From: Olaf Hering <olh@suse.de>
To: "Kristian Høgsberg" <krh@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
Stefan Richter <stefanr@s5r6.in-berlin.de>,
linux1394-devel <linux1394-devel@lists.sourceforge.net>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [git pull] New firewire stack
Date: Wed, 2 May 2007 22:03:02 +0200 [thread overview]
Message-ID: <20070502200302.GA7331@suse.de> (raw)
In-Reply-To: <4638EC24.2020703@redhat.com>
On Wed, May 02, Kristian Høgsberg wrote:
> Olaf Hering wrote:
> >On Tue, May 01, Kristian Høgsberg wrote:
> >
> >> drivers/firewire/Kconfig | 60 ++
> >
> >NACK.
> >Upgrade the current drivers/ieee1394/ with the new code, and keep all
> >existing module names.
>
> What's your reasoning here?
Whats the upgrade path for root on sbp2?
Right now mkinitrd puts 'ohci1394 spb2' into the initrd because both
names are stored in a config file. How does one configure that config
file to have a setup that works with kernels which provide only
drivers/ieee1394 and a newer ones which provide only drivers/firewire?
next prev parent reply other threads:[~2007-05-02 20:03 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-01 20:27 [git pull] New firewire stack Kristian Høgsberg
2007-05-01 21:34 ` Stefan Richter
2007-05-02 9:00 ` Christoph Hellwig
2007-05-02 12:13 ` Stefan Richter
2007-05-02 12:15 ` [PATCH 1/6] firewire: handling of cards, buses, nodes Stefan Richter
2007-05-02 12:16 ` [PATCH 2/6] firewire: isochronous and asynchronous I/O Stefan Richter
2007-05-02 12:17 ` [PATCH 3/6] firewire: char device interface Stefan Richter
2007-05-02 12:18 ` [PATCH 4/6] firewire: OHCI-1394 lowlevel driver Stefan Richter
2007-05-02 12:18 ` [PATCH 5/6] firewire: SBP-2 highlevel driver Stefan Richter
2007-05-02 12:19 ` [PATCH 6/6] firewire: add it all to kbuild Stefan Richter
2007-05-02 18:05 ` Stefan Richter
2007-05-02 19:44 ` Christoph Hellwig
2007-05-02 23:01 ` Stefan Richter
2007-05-03 4:15 ` Sam Ravnborg
2007-05-03 8:10 ` Christoph Hellwig
2007-05-08 0:14 ` Kristian Høgsberg
2007-05-02 19:44 ` [PATCH 5/6] firewire: SBP-2 highlevel driver Christoph Hellwig
2007-05-02 21:53 ` Stefan Richter
2007-05-02 22:10 ` Stefan Richter
2007-05-04 9:53 ` Christoph Hellwig
2007-05-04 11:20 ` Stefan Richter
2007-05-09 21:05 ` Kristian Høgsberg
2007-05-09 21:48 ` Stefan Richter
2007-05-09 21:57 ` Stefan Richter
2007-05-09 22:13 ` Kristian Høgsberg
2007-05-09 22:56 ` Stefan Richter
2007-05-04 11:11 ` [PATCH 4/6] firewire: OHCI-1394 lowlevel driver Christoph Hellwig
2007-05-09 23:40 ` Kristian Høgsberg
2007-05-02 15:35 ` [PATCH 3/6] firewire: char device interface John Stoffel
2007-05-02 16:06 ` Stefan Richter
2007-05-02 21:11 ` Kristian Høgsberg
2007-05-04 9:48 ` Christoph Hellwig
2007-05-08 0:19 ` Kristian Høgsberg
2007-05-02 19:30 ` Christoph Hellwig
2007-05-08 0:08 ` Kristian Høgsberg
2007-05-02 19:29 ` [PATCH 2/6] firewire: isochronous and asynchronous I/O Christoph Hellwig
2007-05-03 0:08 ` Kristian Høgsberg
2007-05-03 8:54 ` Stefan Richter
2007-05-02 15:55 ` [PATCH 1/6] firewire: handling of cards, buses, nodes Pekka Enberg
2007-05-02 19:16 ` Stefan Richter
2007-05-02 20:35 ` Pekka Enberg
2007-05-07 22:02 ` Kristian Høgsberg
2007-05-02 21:16 ` Kristian Høgsberg
2007-05-02 19:22 ` Christoph Hellwig
2007-05-07 23:42 ` Kristian Høgsberg
2007-05-02 20:00 ` [git pull] New firewire stack Kristian Høgsberg
2007-05-02 12:21 ` Olaf Hering
2007-05-02 12:48 ` Stefan Richter
2007-05-02 13:56 ` Gene Heskett
2007-05-02 18:51 ` Stefan Richter
2007-05-02 15:27 ` Adrian Bunk
2007-05-02 20:03 ` Kristian Høgsberg
2007-05-02 19:53 ` Kristian Høgsberg
2007-05-02 20:03 ` Olaf Hering [this message]
2007-05-10 17:26 ` [git pull] New firewire stack (updated) Stefan Richter
2007-05-10 17:38 ` Christoph Hellwig
2007-05-10 17:51 ` Adrian Bunk
2007-05-10 17:56 ` Stefan Richter
2007-05-10 18:05 ` Stefan Richter
[not found] <mailman.197656.1178135675.32383.linux1394-devel@lists.sourceforge.net>
2007-05-03 0:04 ` [git pull] New firewire stack Jonathan Woithe
2007-05-03 8:22 ` Stefan Richter
2007-05-03 11:48 ` Olaf Hering
2007-05-03 13:30 ` Stefan Richter
2007-05-03 16:34 ` Adrian Bunk
2007-05-03 17:33 ` Kristian Høgsberg
2007-05-04 5:54 ` Bill Fink
2007-05-05 21:17 ` Olaf Hering
2007-05-08 0:28 ` Kristian Høgsberg
2007-05-03 23:07 ` Jonathan Woithe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070502200302.GA7331@suse.de \
--to=olh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=krh@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
--cc=stefanr@s5r6.in-berlin.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox