Re: mm snapshot broken-out-2007-03-05-02-22.tar.gz uploaded

[Andrew Morton <akpm@linux-foundation.org>]

On Wed, 07 Mar 2007 12:36:36 +0100 Michal Piotrowski <michal.k.k.piotrowski@gmail.com> wrote:

> Michal Piotrowski napisał(a):
> > Hi,
> > 
> > akpm@linux-foundation.org napisał(a):
> >> The mm snapshot broken-out-2007-03-05-02-22.tar.gz has been uploaded to
> >>
> >>    ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/broken-out-2007-03-05-02-22.tar.gz
> >>
> >> It contains the following patches against 2.6.21-rc2:
> >>
> > 
> > Outstanding issue - my 3d surround doesn't work since 2.6.20.
> > 
> > I'll bisect this commits
> > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=724339d76d9407cd1a8ad32a9c1fdf64840cc51b
> > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=6026179519896e7d35b2564e7544487d1c8948e7
> > 
> > 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> >         Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard
> >         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> >         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> >         Latency: 0
> >         Interrupt: pin B routed to IRQ 17
> >         Region 0: I/O ports at d000 [size=256]
> >         Region 1: I/O ports at d400 [size=64]
> >         Region 2: Memory at f5fff800 (32-bit, non-prefetchable) [size=512]
> >         Region 3: Memory at f5fff400 (32-bit, non-prefetchable) [size=256]
> >         Capabilities: [50] Power Management version 2
> >                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> >                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 
> > Advanced Linux Sound Architecture Driver Version 1.0.14rc2 (Wed Feb 14 07:42:13 2007 UTC).
> > 
> > CONFIG_SND=m
> > CONFIG_SND_TIMER=m
> > CONFIG_SND_PCM=m
> > CONFIG_SND_RAWMIDI=m
> > CONFIG_SND_SEQUENCER=m
> > CONFIG_SND_SEQ_DUMMY=m
> > CONFIG_SND_OSSEMUL=y
> > CONFIG_SND_MIXER_OSS=m
> > CONFIG_SND_PCM_OSS=m
> > CONFIG_SND_PCM_OSS_PLUGINS=y
> > CONFIG_SND_SEQUENCER_OSS=y
> > CONFIG_SND_RTCTIMER=m
> > CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> > # CONFIG_SND_DYNAMIC_MINORS is not set
> > CONFIG_SND_SUPPORT_OLD_API=y
> > CONFIG_SND_VERBOSE_PROCFS=y
> > # CONFIG_SND_VERBOSE_PRINTK is not set
> > # CONFIG_SND_DEBUG is not set
> > 
> > CONFIG_SND_AC97_CODEC=m
> > CONFIG_SND_DUMMY=m
> > CONFIG_SND_VIRMIDI=m
> > 
> > CONFIG_SND_INTEL8X0=m
> 
> As I said above, center and rear speakers doesn't work with this patch.
> 
> $ git-bisect good
> 831466f4ad2b5fe23dff77edbe6a7c244435e973 is first bad commit
> commit 831466f4ad2b5fe23dff77edbe6a7c244435e973
> Author: Randy Cushman <rcushman_linux@earthlink.net>
> Date:   Tue Dec 19 18:42:16 2006 +0100
> 
>     [ALSA] ac97 - fix microphone and line_in selection logic
> 
>     This patch fixes the Microphone and LINE_IN select logic for
>     Analog Devices surround codecs with shared jacks.  The existing
>     code can never utilize the shared jacks for Microphone and LINE_IN
>     due to the reversed jack selection logic.  The patched code
>     correctly selects the shared jack for input if the 'Channel Mode'
>     selector does not specify that the jack is to be used for output.
>     Specifically, in '2ch' mode the Center/LFE jack is used for
>     microphone input and the Surround jack is used for LINE_IN,
>     in '4ch' mode the Center/LFE jack is used for microphone input
>     and the Surround jack is used for output, and in '6ch' mode
>     both jacks are used for output.
> 
>     Signed-off-by: Randy Cushman <rcushman_linux@earthlink.net>
>     Signed-off-by: Takashi Iwai <tiwai@suse.de>
>     Signed-off-by: Jaroslav Kysela <perex@suse.cz>
> 

Is 2.6.21-rc3 similarly broken?

This patch reverts cleanly if needed.