public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@suse.de>
To: linux-kernel@vger.kernel.org, Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mundt <lethal@linux-sh.org>,
	Ralf Baechle <ralf@linux-mips.org>, Andi Kleen <ak@suse.de>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Richard Henderson <rth@twiddle.net>,
	Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
	Paul Mackerras <paulus@samba.org>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [patch v2] Fixes and cleanups for earlyprintk aka boot console.
Date: Thu, 15 Mar 2007 16:46:39 +0100	[thread overview]
Message-ID: <20070315154638.944768000@suse.de> (raw)

[-- Attachment #1: early-printk-boot-console.patch --]
[-- Type: text/plain, Size: 9877 bytes --]

The console subsystem already has an idea of a boot console, using the
CON_BOOT flag.  The implementation has some flaws though.  The major
problem is that presence of a boot console makes register_console()
ignore any other console devices (unless explicitly specified on the
kernel command line).

This patch fixes the console selection code to *not* consider a boot
console a full-featured one, so the first non-boot console registering
will become the default console instead.  This way the unregister call
for the boot console in the register_console() function actually
triggers and the handover from the boot console to the real console
device works smoothly.  Added a printk for the handover, so you know
which console device the output goes to when the boot console stops
printing messages.

The disable_early_printk() call is obsolete with that patch, explicitly
disabling the early console isn't needed any more as it works
automagically with that patch.

I've walked through the tree, dropped all disable_early_printk()
instances found below arch/ and tagged the consoles with CON_BOOT if
needed.  The code is tested on x86, sh (thanks to Paul) and mips
(thanks to Ralf).

Changes to last version: Rediffed against -rc3, adapted to mips
cleanups by Ralf, fixed "udbg-immortal" cmd line arg on powerpc.

Signed-off-by: Gerd Hoffmann <kraxel@exsuse.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/alpha/kernel/setup.c         |    9 ---------
 arch/alpha/kernel/srmcons.c       |    2 +-
 arch/mips/kernel/early_printk.c   |    5 -----
 arch/powerpc/kernel/udbg.c        |   19 ++++++-------------
 arch/sh/kernel/early_printk.c     |   18 ++++++------------
 arch/sh64/kernel/early_printk.c   |    8 +-------
 arch/x86_64/kernel/early_printk.c |   20 +++++---------------
 drivers/char/tty_io.c             |    5 -----
 kernel/printk.c                   |   26 ++++++++++++++++----------
 9 files changed, 35 insertions(+), 77 deletions(-)

===================================================================
Index: vanilla-2.6.21-rc3/arch/x86_64/kernel/early_printk.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/x86_64/kernel/early_printk.c
+++ vanilla-2.6.21-rc3/arch/x86_64/kernel/early_printk.c
@@ -244,22 +244,12 @@ static int __init setup_early_printk(cha
  		early_console = &simnow_console;
  		keep_early = 1;
 	}
+
+	if (keep_early)
+		early_console->flags &= ~CON_BOOT;
+	else
+		early_console->flags |= CON_BOOT;
 	register_console(early_console);
 	return 0;
 }
-
 early_param("earlyprintk", setup_early_printk);
-
-void __init disable_early_printk(void)
-{
-	if (!early_console_initialized || !early_console)
-		return;
-	if (!keep_early) {
-		printk("disabling early console\n");
-		unregister_console(early_console);
-		early_console_initialized = 0;
-	} else {
-		printk("keeping early console\n");
-	}
-}
-
Index: vanilla-2.6.21-rc3/kernel/printk.c
===================================================================
--- vanilla-2.6.21-rc3.orig/kernel/printk.c
+++ vanilla-2.6.21-rc3/kernel/printk.c
@@ -931,8 +931,16 @@ void register_console(struct console *co
 {
 	int i;
 	unsigned long flags;
+	struct console *bootconsole = NULL;
 
-	if (preferred_console < 0)
+	if (console_drivers) {
+		if (console->flags & CON_BOOT)
+			return;
+		if (console_drivers->flags & CON_BOOT)
+			bootconsole = console_drivers;
+	}
+
+	if (preferred_console < 0 || bootconsole || !console_drivers)
 		preferred_console = selected_console;
 
 	/*
@@ -978,8 +986,11 @@ void register_console(struct console *co
 	if (!(console->flags & CON_ENABLED))
 		return;
 
-	if (console_drivers && (console_drivers->flags & CON_BOOT)) {
-		unregister_console(console_drivers);
+	if (bootconsole) {
+		printk(KERN_INFO "console handover: boot [%s%d] -> real [%s%d]\n",
+		       bootconsole->name, bootconsole->index,
+		       console->name, console->index);
+		unregister_console(bootconsole);
 		console->flags &= ~CON_PRINTBUFFER;
 	}
 
@@ -1030,16 +1041,11 @@ int unregister_console(struct console *c
 		}
 	}
 
-	/* If last console is removed, we re-enable picking the first
-	 * one that gets registered. Without that, pmac early boot console
-	 * would prevent fbcon from taking over.
-	 *
+	/*
 	 * If this isn't the last console and it has CON_CONSDEV set, we
 	 * need to set it on the next preferred console.
 	 */
-	if (console_drivers == NULL)
-		preferred_console = selected_console;
-	else if (console->flags & CON_CONSDEV)
+	if (console_drivers != NULL && console->flags & CON_CONSDEV)
 		console_drivers->flags |= CON_CONSDEV;
 
 	release_console_sem();
Index: vanilla-2.6.21-rc3/drivers/char/tty_io.c
===================================================================
--- vanilla-2.6.21-rc3.orig/drivers/char/tty_io.c
+++ vanilla-2.6.21-rc3/drivers/char/tty_io.c
@@ -141,8 +141,6 @@ static DECLARE_MUTEX(allocated_ptys_lock
 static int ptmx_open(struct inode *, struct file *);
 #endif
 
-extern void disable_early_printk(void);
-
 static void initialize_tty_struct(struct tty_struct *tty);
 
 static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
@@ -3893,9 +3891,6 @@ void __init console_init(void)
 	 * set up the console device so that later boot sequences can 
 	 * inform about problems etc..
 	 */
-#ifdef CONFIG_EARLY_PRINTK
-	disable_early_printk();
-#endif
 	call = __con_initcall_start;
 	while (call < __con_initcall_end) {
 		(*call)();
Index: vanilla-2.6.21-rc3/arch/alpha/kernel/setup.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/alpha/kernel/setup.c
+++ vanilla-2.6.21-rc3/arch/alpha/kernel/setup.c
@@ -744,15 +744,6 @@ setup_arch(char **cmdline_p)
 	paging_init();
 }
 
-void __init
-disable_early_printk(void)
-{
-	if (alpha_using_srm && srmcons_output) {
-		unregister_srm_console();
-		srmcons_output = 0;
-	}
-}
-
 static char sys_unknown[] = "Unknown";
 static char systype_names[][16] = {
 	"0",
Index: vanilla-2.6.21-rc3/arch/alpha/kernel/srmcons.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/alpha/kernel/srmcons.c
+++ vanilla-2.6.21-rc3/arch/alpha/kernel/srmcons.c
@@ -300,7 +300,7 @@ static struct console srmcons = {
 	.write		= srm_console_write,
 	.device		= srm_console_device,
 	.setup		= srm_console_setup,
-	.flags		= CON_PRINTBUFFER,
+	.flags		= CON_PRINTBUFFER | CON_BOOT,
 	.index		= -1,
 };
 
Index: vanilla-2.6.21-rc3/arch/powerpc/kernel/udbg.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/powerpc/kernel/udbg.c
+++ vanilla-2.6.21-rc3/arch/powerpc/kernel/udbg.c
@@ -142,29 +142,22 @@ static void udbg_console_write(struct co
 static struct console udbg_console = {
 	.name	= "udbg",
 	.write	= udbg_console_write,
-	.flags	= CON_PRINTBUFFER | CON_ENABLED,
+	.flags	= CON_PRINTBUFFER | CON_ENABLED | CON_BOOT,
 	.index	= -1,
 };
 
 static int early_console_initialized;
 
-void __init disable_early_printk(void)
-{
-	if (!early_console_initialized)
-		return;
-	if (strstr(boot_command_line, "udbg-immortal")) {
-		printk(KERN_INFO "early console immortal !\n");
-		return;
-	}
-	unregister_console(&udbg_console);
-	early_console_initialized = 0;
-}
-
 /* called by setup_system */
 void register_early_udbg_console(void)
 {
 	if (early_console_initialized)
 		return;
+
+	if (strstr(boot_command_line, "udbg-immortal")) {
+		printk(KERN_INFO "early console immortal !\n");
+		udbg_console.flags &= ~CON_BOOT;
+	}
 	early_console_initialized = 1;
 	register_console(&udbg_console);
 }
Index: vanilla-2.6.21-rc3/arch/sh/kernel/early_printk.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/sh/kernel/early_printk.c
+++ vanilla-2.6.21-rc3/arch/sh/kernel/early_printk.c
@@ -192,20 +192,14 @@ int __init setup_early_printk(char *buf)
 	}
 #endif
 
-	if (likely(early_console))
+	if (likely(early_console)) {
+		if (keep_early)
+			early_console->flags &= ~CON_BOOT;
+		else
+			early_console->flags |= CON_BOOT;
 		register_console(early_console);
+	}
 
 	return 0;
 }
 early_param("earlyprintk", setup_early_printk);
-
-void __init disable_early_printk(void)
-{
-	if (!early_console_initialized || !early_console)
-		return;
-	if (!keep_early) {
-		printk("disabling early console\n");
-		unregister_console(early_console);
-	} else
-		printk("keeping early console\n");
-}
Index: vanilla-2.6.21-rc3/arch/sh64/kernel/early_printk.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/sh64/kernel/early_printk.c
+++ vanilla-2.6.21-rc3/arch/sh64/kernel/early_printk.c
@@ -79,7 +79,7 @@ static struct console sh_console = {
 	.name		= "scifcon",
 	.write		= sh_console_write,
 	.setup		= sh_console_setup,
-	.flags		= CON_PRINTBUFFER,
+	.flags		= CON_PRINTBUFFER | CON_BOOT,
 	.index		= -1,
 };
 
@@ -97,9 +97,3 @@ void __init enable_early_printk(void)
 
 	register_console(&sh_console);
 }
-
-void disable_early_printk(void)
-{
-	unregister_console(&sh_console);
-}
-
Index: vanilla-2.6.21-rc3/arch/mips/kernel/early_printk.c
===================================================================
--- vanilla-2.6.21-rc3.orig/arch/mips/kernel/early_printk.c
+++ vanilla-2.6.21-rc3/arch/mips/kernel/early_printk.c
@@ -33,8 +33,3 @@ void __init setup_early_printk(void)
 {
 	register_console(&early_console);
 }
-
-void __init disable_early_printk(void)
-{
-	unregister_console(&early_console);
-}

-- 
Gerd Hoffmann <kraxel@suse.de>


             reply	other threads:[~2007-03-15 15:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-03-15 15:46 Gerd Hoffmann [this message]
2007-03-15 20:58 ` [patch v2] Fixes and cleanups for earlyprintk aka boot console John Stoffel
2007-03-16  8:10   ` Gerd Hoffmann
2007-03-29 16:37   ` Olaf Dabrunz
2007-04-03 15:42     ` John Stoffel
2007-04-11 18:33       ` Olaf Dabrunz
2007-04-24  6:42 ` Andrew Morton
2007-04-24 14:04   ` Gerd Hoffmann
2007-04-24 17:27     ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070315154638.944768000@suse.de \
    --to=kraxel@suse.de \
    --cc=ak@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=benh@kernel.crashing.org \
    --cc=ink@jurassic.park.msu.ru \
    --cc=jeremy@goop.org \
    --cc=lethal@linux-sh.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulus@samba.org \
    --cc=ralf@linux-mips.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox