No sound from Lenovo 3000 N100

[Silla Rizzoli <biker@ngi.it>]

[-- Attachment #1: Type: text/plain, Size: 1264 bytes --]

I've just tried 2.6.22-rc4 and sound doesn't work. It has never worked before, 
unless I disable ACPI.

dmesg (ALSA debug messages are enabled):
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_intel.c:695: codec_mask = 0x3
ALSA sound/pci/hda/hda_codec.c:1732: hda_codec: model '3stack' is selected
ALSA sound/pci/hda/patch_si3054.c:245: si3054: cannot initialize. EXT MID = 
0000
ALSA sound/pci/hda/patch_si3054.c:257: Link Frame Detect(FDT) is not ready 
(line status: 0000)


lspci -v:

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
        Subsystem: Lenovo Unknown device 2066
        Flags: bus master, fast devsel, latency 0, IRQ 21
        Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 
Enable-
        Capabilities: [70] Express Unknown type IRQ 0
        Capabilities: [100] Virtual Channel
        Capabilities: [130] Unknown (5)

.config attached


Any help is greatly appreciated.

Best regards,
Silla

[-- Attachment #2: config.gz --]
[-- Type: application/x-gzip, Size: 13033 bytes --]