From: Andrew Morton <akpm@linux-foundation.org>
To: Andy Whitcroft <apw@shadowen.org>
Cc: gregkh@suse.de, paulus@samba.org, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org,
Christoph Lameter <clameter@engr.sgi.com>
Subject: Re: [PATCH] Re: 2.6.21-rc7-mm2 -- hvsi console driver registration failure
Date: Fri, 4 May 2007 13:09:52 -0700 [thread overview]
Message-ID: <20070504130952.b43fc676.akpm@linux-foundation.org> (raw)
In-Reply-To: <4fe4528cb20beb569a8f2ac817c776e5@pinky>
On Fri, 04 May 2007 12:38:58 +0100
Andy Whitcroft <apw@shadowen.org> wrote:
>
> Trying to get 2.6.21-rc7-mm2 to boot on large PPC64 seems to be a
> bit of a challenge. We have been seeing panics on boot from the
> hvsi driver:
>
> Couldn't register hvsi console driver
>
> Tracking this back, this seems to come from hvsi driver trying to
> register itself via tty_register_driver() with a zero units.
>
> The failure is triggered by a change in semantics for kmalloc()
> between SLAB and SLUB; kmalloc(0) now returns NULL rather than an
> allocation at the smallest size. Looking at the code in question
> even when the allocation succeeds we will not actually use the
> memory when device->num is zero.
OK, thanks for working that out.
Christoph, we should be emitting loud warnings so that this problem is easy
to debug.
Better, we should be emitting loud warnigns which then disable themselves
and then succeeding the allocation so that people can proceed with their
kernel testing.
When all the loud-warning sites have been fixed, we can take that code out
again.
The present situation is maximally tester-hostile.
> It is not clear to me if this is a bug in the hvsi driver in that
> it should specify some units. It seems we will try and reserve zero
> devices in this case, which seems pointless.
>
> I have tested with the patch below which seems safe to me and stops
> the errors and even seems to make the console work. But perhaps
> someone with more driver fu, could verify if driver->num of zero
> has any meaning and kick this to the hvsi people if not.
>
> -apw
>
> === 8< ===
> tty_register_driver: only allocate tty instances when defined
>
> If device->num is zero we attempt to kmalloc() zero bytes.
> When SLUB is enabled this returns a null pointer and take that as
> an allocation failure and fail the device register. Check for no
> devices and avoid the allocation.
>
> Signed-off-by: Andy Whitcroft <apw@shadowen.org>
> ---
> diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
> index 959a616..71c4579 100644
> --- a/drivers/char/tty_io.c
> +++ b/drivers/char/tty_io.c
> @@ -3724,7 +3724,7 @@ int tty_register_driver(struct tty_driver *driver)
> if (driver->flags & TTY_DRIVER_INSTALLED)
> return 0;
>
> - if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
> + if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
> p = kmalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
> if (!p)
> return -ENOMEM;
next prev parent reply other threads:[~2007-05-04 20:11 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-26 5:57 2.6.21-rc7-mm2 Andrew Morton
2007-04-26 11:47 ` 2.6.21-rc7-mm2 Gabriel C
2007-04-26 20:37 ` 2.6.21-rc7-mm2 Andrew Morton
2007-04-26 20:46 ` 2.6.21-rc7-mm2 Randy Dunlap
2007-04-29 8:05 ` 2.6.21-rc7-mm2 Geert Uytterhoeven
2007-04-26 20:57 ` 2.6.21-rc7-mm2 Timur Tabi
2007-04-26 21:13 ` 2.6.21-rc7-mm2 Gabriel C
2007-04-26 21:33 ` 2.6.21-rc7-mm2 Andrew Morton
2007-04-26 12:16 ` 2.6.21-rc7-mm2 -- x86_64 VDSO compile error Andy Whitcroft
2007-04-26 13:27 ` Mel Gorman
2007-04-26 14:11 ` Andi Kleen
2007-04-26 14:31 ` Mel Gorman
2007-04-26 14:13 ` 2.6.21-rc7-mm2 -- x86_64 VDSO compile error II Andi Kleen
2007-04-26 14:39 ` Mel Gorman
2007-04-26 15:20 ` Mel Gorman
2007-04-26 15:24 ` Andi Kleen
2007-04-26 15:45 ` Mel Gorman
2007-04-27 0:39 ` Andi Kleen
2007-04-27 8:59 ` Mel Gorman
2007-04-27 15:50 ` [PATCH] Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu fix Mel Gorman
2007-04-27 16:34 ` Andi Kleen
2007-04-27 16:49 ` Mel Gorman
2007-04-26 12:30 ` 2.6.21-rc7-mm2 -- x86_64 blade hard hangs Andy Whitcroft
2007-04-26 13:51 ` Andi Kleen
2007-04-26 13:33 ` Mel Gorman
2007-04-26 14:46 ` Mel Gorman
2007-04-26 17:40 ` Mel Gorman
[not found] ` <20070426234002.GH5475@linux-os.sc.intel.com>
[not found] ` <20070427110709.GE3645@skynet.ie>
2007-04-27 17:54 ` Siddha, Suresh B
2007-04-27 23:59 ` Mel Gorman
2007-04-26 13:17 ` 2.6.21-rc7-mm2 Andy Whitcroft
2007-04-26 13:41 ` 2.6.21-rc7-mm2 -- PPC link failure Andy Whitcroft
2007-04-26 18:14 ` Andy Whitcroft
2007-04-26 18:27 ` Christoph Lameter
2007-04-26 18:40 ` Andy Whitcroft
2007-04-26 18:49 ` Christoph Lameter
2007-04-26 19:12 ` Christoph Lameter
2007-04-26 19:48 ` Andy Whitcroft
2007-04-26 20:23 ` Christoph Lameter
2007-04-27 16:55 ` Andy Whitcroft
2007-04-27 16:58 ` Christoph Lameter
2007-04-26 18:25 ` [PATCH] mm/memory.c: remove warning from an uninitialized spinlock. was: Re: 2.6.21-rc7-mm2 Borislav Petkov
2007-04-28 0:22 ` Andrew Morton
2007-04-28 0:27 ` Jeremy Fitzhardinge
2007-04-28 5:57 ` Borislav Petkov
2007-04-28 6:25 ` Borislav Petkov
2007-04-28 6:54 ` Andrew Morton
2007-04-28 7:03 ` Jeremy Fitzhardinge
2007-04-28 23:48 ` Andy Whitcroft
2007-04-29 3:25 ` Andrew Morton
2007-04-29 6:50 ` Borislav Petkov
2007-04-29 8:19 ` Andrew Morton
2007-04-29 9:24 ` Andrew Morton
2007-04-29 21:36 ` Dave Jones
2007-04-29 21:45 ` Andrew Morton
2007-11-07 19:20 ` Steven Rostedt
2007-11-08 5:15 ` Borislav Petkov
2007-04-26 23:47 ` [-mm patch] make drivers/hwmon/applesmc.c:backlight_work static Adrian Bunk
2007-04-26 23:47 ` [-mm patch] unexport highlevel_host_reset Adrian Bunk
2007-04-27 0:16 ` Stefan Richter
2007-04-27 2:31 ` 2.6.21-rc7-mm2 breaks 'lvm vgscan' Valdis.Kletnieks
2007-04-27 2:55 ` Andrew Morton
2007-05-05 18:04 ` Valdis.Kletnieks
2007-04-28 17:56 ` 2.6.21-rc7-mm2 crash: Eeek! page_mapcount(page) went negative! (-1) Tilman Schmidt
2007-04-28 21:10 ` Andrew Morton
2007-04-28 22:06 ` Hugh Dickins
2007-04-30 17:17 ` Tilman Schmidt
2007-04-30 18:21 ` Andrew Morton
2007-04-30 19:28 ` Tilman Schmidt
2007-04-30 19:46 ` Andrew Morton
2007-04-30 21:32 ` Tilman Schmidt
2007-05-01 11:26 ` Tilman Schmidt
2007-05-02 3:10 ` Greg KH
2007-05-02 7:01 ` Tilman Schmidt
2007-05-02 7:02 ` Greg KH
2007-05-02 7:10 ` Andrew Morton
2007-05-02 7:28 ` Greg KH
2007-05-02 7:43 ` Greg KH
2007-05-02 9:41 ` Tilman Schmidt
2007-05-02 22:06 ` Greg KH
2007-05-02 12:14 ` Kay Sievers
2007-05-02 7:52 ` Greg KH
2007-05-02 17:36 ` Tilman Schmidt
2007-05-02 20:07 ` Andrew Morton
2007-05-02 21:22 ` Tilman Schmidt
2007-05-02 7:10 ` Nick Piggin
2007-04-28 19:19 ` [-mm patch] make drivers/misc/thinkpad_acpi:fan_mutex static Adrian Bunk
2007-04-28 19:58 ` Henrique de Moraes Holschuh
2007-04-29 1:53 ` Len Brown
2007-04-29 2:50 ` Adrian Bunk
2007-04-29 4:09 ` Henrique de Moraes Holschuh
2007-04-28 19:19 ` [-mm patch] MMC: make tifm_sd_set_dma_data() static Adrian Bunk
2007-05-01 14:14 ` Pierre Ossman
2007-04-28 19:20 ` [-mm patch] drivers/rtc/rtc-dev.c should #include "rtc-core.h" Adrian Bunk
2007-04-28 19:20 ` [-mm patch] scsi/lpfc/lpfc_init.c: remove unused variable Adrian Bunk
2007-04-29 19:19 ` 2.6.21-rc7-mm2 Dan Kruchinin
2007-04-29 19:48 ` 2.6.21-rc7-mm2 Andrew Morton
2007-04-30 5:01 ` 2.6.21-rc7-mm2 hangs in boot Randy Dunlap
2007-04-30 5:23 ` Andrew Morton
2007-04-30 15:16 ` Randy Dunlap
2007-04-30 23:51 ` 2.6.21-rc7-mm2 hangs in boot (netconsole) Randy Dunlap
2007-05-01 0:12 ` Andrew Morton
2007-05-01 0:45 ` Randy Dunlap
2007-05-01 1:08 ` Andrew Morton
2007-05-01 3:43 ` Andi Kleen
2007-05-01 5:16 ` Randy Dunlap
2007-05-01 5:23 ` Andrew Morton
2007-05-01 6:24 ` Andi Kleen
2007-05-01 5:38 ` Andrew Morton
2007-05-01 16:15 ` Randy Dunlap
2007-05-01 6:22 ` Andi Kleen
2007-05-01 16:22 ` Randy Dunlap
2007-05-01 17:26 ` Randy Dunlap
2007-05-04 11:38 ` [PATCH] Re: 2.6.21-rc7-mm2 -- hvsi console driver registration failure Andy Whitcroft
2007-05-04 19:04 ` Linas Vepstas
2007-05-04 20:09 ` Andrew Morton [this message]
2007-05-04 21:21 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070504130952.b43fc676.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=apw@shadowen.org \
--cc=clameter@engr.sgi.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox