public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jens Axboe <jens.axboe@oracle.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-aio@kvack.org,
	reiserfs-dev@namesys.com, "Vladimir V. Saveliev" <vs@namesys.com>,
	linux-mm@kvack.org
Subject: Re: dio_get_page() lockdep complaints
Date: Thu, 19 Apr 2007 10:01:57 +0200	[thread overview]
Message-ID: <20070419080157.GC20928@kernel.dk> (raw)
In-Reply-To: <20070419010142.5b7b00cd.akpm@linux-foundation.org>

On Thu, Apr 19 2007, Andrew Morton wrote:
> On Thu, 19 Apr 2007 09:38:30 +0200 Jens Axboe <jens.axboe@oracle.com> wrote:
> 
> > Hi,
> > 
> > Doing some testing on CFQ, I ran into this 100% reproducible report:
> > 
> > =======================================================
> > [ INFO: possible circular locking dependency detected ]
> > 2.6.21-rc7 #5
> > -------------------------------------------------------
> > fio/9741 is trying to acquire lock:
> >  (&mm->mmap_sem){----}, at: [<b018cb34>] dio_get_page+0x54/0x161
> > 
> > but task is already holding lock:
> >  (&inode->i_mutex){--..}, at: [<b038c6e5>] mutex_lock+0x1c/0x1f
> > 
> > which lock already depends on the new lock.
> > 
> 
> This is the correct ranking: i_mutex outside mmap_sem.
> 
> > 
> > the existing dependency chain (in reverse order) is:
> > 
> > -> #1 (&inode->i_mutex){--..}:
> >        [<b013e3fb>] __lock_acquire+0xdee/0xf9c
> >        [<b013e600>] lock_acquire+0x57/0x70
> >        [<b038c4a5>] __mutex_lock_slowpath+0x73/0x297
> >        [<b038c6e5>] mutex_lock+0x1c/0x1f
> >        [<b01b17e9>] reiserfs_file_release+0x54/0x447
> >        [<b016afe7>] __fput+0x53/0x101
> >        [<b016b0ee>] fput+0x19/0x1c
> >        [<b015bcd5>] remove_vma+0x3b/0x4d
> >        [<b015c659>] do_munmap+0x17f/0x1cf
> >        [<b015c6db>] sys_munmap+0x32/0x42
> >        [<b0103f04>] sysenter_past_esp+0x5d/0x99
> >        [<ffffffff>] 0xffffffff
> > 
> > -> #0 (&mm->mmap_sem){----}:
> >        [<b013e259>] __lock_acquire+0xc4c/0xf9c
> >        [<b013e600>] lock_acquire+0x57/0x70
> >        [<b0137b92>] down_read+0x3a/0x4c
> >        [<b018cb34>] dio_get_page+0x54/0x161
> >        [<b018d7a9>] __blockdev_direct_IO+0x514/0xe2a
> >        [<b01cf449>] ext3_direct_IO+0x98/0x1e5
> >        [<b014e8df>] generic_file_direct_IO+0x63/0x133
> >        [<b01500e9>] generic_file_aio_read+0x16b/0x222
> >        [<b017f8b6>] aio_rw_vect_retry+0x5a/0x116
> >        [<b0180147>] aio_run_iocb+0x69/0x129
> >        [<b0180a78>] io_submit_one+0x194/0x2eb
> >        [<b0181331>] sys_io_submit+0x92/0xe7
> >        [<b0103f90>] syscall_call+0x7/0xb
> >        [<ffffffff>] 0xffffffff
> 
> But here reiserfs is taking i_mutex in its file_operations.release(),
> which can be called under mmap_sem.
> 
> Vladimir's recent de14569f94513279e3d44d9571a421e9da1759ae.
> "resierfs: avoid tail packing if an inode was ever mmapped" comes real
> close to this code, but afaict it did not cause this bug.
> 
> I can't think of anything which we've done in the 2.6.21 cycle which
> would have caused this to start happening.  Odd.

The bug may be holder, let me know if you want me to check 2.6.20 or
earlier.

> > The test run was fio, the job file used is:
> > 
> > # fio job file snip below
> > [global]
> > bs=4k
> > buffered=0
> > ioengine=libaio
> > iodepth=4
> > thread
> > 
> > [readers]
> > numjobs=8
> > size=128m
> > rw=read
> > # fio job file snip above
> > 
> > Filesystem was ext3, default mkfs and mount options. Kernel was
> > 2.6.21-rc7 as of this morning, with some CFQ patches applied.
> > 
> 
> It's interesting that lockdep learned the (wrong) ranking from a reiserfs
> operation then later detected it being violated by ext3.

It's a scratch test box, which for some reason has reiserfs as the
rootfs. So reiser gets to run first :-)

-- 
Jens Axboe


  reply	other threads:[~2007-04-19  8:18 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-19  7:38 dio_get_page() lockdep complaints Jens Axboe
2007-04-19  8:01 ` Andrew Morton
2007-04-19  8:01   ` Jens Axboe [this message]
2007-04-19  8:25     ` Andrew Morton
2007-04-19  8:34       ` Jens Axboe
2007-04-19 12:43         ` Vladimir V. Saveliev
2007-04-19 12:49           ` Jens Axboe
2007-04-19 12:52             ` Jens Axboe
2007-04-19 13:53               ` Roland Dreier
2007-04-19 14:20                 ` Jens Axboe
2007-04-19 14:15         ` Jens Axboe
2007-04-19 14:55           ` Vladimir V. Saveliev
2007-04-19 14:57       ` Vladimir V. Saveliev
2007-04-19 16:42         ` Andrew Morton
2007-04-19 14:36   ` Chris Mason
2007-11-09 17:02 ` Peter Zijlstra
2007-11-09 17:30   ` Zach Brown
2007-11-09 17:45     ` Trond Myklebust
2007-11-09 17:48       ` Zach Brown
2007-11-09 18:01         ` Chris Mason
2007-11-09 18:35           ` Zach Brown
2007-11-09 18:53             ` Chris Mason
2007-11-09 18:57               ` Chris Mason
2007-11-09 19:16                 ` Zach Brown
2007-11-09 19:35                   ` Chris Mason
2007-11-11 19:49       ` Peter Zijlstra
2007-11-12  8:45         ` Martin Schwidefsky
2007-11-12  9:27           ` Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070419080157.GC20928@kernel.dk \
    --to=jens.axboe@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-aio@kvack.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=reiserfs-dev@namesys.com \
    --cc=vs@namesys.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox