From: Ondrej Zary <linux@rainbow-software.org>
To: daniel.ritz@gmx.ch
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Fix broken ifdefs in usbtouchscreen
Date: Mon, 11 Jun 2007 17:09:50 +0200 [thread overview]
Message-ID: <200706111709.50605.linux@rainbow-software.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 217 bytes --]
Hello,
this patch fixes ifdefs in usbtouchscreen that got broken by Kconfig changes,
resulting in non-working module with empty device table.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
--
Ondrej Zary
[-- Attachment #2: usbtouchscreen-ifdef.patch --]
[-- Type: text/x-diff, Size: 5261 bytes --]
--- linux-2.6.22-rc4-orig/drivers/input/touchscreen/usbtouchscreen.c 2007-06-05 02:57:25.000000000 +0200
+++ linux-2.6.22-rc4/drivers/input/touchscreen/usbtouchscreen.c 2007-06-11 14:07:40.000000000 +0200
@@ -91,7 +91,7 @@
};
-#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
+#if defined(CONFIG_TOUCHSCREEN_USB_EGALAX) || defined(CONFIG_TOUCHSCREEN_USB_ETURBO)
#define MULTI_PACKET
#endif
@@ -113,7 +113,7 @@
};
static struct usb_device_id usbtouch_devices[] = {
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
@@ -123,30 +123,30 @@
{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
#endif
@@ -158,7 +158,7 @@
* eGalax part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
#define EGALAX_PKT_TYPE_MASK 0xFE
#define EGALAX_PKT_TYPE_REPT 0x80
@@ -197,7 +197,7 @@
/*****************************************************************************
* PanJit Part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
@@ -212,7 +212,7 @@
/*****************************************************************************
* 3M/Microtouch Part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
#define MTOUCHUSB_ASYNC_REPORT 1
#define MTOUCHUSB_RESET 7
@@ -262,7 +262,7 @@
/*****************************************************************************
* ITM Part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
int touch;
@@ -296,7 +296,7 @@
/*****************************************************************************
* eTurboTouch part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
unsigned int shift;
@@ -327,7 +327,7 @@
/*****************************************************************************
* Gunze part
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
@@ -348,7 +348,7 @@
* http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
* http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
*/
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
/* supported data rates. currently using 130 */
#define TSC10_RATE_POINT 0x50
@@ -419,7 +419,7 @@
* the different device descriptors
*/
static struct usbtouch_device_info usbtouch_dev_info[] = {
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
[DEVTYPE_EGALAX] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
@@ -433,7 +433,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
[DEVTYPE_PANJIT] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
@@ -444,7 +444,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
[DEVTYPE_3M] = {
.min_xc = 0x0,
.max_xc = 0x4000,
@@ -456,7 +456,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
[DEVTYPE_ITM] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
@@ -468,7 +468,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
[DEVTYPE_ETURBO] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
@@ -482,7 +482,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
[DEVTYPE_GUNZE] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
@@ -493,7 +493,7 @@
},
#endif
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
[DEVTYPE_DMC_TSC10] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
next reply other threads:[~2007-06-11 15:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-11 15:09 Ondrej Zary [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-06-11 16:41 Fwd: [PATCH] Fix broken ifdefs in usbtouchscreen Daniel Ritz
2007-06-11 16:53 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200706111709.50605.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=daniel.ritz@gmx.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox