* ACPI interpreter errors
@ 2007-04-27 12:07 Udo A. Steinberg
2007-04-27 18:05 ` Moore, Robert
0 siblings, 1 reply; 4+ messages in thread
From: Udo A. Steinberg @ 2007-04-27 12:07 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: Linux ACPI Mailing List
[-- Attachment #1.1: Type: text/plain, Size: 1320 bytes --]
Hello,
With 2.6.21 I am getting the following errors from the ACPI interpreter on an
Intel S5000PSL board:
Allocate Port Service[0000:02:02.0:pcie20]
Allocate Port Service[0000:02:02.0:pcie21]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:02.0:pcie01 failed with error 2
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:03.0:pcie01 failed with error 1
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:04.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:05.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:06.0:pcie01 failed with error 2
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:07.0:pcie01 failed with error 1
The complete dmesg output is attached. If you need more information, please let
me know.
Cheers,
- Udo
[-- Attachment #1.2: dmesg.txt --]
[-- Type: application/octet-stream, Size: 27272 bytes --]
Linux version 2.6.21 (root@starlake) (gcc version 4.1.2) #1 SMP PREEMPT Fri Apr 27 13:56:52 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009ec00 end: 000000000009ec00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009ec00 size: 0000000000061400 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007e255000 end: 000000007e355000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007e355000 size: 00000000000b9000 end: 000000007e40e000 type: 4
copy_e820_map() start: 000000007e40e000 size: 0000000001634000 end: 000000007fa42000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007fa42000 size: 0000000000058000 end: 000000007fa9a000 type: 2
copy_e820_map() start: 000000007fa9a000 size: 0000000000036000 end: 000000007fad0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007fad0000 size: 000000000004a000 end: 000000007fb1a000 type: 4
copy_e820_map() start: 000000007fb1a000 size: 0000000000012000 end: 000000007fb2c000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007fb2c000 size: 000000000000e000 end: 000000007fb3a000 type: 3
copy_e820_map() start: 000000007fb3a000 size: 00000000000c6000 end: 000000007fc00000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007fc00000 size: 0000000000400000 end: 0000000080000000 type: 2
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000ffc00000 size: 000000000000c000 end: 00000000ffc0c000 type: 2
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e355000 (usable)
BIOS-e820: 000000007e355000 - 000000007e40e000 (ACPI NVS)
BIOS-e820: 000000007e40e000 - 000000007fa42000 (usable)
BIOS-e820: 000000007fa42000 - 000000007fa9a000 (reserved)
BIOS-e820: 000000007fa9a000 - 000000007fad0000 (usable)
BIOS-e820: 000000007fad0000 - 000000007fb1a000 (ACPI NVS)
BIOS-e820: 000000007fb1a000 - 000000007fb2c000 (usable)
BIOS-e820: 000000007fb2c000 - 000000007fb3a000 (ACPI data)
BIOS-e820: 000000007fb3a000 - 000000007fc00000 (usable)
BIOS-e820: 000000007fc00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffc00000 - 00000000ffc0c000 (reserved)
1148MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fd180
Entering add_active_range(0, 0, 523264) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523264
early_node_map[1] active PFN ranges
0: 0 -> 523264
On node 0 totalpages: 523264
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2296 pages used for memmap
HighMem zone: 291592 pages, LIFO batch:31
DMI 2.5 present.
ACPI: RSDP 000F03B0, 0024 (r2 INTEL )
ACPI: XSDT 7FB39120, 004C (r1 INTEL S5000PSL 0 INTL 1000013)
ACPI: FACP 7FB36000, 00F4 (r3 INTEL S5000PSL 0 INTL 1000013)
ACPI: DSDT 7FB2F000, 536F (r2 INTEL S5000PSL 1 INTL 1000013)
ACPI: FACS 7FAD0000, 0040
ACPI: APIC 7FB35000, 00C8 (r1 INTEL S5000PSL 0 INTL 1000013)
ACPI: SPCR 7FB2E000, 0050 (r1 INTEL S5000PSL 0 INTL 1000013)
ACPI: HPET 7FB2D000, 0038 (r1 INTEL S5000PSL 1 INTL 1000013)
ACPI: MCFG 7FB2C000, 003C (r1 INTEL S5000PSL 1 INTL 1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists. Total pages: 519176
Kernel command line: bzImage-2.6.21-32-starlake root=/dev/sda1 parport=auto video=atifb:1152x864@75
Unknown boot option `bzImage-2.6.21-32-starlake': ignoring
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0467000 soft=c0463000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.207 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069404k/2093056k available (2386k kernel code, 21108k reserved, 826k data, 212k init, 1174108k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0429000 - 0xc045e000 ( 212 kB)
.data : 0xc03548c3 - 0xc04232ac ( 826 kB)
.text : 0xc0100000 - 0xc03548c3 (2386 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3992.92 BogoMIPS (lpj=7985844)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 13k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=c0468000 soft=c0464000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=7980047)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Booting processor 2/6 eip 2000
CPU 2 irqstacks, hard=c0469000 soft=c0465000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=7980140)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Booting processor 3/7 eip 2000
CPU 3 irqstacks, hard=c046a000 soft=c0466000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980138)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06
Total of 4 processors activated (15963.08 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
migration_cost=40,8970
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:0c:0c.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC32._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:01: iomem range 0xfec00000-0xfecfffff has been reserved
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f has been reserved
pnp: 00:06: ioport range 0x800-0x87f has been reserved
Time: tsc clocksource has been installed.
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:02.0
IO window: 2000-2fff
MEM window: f8000000-f88fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.0
IO window: 2000-2fff
MEM window: f8000000-f88fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: 2000-2fff
MEM window: f8000000-f89fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: f8a00000-f8afffff
PREFETCH window: f0000000-f7ffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.3 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:01:00.0 to 64
Allocate Port Service[0000:01:00.0:pcie10]
Allocate Port Service[0000:01:00.0:pcie11]
PCI: Setting latency timer of device 0000:02:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.0:pcie20]
Allocate Port Service[0000:02:00.0:pcie21]
PCI: Setting latency timer of device 0000:02:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:02.0:pcie20]
Allocate Port Service[0000:02:02.0:pcie21]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:02.0:pcie01 failed with error 2
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:03.0:pcie01 failed with error 1
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:04.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:05.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:06.0:pcie01 failed with error 2
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:07.0:pcie01 failed with error 1
ACPI: PCI Interrupt 0000:0c:0c.0[A] -> GSI 17 (level, low) -> IRQ 18
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 50000
radeonfb: Reversed TMDS detected
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-1: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Display is GTF capable
Console: switching to colour frame buffer device 160x64
radeonfb (0000:0c:0c.0): ATI Radeon Q^
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.25.0 20060524 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 1 RAM disks of 65536K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:0f:51:68
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.1 to 64
e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:0f:51:69
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ahci 0000:00:1f.2: version 2.1
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
ata1: SATA max UDMA/133 cmd 0xf881e100 ctl 0x00000000 bmdma 0x00000000 irq 20
ata2: SATA max UDMA/133 cmd 0xf881e180 ctl 0x00000000 bmdma 0x00000000 irq 20
ata3: SATA max UDMA/133 cmd 0xf881e200 ctl 0x00000000 bmdma 0x00000000 irq 20
ata4: SATA max UDMA/133 cmd 0xf881e280 ctl 0x00000000 bmdma 0x00000000 irq 20
ata5: SATA max UDMA/133 cmd 0xf881e300 ctl 0x00000000 bmdma 0x00000000 irq 20
ata6: SATA max UDMA/133 cmd 0xf881e380 ctl 0x00000000 bmdma 0x00000000 irq 20
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD080HJ, WT100-41, max UDMA7
ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ WT10 PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
ata_piix 0000:00:1f.1: version 2.10ac1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata7: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130c0 irq 14
ata8: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130c8 irq 15
scsi6 : ata_piix
ata7.00: ATAPI, max UDMA/33
ata7.00: configured for UDMA/33
scsi7 : ata_piix
ATA: abnormal status 0x7F on port 0x00010177
scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8b00400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x000030a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00003080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
input: PC Speaker as /class/input/input5
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:08.0 to 64
Intel(R) I/OAT DMA Engine found, 4 channels
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 597k
Adding 62500872k swap on /dev/sda3. Priority:-1 extents:1 across:62500872k
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: ACPI interpreter errors
2007-04-27 12:07 ACPI interpreter errors Udo A. Steinberg
@ 2007-04-27 18:05 ` Moore, Robert
2007-04-28 6:31 ` ACPI interpreter errors (aer_init) Len Brown
0 siblings, 1 reply; 4+ messages in thread
From: Moore, Robert @ 2007-04-27 18:05 UTC (permalink / raw)
To: Udo A. Steinberg, Linux Kernel Mailing List; +Cc: Linux ACPI Mailing List
Status 5 from ACPICA is AE_NOT_FOUND.
_OSC is an optional control method, so whatever code is squawking about it probably handle it and shut up.
-----Original Message-----
From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Udo A. Steinberg
Sent: Friday, April 27, 2007 5:08 AM
To: Linux Kernel Mailing List
Cc: Linux ACPI Mailing List
Subject: ACPI interpreter errors
Hello,
With 2.6.21 I am getting the following errors from the ACPI interpreter on an
Intel S5000PSL board:
Allocate Port Service[0000:02:02.0:pcie20]
Allocate Port Service[0000:02:02.0:pcie21]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:02.0:pcie01 failed with error 2
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:03.0:pcie01 failed with error 1
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:04.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:05.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:06.0:pcie01 failed with error 2
aer_init: AER service init fails - No ACPI _OSC support
aer: probe of 0000:00:07.0:pcie01 failed with error 1
The complete dmesg output is attached. If you need more information, please let
me know.
Cheers,
- Udo
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ACPI interpreter errors (aer_init)
2007-04-27 18:05 ` Moore, Robert
@ 2007-04-28 6:31 ` Len Brown
2007-04-30 0:40 ` Dave Jones
0 siblings, 1 reply; 4+ messages in thread
From: Len Brown @ 2007-04-28 6:31 UTC (permalink / raw)
To: Moore, Robert, Zhang, Yanmin
Cc: Udo A. Steinberg, Linux Kernel Mailing List,
Linux ACPI Mailing List
On Friday 27 April 2007 14:05, Moore, Robert wrote:
> Status 5 from ACPICA is AE_NOT_FOUND.
>
> _OSC is an optional control method, so whatever code is squawking about it probably handle it and shut up.
>
>
> -----Original Message-----
> From: linux-acpi-owner@vger.kernel.org [mailto:linux-acpi-owner@vger.kernel.org] On Behalf Of Udo A. Steinberg
> Sent: Friday, April 27, 2007 5:08 AM
> To: Linux Kernel Mailing List
> Cc: Linux ACPI Mailing List
> Subject: ACPI interpreter errors
>
> Hello,
>
> With 2.6.21 I am getting the following errors from the ACPI interpreter on an
> Intel S5000PSL board:
>
> Allocate Port Service[0000:02:02.0:pcie20]
> Allocate Port Service[0000:02:02.0:pcie21]
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:02.0:pcie01 failed with error 2
> aer_init: AER service init fails - No ACPI _OSC support
> aer: probe of 0000:00:03.0:pcie01 failed with error 1
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:04.0:pcie01 failed with error 2
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:05.0:pcie01 failed with error 2
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:06.0:pcie01 failed with error 2
> aer_init: AER service init fails - No ACPI _OSC support
> aer: probe of 0000:00:07.0:pcie01 failed with error 1
>
> The complete dmesg output is attached. If you need more information, please let
> me know.
On a quick glance, it appears that these messages have been in the aer driver
since it was born.
Did you run with CONFIG_PCIEAER in 2.6.19 or 2.6.20 and not have them there?
I agree with Bob, as status 5 is AE_NOT_FOUND,
it appears that the driver is being overly verbose,
even though these appear to all be KERN_DEBUG messages.
-Len
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ACPI interpreter errors (aer_init)
2007-04-28 6:31 ` ACPI interpreter errors (aer_init) Len Brown
@ 2007-04-30 0:40 ` Dave Jones
0 siblings, 0 replies; 4+ messages in thread
From: Dave Jones @ 2007-04-30 0:40 UTC (permalink / raw)
To: Len Brown
Cc: Moore, Robert, Zhang, Yanmin, Udo A. Steinberg,
Linux Kernel Mailing List, Linux ACPI Mailing List
On Sat, Apr 28, 2007 at 02:31:52AM -0400, Len Brown wrote:
> On a quick glance, it appears that these messages have been in the aer driver
> since it was born.
> Did you run with CONFIG_PCIEAER in 2.6.19 or 2.6.20 and not have them there?
>
> I agree with Bob, as status 5 is AE_NOT_FOUND,
> it appears that the driver is being overly verbose,
> even though these appear to all be KERN_DEBUG messages.
See this thread..
From: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: lenb@kernel.org, us15@os.inf.tu-dresden.de, gregkh@suse.de, davej@redhat.com
Subject: [PATCH] reduce AER init error information
for a patch resolving this.
Dave
--
http://www.codemonkey.org.uk
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-04-30 0:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-27 12:07 ACPI interpreter errors Udo A. Steinberg
2007-04-27 18:05 ` Moore, Robert
2007-04-28 6:31 ` ACPI interpreter errors (aer_init) Len Brown
2007-04-30 0:40 ` Dave Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox