From: Len Brown <lenb@kernel.org>
To: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>, Chuck Ebbert <cebbert@redhat.com>,
len.brown@intel.com, Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
torvalds@linux-foundation.org
Subject: Re: 2.6.22-rc1-mm1 [cannot change thermal trip points]
Date: Thu, 17 May 2007 15:08:39 -0400 [thread overview]
Message-ID: <200705171508.40202.lenb@kernel.org> (raw)
In-Reply-To: <464C5A62.6060604@gmail.com>
On Thursday 17 May 2007 09:36, Maciej Rutecki wrote:
> Many people need change trippoints, for example I have:
>
> cat /proc/acpi/thermal_zone/TZ0/trip_points | grep critical
> critical (S5): 256 C
>
> I _must_ change it to below 105 C, or edit DSDT table (too difficult to
> me). I cannot use this kernel, when trip points are read only.
What bad things happen if you leave the critical trip point at 256?
Do you find that you can drive the temperature over 105 and
the system fails to shut down?
-Len
next prev parent reply other threads:[~2007-05-17 19:11 UTC|newest]
Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-16 3:19 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 6:06 ` 2.6.22-rc1-mm1 KAMEZAWA Hiroyuki
2007-05-16 7:58 ` 2.6.22-rc1-mm1 Jeff Garzik
2007-05-16 8:04 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 15:33 ` 2.6.22-rc1-mm1 Jeff Garzik
2007-05-16 20:24 ` 2.6.22-rc1-mm1 Darrick J. Wong
2007-05-16 16:54 ` 2.6.22-rc1-mm1 Randy Dunlap
2007-05-16 7:57 ` 2.6.22-rc1-mm1 - s390 vs. md Cornelia Huck
2007-05-16 17:21 ` Williams, Dan J
2007-05-16 10:18 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-05-16 15:16 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 17:40 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-16 17:55 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 18:18 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-05-16 18:00 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 23:32 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-16 23:36 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-17 9:35 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-29 22:34 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-01 9:50 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-01 23:12 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-06-05 18:38 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-05 22:57 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-06-07 9:49 ` 2.6.22-rc1-mm1 Andy Whitcroft
2007-06-11 13:58 ` 2.6.22-rc1-mm1 Andy Whitcroft
[not found] ` <63a08cc7547f14065becdf9a94d0d529@pinky>
2007-06-11 16:15 ` [PATCH] move the kernel to 16MB for NUMA-Q Andrew Morton
2007-06-11 17:20 ` Dave Jones
2007-06-11 17:36 ` H. Peter Anvin
2007-06-11 18:19 ` Jan Engelhardt
2007-06-11 18:46 ` Dave Jones
2007-06-11 19:17 ` Alan Cox
2007-06-11 20:07 ` Rene Herman
2007-06-11 20:21 ` Rene Herman
2007-06-11 19:01 ` H. Peter Anvin
2007-06-11 20:44 ` Jan Engelhardt
2007-06-11 20:51 ` H. Peter Anvin
2007-06-15 11:12 ` Jan Engelhardt
2007-06-11 17:49 ` Rene Herman
2007-06-11 17:58 ` H. Peter Anvin
2007-06-11 18:01 ` Rene Herman
2007-05-17 4:16 ` 2.6.22-rc1-mm1 Bharata B Rao
2007-05-18 8:54 ` 2.6.22-rc1-mm1 young dave
2007-05-18 10:07 ` 2.6.22-rc1-mm1 young dave
2007-05-18 16:54 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-18 16:59 ` 2.6.22-rc1-mm1 Mel Gorman
2007-05-21 0:53 ` 2.6.22-rc1-mm1 young dave
2007-05-21 4:49 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-21 5:00 ` 2.6.22-rc1-mm1 young dave
2007-05-21 5:03 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-21 5:39 ` 2.6.22-rc1-mm1 young dave
[not found] ` <465138CC.3060605@zytor.com>
2007-05-21 8:41 ` 2.6.22-rc1-mm1 young dave
2007-05-21 16:35 ` 2.6.22-rc1-mm1 H. Peter Anvin
2007-05-22 2:14 ` 2.6.22-rc1-mm1 young dave
[not found] ` <465319C1.2080206@zytor.com>
2007-05-23 1:15 ` 2.6.22-rc1-mm1 young dave
2007-05-16 12:10 ` (NFS) BUG: at page-writeback.c:829 [Was: 2.6.22-rc1-mm1] Jiri Slaby
2007-05-16 12:39 ` Nick Piggin
2007-05-16 12:44 ` Jiri Slaby
2007-05-16 12:47 ` Nick Piggin
2007-05-16 13:00 ` Trond Myklebust
2007-05-16 13:06 ` Nick Piggin
2007-05-16 12:52 ` Trond Myklebust
2007-05-16 14:30 ` 2.6.22-rc1-mm1 Michal Piotrowski
2007-05-16 14:37 ` 2.6.22-rc1-mm1 Nick Piggin
[not found] ` <6bffcb0e0705160935r1767a764hce72f24f9eee6c1e@mail.gmail.com>
2007-05-16 16:58 ` 2.6.22-rc1-mm1 Jiri Slaby
2007-05-16 15:34 ` 2.6.22-rc1-mm1 Gabriel C
2007-05-16 16:24 ` 2.6.22-rc1-mm1 Michal Piotrowski
2007-05-16 16:41 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-17 2:06 ` 2.6.22-rc1-mm1 David Chinner
2007-05-17 8:41 ` [xfs-masters] 2.6.22-rc1-mm1 Christoph Hellwig
2007-05-17 20:05 ` Michal Piotrowski
2007-05-18 2:11 ` David Chinner
2007-05-21 10:11 ` David Chinner
2007-05-21 10:23 ` Christoph Hellwig
2007-05-22 10:44 ` David Chinner
2007-05-22 11:42 ` Christoph Hellwig
2007-05-22 23:23 ` Nathan Scott
2007-05-22 14:45 ` Michal Piotrowski
2007-05-16 16:50 ` 2.6.22-rc1-mm1 Randy Dunlap
2007-05-16 17:00 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-16 17:06 ` 2.6.22-rc1-mm1 Andrew Morton
2007-05-16 19:55 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-16 20:00 ` 2.6.22-rc1-mm1 Richard Purdie
2007-05-18 17:34 ` 2.6.22-rc1-mm1 Edward Shishkin
2007-05-16 17:37 ` 2.6.22-rc1-mm1 [cannot change thermal trip points] Maciej Rutecki
2007-05-16 17:47 ` Chuck Ebbert
2007-05-16 18:10 ` Goulven Guillard
2007-05-17 9:23 ` Pavel Machek
2007-05-17 13:36 ` Maciej Rutecki
2007-05-17 19:08 ` Len Brown [this message]
2007-05-17 20:09 ` Maciej Rutecki
2007-05-17 20:42 ` Maciej Rutecki
2007-05-17 21:53 ` Pavel Machek
2007-05-17 22:42 ` Len Brown
2007-05-21 12:11 ` Pavel Machek
2007-06-01 2:46 ` Len Brown
2007-06-04 11:16 ` Pavel Machek
2007-05-17 19:17 ` Len Brown
2007-05-17 21:52 ` Pavel Machek
2007-05-17 22:35 ` Len Brown
2007-06-04 9:02 ` Stefan Seyfried
2007-06-04 11:06 ` Pavel Machek
2007-05-19 19:56 ` Thomas Renninger
2007-05-21 3:50 ` Len Brown
2007-05-21 11:31 ` Thomas Renninger
2007-05-21 12:10 ` Pavel Machek
2007-05-21 13:27 ` Matthew Garrett
2007-05-21 13:29 ` Pavel Machek
2007-05-21 13:36 ` Matthew Garrett
2007-05-21 13:40 ` Pavel Machek
2007-05-21 13:45 ` Matthew Garrett
2007-05-21 22:42 ` Pavel Machek
2007-05-22 0:31 ` Matthew Garrett
2007-05-22 9:06 ` Pavel Machek
2007-05-22 9:16 ` Matthew Garrett
2007-05-22 9:28 ` Goulven Guillard
2007-05-22 10:05 ` Maciej Rutecki
2007-06-04 9:13 ` Stefan Seyfried
2007-05-24 14:16 ` 2.6.22-rc1-mm1 Implementing fan/thermal control in userspace - Was: " Thomas Renninger
2007-05-24 14:36 ` Matthew Garrett
2007-05-24 18:18 ` Thomas Renninger
2007-05-25 6:38 ` Pavel Machek
2007-05-27 21:51 ` Matthew Garrett
2007-05-28 10:58 ` Pavel Machek
2007-05-28 12:50 ` Matthew Garrett
2007-05-28 12:53 ` Pavel Machek
2007-05-16 18:55 ` 2.6.22-rc1-mm1: IDE compile error Adrian Bunk
2007-05-23 23:45 ` Bartlomiej Zolnierkiewicz
2007-05-24 10:55 ` Alan Cox
2007-05-24 18:53 ` H. Peter Anvin
2007-05-25 0:05 ` H. Peter Anvin
2007-05-25 0:14 ` Alan Cox
2007-05-25 0:18 ` H. Peter Anvin
2007-05-25 0:38 ` Alan Cox
2007-05-25 0:51 ` H. Peter Anvin
2007-05-25 14:19 ` Alan Cox
2007-05-17 12:38 ` 2.6.22-rc1-mm1 - Call trace in slub_def.h Reuben Farrelly
2007-05-17 12:52 ` Satyam Sharma
2007-05-20 10:12 ` 2.6.22-rc1-mm1 Mariusz Kozlowski
2007-05-20 10:21 ` 2.6.22-rc1-mm1 Sam Ravnborg
2007-05-20 15:33 ` 2.6.22-rc1-mm1 Kumar Gala
2007-05-22 7:25 ` 2.6.22-rc1-mm1: evm BUG when reading sysfs file Joseph Fannin
2007-05-22 21:23 ` Andrew Morton
2007-05-25 21:05 ` Mimi Zohar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200705171508.40202.lenb@kernel.org \
--to=lenb@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cebbert@redhat.com \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.rutecki@gmail.com \
--cc=pavel@ucw.cz \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).