pxa27x_keyboard.h>
+
+#define DRIVER_NAME "pxa27x-keyboard"
+
+#define KPASMKP(col) (col/2 == 0 ? KPASMKP0 : \
+ col/2 == 1 ? KPASMKP1 : \
+ col/2 == 2 ? KPASMKP2 : KPASMKP3)
+#define KPASMKPx_MKC(row, col) (1<<(row+16*(col%2)))
+
+static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id)
+{
+ struct device *dev = dev_id;
+ struct pxa27x_keyboard_platform_data *pdev = dev->platform_data;
+ struct input_dev *button_dev = dev->driver_data;
+ unsigned long kpc = KPC;
+ int p, row, col, rel;
+
+ if (kpc & KPC_DI) {
+ unsigned long kpdk = KPDK;
+
+ if (!(kpdk & KPDK_DKP)) {
+ /* better luck next time */
+ } else if (kpc & KPC_REE0) {
+ unsigned long kprec = KPREC;
+ KPREC = 0x7f;
+
+ if (kprec & KPREC_OF0)
+ rel = (kprec & 0xff) + 0x7f;
+ else if (kprec & KPREC_UF0)
+ rel = (kprec & 0xff) - 0x7f - 0xff;
+ else
+ rel = (kprec & 0xff) - 0x7f;
+
+ if (rel)
+ input_report_rel(button_dev, REL_WHEEL, rel);
+ }
+ }
+
+ if (kpc & KPC_MI) {
+ /* report the status of every button */
+ for (row = 0; row < pdev->nr_rows; row++) {
+ for (col = 0; col < pdev->nr_cols; col++) {
+ p = KPASMKP(col) & KPASMKPx_MKC(row, col) ?
+ 1 : 0;
+ pr_debug("keycode %x - pressed %x\n",
+ pdev->keycodes[row][col], p);
+ input_report_key(button_dev,
+ pdev->keycodes[row][col], p);
+ }
+ }
+ input_sync(button_dev);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pxakbd_open(struct input_dev *dev)
+{
+ /* Set keypad control register */
+ KPC |= (KPC_ASACT |
+ KPC_MS_ALL |
+ (2<<6) | KPC_REE0 | KPC_DK_DEB_SEL |
+ KPC_ME | KPC_MIE | KPC_DE | KPC_DIE);
+
+ KPC &= ~KPC_AS; /* disable automatic scan */
+ KPC &= ~KPC_IMKP; /* do not ignore multiple keypresses */
+
+ /* Set rotary count to mid-point value */
+ KPREC = 0x7F;
+
+ /* Enable unit clock */
+ pxa_set_cken(CKEN19_KEYPAD, 1);
+
+ return 0;
+}
+
+static void pxakbd_close(struct input_dev *dev)
+{
+ /* Disable clock unit */
+ pxa_set_cken(CKEN19_KEYPAD, 0);
+}
+
+#ifdef CONFIG_PM
+static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
+
+ /* Save controller status */
+ pdata->reg_kpc = KPC;
+ pdata->reg_kprec = KPREC;
+
+ return 0;
+}
+
+static int pxakbd_resume(struct platform_device *pdev)
+{
+ struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
+
+ /* Restore controller status */
+ KPC = pdata->reg_kpc;
+ KPREC = pdata->reg_kprec;
+
+ /* Enable unit clock */
+ pxa_set_cken(CKEN19_KEYPAD, 1);
+
+ return 0;
+}
+#else
+#define pxakbd_suspend NULL
+#define pxakbd_resume NULL
+#endif
+
+static int pxakbd_probe(struct platform_device *pdev)
+{
+ struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct input_dev *button_dev;
+ int i, row, col, err;
+
+ /* Create and register the input driver. */
+ button_dev = input_allocate_device();
+ if (!button_dev) {
+ printk(KERN_ERR "Cannot request keypad device\n");
+ return -1;
+ }
+
+ set_bit(EV_KEY, button_dev->evbit);
+ set_bit(EV_REP, button_dev->evbit);
+ set_bit(EV_REL, button_dev->evbit);
+ set_bit(REL_WHEEL, button_dev->evbit);
+ for (row = 0; row < pdata->nr_rows; row++) {
+ for (col = 0; col < pdata->nr_cols; col++) {
+ int code = pdata->keycodes[row][col];
+ if (code <= 0)
+ continue;
+ set_bit(code, button_dev->keybit);
+ }
+ }
+
+ err = request_irq(IRQ_KEYPAD, pxakbd_irq_handler, SA_INTERRUPT,
+ DRIVER_NAME, dev);
+ if (err) {
+ printk(KERN_ERR "Cannot request keypad IRQ\n");
+ pxa_set_cken(CKEN19_KEYPAD, 0);
+ return -1;
+ }
+
+ /* Register the input device */
+ button_dev->name = DRIVER_NAME;
+ button_dev->id.bustype = BUS_HOST;
+ button_dev->open = pxakbd_open;
+ button_dev->close = pxakbd_close;
+
+ err = input_register_device(button_dev);
+ if (err)
+ goto input_register_device_error;
+
+ platform_set_drvdata(pdev, button_dev);
+
+ /* Setup GPIOs. */
+ for (i = 0; i < pdata->nr_rows + pdata->nr_cols; i++)
+ pxa_gpio_mode(pdata->gpio_modes[i]);
+
+ /*
+ * Store rows/cols info into keyboard registers.
+ */
+
+ KPC |= (pdata->nr_rows-1) << 26;
+ KPC |= (pdata->nr_cols-1) << 23;
+
+ for (col = 0; col < pdata->nr_cols; col++)
+ KPC |= KPC_MS0<<col;
+
+ printk(KERN_INFO "PXA27x keyboard controller enabled\n");
+
+ return 0;
+
+input_register_device_error :
+ free_irq(IRQ_KEYPAD, button_dev);
+ input_free_device(button_dev);
+
+ return -ENOMEM;
+}
+
+static int __devexit pxakbd_remove(struct platform_device *pdev)
+{
+ struct input_dev *button_dev = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+
+ free_irq(IRQ_KEYPAD, dev);
+
+ input_unregister_device(button_dev);
+ input_free_device(button_dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver pxakbd_driver = {
+ .probe = pxakbd_probe,
+ .remove = __devexit_p(pxakbd_remove),
+ .suspend = pxakbd_suspend,
+ .resume = pxakbd_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init pxakbd_init(void)
+{
+ return platform_driver_register(&pxakbd_driver);
+}
+
+static void __exit pxakbd_exit(void)
+{
+ platform_driver_unregister(&pxakbd_driver);
+}
+
+module_init(pxakbd_init);
+module_exit(pxakbd_exit);
+
+MODULE_DESCRIPTION("PXA27x Matrix Keyboard Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-arm/arch-pxa/pxa27x_keyboard.h b/include/asm-arm/arch-pxa/pxa27x_keyboard.h
new file mode 100644
index 0000000..3aaff92
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa27x_keyboard.h
@@ -0,0 +1,13 @@
+#define PXAKBD_MAXROW 8
+#define PXAKBD_MAXCOL 8
+
+struct pxa27x_keyboard_platform_data {
+ int nr_rows, nr_cols;
+ int keycodes[PXAKBD_MAXROW][PXAKBD_MAXCOL];
+ int gpio_modes[PXAKBD_MAXROW + PXAKBD_MAXCOL];
+
+#ifdef CONFIG_PM
+ u32 reg_kpc;
+ u32 reg_kprec;
+#endif
+};
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] INPUT/keyboard: PXA27x keyboard support
2007-03-02 16:05 ` [PATCH] INPUT/keyboard: PXA27x keyboard support Rodolfo Giometti
@ 2007-03-07 5:35 ` Dmitry Torokhov
0 siblings, 0 replies; 2+ messages in thread
From: Dmitry Torokhov @ 2007-03-07 5:35 UTC (permalink / raw)
To: Rodolfo Giometti
Cc: linux-input, linux-kernel, linux-arm-kernel, Nicolas Pitre
Hi Rodolfo,
On Friday 02 March 2007 11:05, Rodolfo Giometti wrote:
> Hello, here my last patch for the PXA27x keyboard support updated to
> linux-2.6.21-rc2.
>
> I added power management support (suspend/resume code).
The patch has bunch of issues that are hard to list because it was sent as
an attachment... Examples are: REL_WHEEL does not belong to evbit, using
input_free_device() is not allowed after input_unregister_device(), etc.
I tried to fix everything I notoiced; if you could try the patch below
and verify that it still works I will apply it to teh input tree.
Thanks.
--
Dmitry
From: Rodolfo Giometti <giometti@enneenne.com>
Input: add support for PXA27x keyboard controller
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/keyboard/Kconfig | 9 +
drivers/input/keyboard/Makefile | 1
drivers/input/keyboard/pxa27x_keyboard.c | 258 +++++++++++++++++++++++++++++
include/asm-arm/arch-pxa/pxa27x_keyboard.h | 13 +
4 files changed, 281 insertions(+)
Index: work/drivers/input/keyboard/Kconfig
===================================================================
--- work.orig/drivers/input/keyboard/Kconfig
+++ work/drivers/input/keyboard/Kconfig
@@ -203,6 +203,15 @@ config KEYBOARD_OMAP
To compile this driver as a module, choose M here: the
module will be called omap-keypad.
+config KEYBOARD_PXA27x
+ tristate "PXA27x keyboard support"
+ depends on PXA27x
+ help
+ Enable support for PXA27x matrix keyboard controller
+
+ To compile this driver as a module, choose M here: the
+ module will be called pxa27x_keyboard.
+
config KEYBOARD_AAED2000
tristate "AAED-2000 keyboard"
depends on MACH_AAED2000
Index: work/drivers/input/keyboard/Makefile
===================================================================
--- work.orig/drivers/input/keyboard/Makefile
+++ work/drivers/input/keyboard/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkb
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
Index: work/drivers/input/keyboard/pxa27x_keyboard.c
===================================================================
--- /dev/null
+++ work/drivers/input/keyboard/pxa27x_keyboard.c
@@ -0,0 +1,258 @@
+/*
+ * linux/drivers/input/keyboard/pxa27x_keyboard.c
+ *
+ * Driver for the pxa27x matrix keyboard controller.
+ *
+ * Created: Feb 22, 2007
+ * Author: Rodolfo Giometti <giometti@linux.it>
+ *
+ * Based on a previous implementations by Kevin O'Connor
+ * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and
+ * on some suggestions by Nicolas Pitre <nico@cam.org>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/pxa27x_keyboard.h>
+
+#define DRIVER_NAME "pxa27x-keyboard"
+
+#define KPASMKP(col) (col/2 == 0 ? KPASMKP0 : \
+ col/2 == 1 ? KPASMKP1 : \
+ col/2 == 2 ? KPASMKP2 : KPASMKP3)
+#define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2)))
+
+static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct pxa27x_keyboard_platform_data *pdev = dev->platform_data;
+ struct input_dev *input_dev = platform_get_drvdata(pdev);
+ unsigned long kpc = KPC;
+ int p, row, col, rel;
+
+ if (kpc & KPC_DI) {
+ unsigned long kpdk = KPDK;
+
+ if (!(kpdk & KPDK_DKP)) {
+ /* better luck next time */
+ } else if (kpc & KPC_REE0) {
+ unsigned long kprec = KPREC;
+ KPREC = 0x7f;
+
+ if (kprec & KPREC_OF0)
+ rel = (kprec & 0xff) + 0x7f;
+ else if (kprec & KPREC_UF0)
+ rel = (kprec & 0xff) - 0x7f - 0xff;
+ else
+ rel = (kprec & 0xff) - 0x7f;
+
+ if (rel) {
+ input_report_rel(input_dev, REL_WHEEL, rel);
+ input_sync(input_dev);
+ }
+ }
+ }
+
+ if (kpc & KPC_MI) {
+ /* report the status of every button */
+ for (row = 0; row < pdev->nr_rows; row++) {
+ for (col = 0; col < pdev->nr_cols; col++) {
+ p = KPASMKP(col) & KPASMKPx_MKC(row, col) ?
+ 1 : 0;
+ pr_debug("keycode %x - pressed %x\n",
+ pdev->keycodes[row][col], p);
+ input_report_key(input_dev,
+ pdev->keycodes[row][col], p);
+ }
+ }
+ input_sync(input_dev);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pxakbd_open(struct input_dev *dev)
+{
+ /* Set keypad control register */
+ KPC |= (KPC_ASACT |
+ KPC_MS_ALL |
+ (2<<6) | KPC_REE0 | KPC_DK_DEB_SEL |
+ KPC_ME | KPC_MIE | KPC_DE | KPC_DIE);
+
+ KPC &= ~KPC_AS; /* disable automatic scan */
+ KPC &= ~KPC_IMKP; /* do not ignore multiple keypresses */
+
+ /* Set rotary count to mid-point value */
+ KPREC = 0x7F;
+
+ /* Enable unit clock */
+ pxa_set_cken(CKEN19_KEYPAD, 1);
+
+ return 0;
+}
+
+static void pxakbd_close(struct input_dev *dev)
+{
+ /* Disable clock unit */
+ pxa_set_cken(CKEN19_KEYPAD, 0);
+}
+
+#ifdef CONFIG_PM
+static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
+
+ /* Save controller status */
+ pdata->reg_kpc = KPC;
+ pdata->reg_kprec = KPREC;
+
+ return 0;
+}
+
+static int pxakbd_resume(struct platform_device *pdev)
+{
+ struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
+ struct input_dev *input_dev = platform_get_drvdata(pdev);
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users) {
+ /* Restore controller status */
+ KPC = pdata->reg_kpc;
+ KPREC = pdata->reg_kprec;
+
+ /* Enable unit clock */
+ pxa_set_cken(CKEN19_KEYPAD, 1);
+ }
+
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+#else
+#define pxakbd_suspend NULL
+#define pxakbd_resume NULL
+#endif
+
+static int __devinit pxakbd_probe(struct platform_device *pdev)
+{
+ struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data;
+ struct input_dev *input_dev;
+ int i, row, col, error;
+
+ /* Create and register the input driver. */
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "Cannot request keypad device\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = DRIVER_NAME;
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->open = pxakbd_open;
+ input_dev->close = pxakbd_close;
+ input_dev->cdev.dev = &pdev->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
+ input_dev->relbit[LONG(REL_WHEEL)] = BIT(REL_WHEEL);
+ for (row = 0; row < pdata->nr_rows; row++) {
+ for (col = 0; col < pdata->nr_cols; col++) {
+ int code = pdata->keycodes[row][col];
+ if (code > 0)
+ set_bit(code, input_dev->keybit);
+ }
+ }
+
+ error = request_irq(IRQ_KEYPAD, pxakbd_irq_handler, SA_INTERRUPT,
+ DRIVER_NAME, pdev);
+ if (error) {
+ printk(KERN_ERR "Cannot request keypad IRQ\n");
+ pxa_set_cken(CKEN19_KEYPAD, 0);
+ goto err_free_dev;
+ }
+
+ platform_set_drvdata(pdev, input_dev);
+
+ /* Register the input device */
+ error = input_register_device(input_dev);
+ if (error)
+ goto err_free_irq;
+
+ /* Setup GPIOs. */
+ for (i = 0; i < pdata->nr_rows + pdata->nr_cols; i++)
+ pxa_gpio_mode(pdata->gpio_modes[i]);
+
+ /*
+ * Store rows/cols info into keyboard registers.
+ */
+
+ KPC |= (pdata->nr_rows - 1) << 26;
+ KPC |= (pdata->nr_cols - 1) << 23;
+
+ for (col = 0; col < pdata->nr_cols; col++)
+ KPC |= KPC_MS0 << col;
+
+ return 0;
+
+ err_free_irq:
+ platform_set_drvdata(pdev, NULL);
+ free_irq(IRQ_KEYPAD, pdev);
+ err_free_dev:
+ input_free_device(input_dev);
+ return error;
+}
+
+static int __devexit pxakbd_remove(struct platform_device *pdev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(pdev);
+
+ input_unregister_device(input_dev);
+ free_irq(IRQ_KEYPAD, pdev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver pxakbd_driver = {
+ .probe = pxakbd_probe,
+ .remove = __devexit_p(pxakbd_remove),
+ .suspend = pxakbd_suspend,
+ .resume = pxakbd_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init pxakbd_init(void)
+{
+ return platform_driver_register(&pxakbd_driver);
+}
+
+static void __exit pxakbd_exit(void)
+{
+ platform_driver_unregister(&pxakbd_driver);
+}
+
+module_init(pxakbd_init);
+module_exit(pxakbd_exit);
+
+MODULE_DESCRIPTION("PXA27x Matrix Keyboard Driver");
+MODULE_LICENSE("GPL");
Index: work/include/asm-arm/arch-pxa/pxa27x_keyboard.h
===================================================================
--- /dev/null
+++ work/include/asm-arm/arch-pxa/pxa27x_keyboard.h
@@ -0,0 +1,13 @@
+#define PXAKBD_MAXROW 8
+#define PXAKBD_MAXCOL 8
+
+struct pxa27x_keyboard_platform_data {
+ int nr_rows, nr_cols;
+ int keycodes[PXAKBD_MAXROW][PXAKBD_MAXCOL];
+ int gpio_modes[PXAKBD_MAXROW + PXAKBD_MAXCOL];
+
+#ifdef CONFIG_PM
+ u32 reg_kpc;
+ u32 reg_kprec;
+#endif
+};
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-03-07 5:35 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20061120155518.GA6910@enneenne.com>
[not found] ` <20061120160516.GC6910@enneenne.com>
[not found] ` <200611240109.22900.dtor@insightbb.com>
[not found] ` <20070222224701.GB6179@enneenne.com>
2007-03-02 16:05 ` [PATCH] INPUT/keyboard: PXA27x keyboard support Rodolfo Giometti
2007-03-07 5:35 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox