Re: HPT366 not enabled by kernel 2.6.21.2

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

[ adding linux-ide ML and Sergei to cc: ]

Hi,

On Thursday 24 May 2007, Pascal Schmidt wrote:
> 
> Hello!
> 
> I recently upgraded my kernel to 2.6.21 (.1 and .2 with identical
> results) and my second IDE controller, a HPT366 on a PCI card,
> doesn't get enabled any more. The latest previous kernel I used was
> 2.6.19.7, where the HPT366 worked.
> 
> Here's the HPT366 part of the 2.6.21.2 dmesg:
> 
> HPT366: IDE controller at PCI slot 0000:02:0a.0
> ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
> HPT366: chipset revision 1
> HPT366: using 33 MHz PCI clock
> HPT366: 100% native mode on irq 18
> HPT366: neither IDE port enabled (BIOS)
> ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 18 (level, low) -> IRQ 18
> HPT366: using 33 MHz PCI clock
> HPT366: neither IDE port enabled (BIOS)
> 
> There is a flash disk connected to the primary channel (master)
> which also shows up in the controller's BIOS screen, so I don't
> think it's true that both ports are disabled.
> 
> Under 2.6.17.9 the "neither IDE port enabled" message doesn't
> happen and hde gets detected.

The fix from Sergei (queued for 2.6.21.3) is here:

http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git;a=blob_plain;f=queue-2.6.21/hpt366-don-t-check-enablebits-for-hpt36x.patch;h=0833e0a37e23ed103a18ca93684201e1cb94a0a9

[ it has already been merged into 2.6.22 tree ]

Thanks,
Bart