From: "Robert Richter" <robert.richter@amd.com>
To: "Stephane Eranian" <eranian@hpl.hp.com>
Cc: "Andi Kleen" <andi@firstfloor.org>, linux-kernel@vger.kernel.org
Subject: [patch 2/8] 2.6.22-rc3 perfmon2 : IBS implementation for AMD64
Date: Fri, 15 Jun 2007 18:58:11 +0200 [thread overview]
Message-ID: <20070615093330.944272000@localhost> (raw)
In-Reply-To: 20070614215818.509851000@localhost
Debug messages added for better debugging.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Index: linux-2.6.22-rc3/perfmon/perfmon_file.c
===================================================================
--- linux-2.6.22-rc3.orig/perfmon/perfmon_file.c
+++ linux-2.6.22-rc3/perfmon/perfmon_file.c
@@ -192,6 +192,8 @@ static int pfm_mmap(struct file *file, s
unsigned long flags;
int ret;
+ PFM_DBG("pfm_file_ops");
+
ctx = file->private_data;
size = (vma->vm_end - vma->vm_start);
@@ -332,6 +334,8 @@ static ssize_t pfm_read(struct file *fil
union pfarg_msg msg_buf;
int non_block, ret;
+ PFM_DBG("pfm_file_ops");
+
ctx = filp->private_data;
if (ctx == NULL) {
PFM_ERR("no ctx for pfm_read");
@@ -375,6 +379,8 @@ static unsigned int pfm_poll(struct file
unsigned long flags;
unsigned int mask = 0;
+ PFM_DBG("pfm_file_ops");
+
if (filp->f_op != &pfm_file_ops) {
PFM_ERR("pfm_poll bad magic");
return 0;
@@ -449,6 +455,8 @@ static int pfm_fasync(int fd, struct fil
struct pfm_context *ctx;
int ret;
+ PFM_DBG("pfm_file_ops");
+
ctx = filp->private_data;
if (ctx == NULL) {
PFM_ERR("pfm_fasync no ctx");
@@ -611,6 +619,8 @@ static int pfm_close(struct inode *inode
{
struct pfm_context *ctx;
+ PFM_DBG("pfm_file_ops");
+
ctx = filp->private_data;
if (ctx == NULL) {
PFM_ERR("no ctx");
@@ -621,6 +631,8 @@ static int pfm_close(struct inode *inode
static int pfm_no_open(struct inode *irrelevant, struct file *dontcare)
{
+ PFM_DBG("pfm_file_ops");
+
return -ENXIO;
}
@@ -637,6 +649,8 @@ static int pfm_flush(struct file *filp,
{
struct pfm_context *ctx;
+ PFM_DBG("pfm_file_ops");
+
ctx = filp->private_data;
if (ctx == NULL) {
PFM_ERR("pfm_flush no ctx");
Index: linux-2.6.22-rc3/perfmon/perfmon_syscalls.c
===================================================================
--- linux-2.6.22-rc3.orig/perfmon/perfmon_syscalls.c
+++ linux-2.6.22-rc3/perfmon/perfmon_syscalls.c
@@ -403,6 +403,8 @@ asmlinkage long sys_pfm_create_context(s
void *fmt_arg = NULL;
int ret;
+ PFM_DBG("syscall");
+
if (atomic_read(&perfmon_disabled))
return -ENOSYS;
@@ -433,8 +435,12 @@ asmlinkage long sys_pfm_write_pmcs(int f
size_t sz;
int ret, fput_needed;
- if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq))
+ PFM_DBG("syscall");
+
+ if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq)) {
+ PFM_DBG("invalid arg count %d", count);
return -EINVAL;
+ }
sz = count*sizeof(*ureq);
@@ -475,6 +481,8 @@ asmlinkage long sys_pfm_write_pmcs(int f
kfree(fptr);
error:
fput_light(filp, fput_needed);
+ if (ret)
+ PFM_DBG("failed: errno=%d", -ret);
return ret;
}
@@ -490,6 +498,8 @@ asmlinkage long sys_pfm_write_pmds(int f
size_t sz;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq))
return -EINVAL;
@@ -543,6 +553,8 @@ asmlinkage long sys_pfm_read_pmds(int fd
size_t sz;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq))
return -EINVAL;
@@ -591,6 +603,8 @@ asmlinkage long sys_pfm_restart(int fd)
unsigned long flags;
int ret, fput_needed, complete_needed;
+ PFM_DBG("syscall");
+
filp = fget_light(fd, &fput_needed);
if (unlikely(filp == NULL)) {
PFM_DBG("invalid fd %d", fd);
@@ -647,6 +661,8 @@ asmlinkage long sys_pfm_stop(int fd)
unsigned long flags;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
filp = fget_light(fd, &fput_needed);
if (unlikely(filp == NULL)) {
PFM_DBG("invalid fd %d", fd);
@@ -682,6 +698,8 @@ asmlinkage long sys_pfm_start(int fd, st
unsigned long flags;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
filp = fget_light(fd, &fput_needed);
if (unlikely(filp == NULL)) {
PFM_DBG("invalid fd %d", fd);
@@ -724,6 +742,8 @@ asmlinkage long sys_pfm_load_context(int
struct pfarg_load req;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
if (copy_from_user(&req, ureq, sizeof(req)))
return -EFAULT;
@@ -792,6 +812,8 @@ asmlinkage long sys_pfm_unload_context(i
int is_system, can_release = 0;
u32 cpu;
+ PFM_DBG("syscall");
+
filp = fget_light(fd, &fput_needed);
if (unlikely(filp == NULL)) {
PFM_DBG("invalid fd %d", fd);
@@ -834,6 +856,8 @@ asmlinkage long sys_pfm_create_evtsets(i
size_t sz;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq))
return -EINVAL;
@@ -890,6 +914,8 @@ asmlinkage long sys_pfm_getinfo_evtsets
size_t sz;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq))
return -EINVAL;
@@ -932,6 +958,8 @@ asmlinkage long sys_pfm_getinfo_evtsets
kfree(fptr);
error:
fput_light(filp, fput_needed);
+ if (ret)
+ PFM_DBG("failed: errno=%d", -ret);
return ret;
}
@@ -945,6 +973,8 @@ asmlinkage long sys_pfm_delete_evtsets(i
size_t sz;
int ret, fput_needed;
+ PFM_DBG("syscall");
+
if (count < 0 || count >= PFM_MAX_ARG_COUNT(ureq))
return -EINVAL;
Index: linux-2.6.22-rc3/perfmon/perfmon_rw.c
===================================================================
--- linux-2.6.22-rc3.orig/perfmon/perfmon_rw.c
+++ linux-2.6.22-rc3/perfmon/perfmon_rw.c
@@ -474,7 +474,7 @@ int __pfm_write_pmcs(struct pfm_context
return 0;
error:
pfm_retflag_set(req->reg_flags, error_code);
- PFM_DBG("set%u pmc%u error=%d", set_id, cnum, error_code);
+ PFM_DBG("set%u pmc%u error=0x%08x", set_id, cnum, error_code);
return ret;
}
Index: linux-2.6.22-rc3/include/asm-i386/perfmon.h
===================================================================
--- linux-2.6.22-rc3.orig/include/asm-i386/perfmon.h
+++ linux-2.6.22-rc3/include/asm-i386/perfmon.h
@@ -140,6 +140,10 @@ static inline void pfm_arch_write_pmc(st
if (ctx && ctx->flags.started == 0)
return;
+ PFM_DBG_ovfl("pfm_arch_write_pmc(0x%016Lx, 0x%016Lx)",
+ (unsigned long long) pfm_pmu_conf->pmc_desc[cnum].hw_addr,
+ (unsigned long long) value);
+ BUG_ON(pfm_pmu_conf->pmc_desc[cnum].type & PFM_REG_V);
if (arch_info->pmu_style == PFM_X86_PMU_P4)
__pfm_write_reg_p4(&arch_info->pmc_addrs[cnum], value);
else
@@ -155,6 +159,10 @@ static inline void pfm_arch_write_pmd(st
if (pfm_pmu_conf->pmd_desc[cnum].type & PFM_REG_C64)
value |= ~pfm_pmu_conf->ovfl_mask;
+ PFM_DBG_ovfl("pfm_arch_write_pmd(0x%016Lx, 0x%016Lx)",
+ (unsigned long long) pfm_pmu_conf->pmd_desc[cnum].hw_addr,
+ (unsigned long long) value);
+ BUG_ON(pfm_pmu_conf->pmd_desc[cnum].type & PFM_REG_V);
if (arch_info->pmu_style == PFM_X86_PMU_P4)
__pfm_write_reg_p4(&arch_info->pmd_addrs[cnum], value);
else
@@ -165,10 +173,14 @@ static inline u64 pfm_arch_read_pmd(stru
{
struct pfm_arch_pmu_info *arch_info = pfm_pmu_conf->arch_info;
u64 tmp;
+ BUG_ON(pfm_pmu_conf->pmd_desc[cnum].type & PFM_REG_V);
if (arch_info->pmu_style == PFM_X86_PMU_P4)
__pfm_read_reg_p4(&arch_info->pmd_addrs[cnum], &tmp);
else
rdmsrl(pfm_pmu_conf->pmd_desc[cnum].hw_addr, tmp);
+ PFM_DBG_ovfl("pfm_arch_read_pmd(0x%016Lx) = 0x%016Lx",
+ (unsigned long long) pfm_pmu_conf->pmd_desc[cnum].hw_addr,
+ (unsigned long long) tmp);
return tmp;
}
@@ -176,10 +188,14 @@ static inline u64 pfm_arch_read_pmc(stru
{
struct pfm_arch_pmu_info *arch_info = pfm_pmu_conf->arch_info;
u64 tmp;
+ BUG_ON(pfm_pmu_conf->pmc_desc[cnum].type & PFM_REG_V);
if (arch_info->pmu_style == PFM_X86_PMU_P4)
__pfm_read_reg_p4(&arch_info->pmc_addrs[cnum], &tmp);
else
rdmsrl(pfm_pmu_conf->pmc_desc[cnum].hw_addr, tmp);
+ PFM_DBG_ovfl("pfm_arch_read_pmc(0x%016Lx) = 0x%016Lx",
+ (unsigned long long) pfm_pmu_conf->pmc_desc[cnum].hw_addr,
+ (unsigned long long) tmp);
return tmp;
}
Index: linux-2.6.22-rc3/perfmon/perfmon.c
===================================================================
--- linux-2.6.22-rc3.orig/perfmon/perfmon.c
+++ linux-2.6.22-rc3/perfmon/perfmon.c
@@ -865,7 +865,8 @@ int __init pfm_init(void)
{
int ret;
- PFM_LOG("version %u.%u", PFM_VERSION_MAJ, PFM_VERSION_MIN);
+ PFM_LOG("version %u.%u, compiled: " __DATE__ ", " __TIME__,
+ PFM_VERSION_MAJ, PFM_VERSION_MIN);
pfm_ctx_cachep = kmem_cache_create("pfm_context",
sizeof(struct pfm_context)+PFM_ARCH_CTX_SIZE,
Index: linux-2.6.22-rc3/perfmon/perfmon_intr.c
===================================================================
--- linux-2.6.22-rc3.orig/perfmon/perfmon_intr.c
+++ linux-2.6.22-rc3/perfmon/perfmon_intr.c
@@ -170,6 +170,7 @@ static void pfm_overflow_handler(struct
* check for overflow condition
*/
if (likely(old_val > new_val)) {
+ PFM_DBG_ovfl("64 bit overflow of PMD%d", i);
has_64b_ovfl = 1;
if (has_ovfl_sw && ovfl_thres > 0) {
if (ovfl_thres == 1)
@@ -188,11 +189,13 @@ static void pfm_overflow_handler(struct
max_pmd);
} else {
+ PFM_DBG_ovfl("Hardware counter overflow of PMD%d=0x%04llx",
+ i, new_val);
/* only keep track of 64-bit overflows */
__clear_bit(i, ulp(pend_ovfls));
/*
- * on some PMU, it may be necessary to re-arm the PMD
- */
+ * on some PMU, it may be necessary to re-arm the PMD
+ */
pfm_arch_ovfl_reset_pmd(ctx, i);
}
--
AMD Saxony, Dresden, Germany
Operating System Research Center
email: robert.richter@amd.com
next prev parent reply other threads:[~2007-06-15 16:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-15 16:56 [patch 0/8] 2.6.22-rc3 perfmon2 : IBS implementation for AMD64 Robert Richter
2007-06-15 16:57 ` [patch 1/8] " Robert Richter
2007-06-15 18:54 ` David Rientjes
2007-06-20 18:36 ` Robert Richter
2007-06-19 12:39 ` Stephane Eranian
2007-06-15 16:58 ` Robert Richter [this message]
2007-06-19 12:39 ` [patch 2/8] " Stephane Eranian
2007-06-15 16:58 ` [patch 3/8] " Robert Richter
2007-06-19 12:40 ` Stephane Eranian
2007-06-15 16:59 ` [patch 4/8] " Robert Richter
2007-06-15 18:52 ` David Rientjes
2007-06-20 18:36 ` Robert Richter
2007-06-19 13:34 ` Stephane Eranian
2007-06-15 17:00 ` [patch 5/8] " Robert Richter
2007-06-15 17:00 ` [patch 6/8] " Robert Richter
2007-06-15 20:15 ` David Rientjes
2007-06-20 18:38 ` Robert Richter
2007-06-15 17:01 ` [patch 7/8] " Robert Richter
2007-06-15 17:02 ` [patch 8/8] " Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070615093330.944272000@localhost \
--to=robert.richter@amd.com \
--cc=andi@firstfloor.org \
--cc=eranian@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox