From: Andrey Borzenkov <arvidjaar@mail.ru>
To: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>,
"Samuel Ortiz" <samuel@sortiz.org>,
linux-kernel@vger.kernel.org,
"Michal Piotrowski" <michal.k.k.piotrowski@gmail.com>,
ambx1@neo.rr.com
Subject: Re: 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip
Date: Sun, 10 Jun 2007 12:03:03 +0400 [thread overview]
Message-ID: <200706101203.04649.arvidjaar@mail.ru> (raw)
In-Reply-To: <200706071234.47517.bjorn.helgaas@hp.com>
[-- Attachment #1: Type: text/plain, Size: 1840 bytes --]
On Thursday 07 June 2007, Bjorn Helgaas wrote:
> On Wednesday 06 June 2007 02:45:01 pm Andrey Borzenkov wrote:
> > I am beginning to doubt whether drier
> > works on my system at all (i.e. before PnP change); have to find time to
> > test.
>
> In 2.6.21, smsc-ircc2 at least found the device. So we definitely have
> a problem because in 2.6.22-rc, we don't find the device.
>
> What laptop do you have? Maybe I can find one to play with.
>
> I think Windows always calls _SRS, even if it doesn't need to change
> the current resource settings. Linux doesn't do that, and my HP nw8240
> firmware has a bug that leaves the IR device partly-enabled until _SRS
> is called. Maybe yours has a similar bug.
>
> Can you set CONFIG_ACPI_DEBUG=y, make it so smsc-ircc2 isn't loaded
> automatically, and try this (along with my previous patch to swap
> FIR and SIR):
>
> # dmesg -n 8
> # echo 0x200 > /sys/module/acpi/parameters/debug_level
> # echo disable > /sys/bus/pnp/devices/00:0a/resources
> # echo activate > /sys/bus/pnp/devices/00:0a/resources
> # modprobe smsc-ircc2
>
> If you try this, can you collect the whole dmesg log?
>
well, dmesg (/var/log/messages) is around 35MB :) Even bz2 compressed it is
over 700KB. I put it here:
http://dump.ru:80/loadfile.php?filename=fir_acpi_debug.bz2&id=379192
This is from /var/log/messages. I do not have serial console and cannot
capture output directly; I can only hope nothing is lost at this rate.
> It's also possible that some other driver like i2c is messing with
> the ISA/LPC bridge configuration and breaking the IR device config.
> Your lspnp output doesn't show any other ISA devices down there,
> but I know i2c likes to poke around and discover things that kinda,
> sorta work, but the BIOS didn't expose.
>
> Bjorn
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2007-06-10 8:03 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-03 8:00 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip Andrey Borzenkov
2007-06-03 8:16 ` Andrey Borzenkov
2007-06-03 23:10 ` Samuel Ortiz
2007-06-04 2:33 ` Andrey Borzenkov
2007-06-04 20:44 ` Samuel Ortiz
2007-06-05 3:10 ` Andrey Borzenkov
2007-06-05 7:18 ` Linus Walleij (LD/EAB)
2007-06-05 7:57 ` Samuel Ortiz
2007-06-05 11:57 ` Linus Walleij (LD/EAB)
2007-06-05 13:04 ` Samuel Ortiz
2007-06-05 23:23 ` Bjorn Helgaas
2007-06-06 3:29 ` Andrey Borzenkov
2007-06-06 19:09 ` Bjorn Helgaas
2007-06-06 20:45 ` Andrey Borzenkov
2007-06-07 15:52 ` Bjorn Helgaas
2007-06-07 20:47 ` Samuel Ortiz
2007-06-10 6:47 ` Andrey Borzenkov
2007-06-10 21:03 ` Bjorn Helgaas
2007-06-11 14:04 ` Andrey Borzenkov
2007-06-14 21:30 ` Bjorn Helgaas
2007-06-15 13:44 ` Andrey Borzenkov
2007-06-15 15:19 ` Bjorn Helgaas
2007-06-16 16:38 ` Andrey Borzenkov
2007-06-19 23:31 ` Bjorn Helgaas
2007-06-28 3:56 ` Bjorn Helgaas
2007-06-30 2:41 ` Bjorn Helgaas
2007-06-30 7:16 ` Andrey Borzenkov
2007-06-30 11:45 ` Bjorn Helgaas
2007-06-30 14:47 ` Andrey Borzenkov
2007-06-30 21:13 ` Andrey Borzenkov
2007-07-01 3:30 ` Bjorn Helgaas
2007-07-01 7:08 ` Andrey Borzenkov
2007-07-01 13:57 ` Bjorn Helgaas
2007-08-11 18:39 ` Andrey Borzenkov
2007-08-13 16:09 ` Bjorn Helgaas
2007-08-13 17:39 ` Peter Stuge
2007-08-18 6:59 ` Andrey Borzenkov
2007-07-01 0:01 ` Michal Piotrowski
2007-07-01 0:04 ` Michal Piotrowski
2007-06-07 18:34 ` Bjorn Helgaas
2007-06-08 5:24 ` Andrey Borzenkov
2007-06-10 8:03 ` Andrey Borzenkov [this message]
2007-06-10 20:04 ` Bjorn Helgaas
2007-06-07 12:23 ` Linus Walleij (LD/EAB)
2007-06-07 15:44 ` Bjorn Helgaas
2007-06-05 12:06 ` Linus Walleij (LD/EAB)
2007-06-04 16:34 ` Bjorn Helgaas
2007-06-05 3:08 ` Andrey Borzenkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706101203.04649.arvidjaar@mail.ru \
--to=arvidjaar@mail.ru \
--cc=ambx1@neo.rr.com \
--cc=bjorn.helgaas@hp.com \
--cc=linus.walleij@ericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.k.k.piotrowski@gmail.com \
--cc=samuel@sortiz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox