From: Venki Pallipadi <venkatesh.pallipadi@intel.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 5/7] ICH Force HPET: ICH5 quirk to force detect enable
Date: Fri, 22 Jun 2007 13:42:13 -0700 [thread overview]
Message-ID: <20070622204213.GE22807@linux-os.sc.intel.com> (raw)
force_enable hpet for ICH5.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
---
arch/i386/kernel/hpet.c | 2
arch/i386/kernel/quirks.c | 101 +++++++++++++++++++++++++++++++++++++++++++++-
include/asm-i386/hpet.h | 2
include/linux/pci_ids.h | 1
4 files changed, 103 insertions(+), 3 deletions(-)
Index: linux-2.6.22-rc5/arch/i386/kernel/quirks.c
===================================================================
--- linux-2.6.22-rc5.orig/arch/i386/kernel/quirks.c 2007-06-17 08:52:10.000000000 +0200
+++ linux-2.6.22-rc5/arch/i386/kernel/quirks.c 2007-06-17 08:52:10.000000000 +0200
@@ -54,9 +54,15 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
#if defined(CONFIG_HPET_TIMER)
unsigned long force_hpet_address;
+static enum {
+ NONE_FORCE_HPET_RESUME,
+ OLD_ICH_FORCE_HPET_RESUME,
+ ICH_FORCE_HPET_RESUME
+} force_hpet_resume_type;
+
static void __iomem *rcba_base;
-void ich_force_hpet_resume(void)
+static void ich_force_hpet_resume(void)
{
u32 val;
@@ -133,6 +139,7 @@ static void ich_force_enable_hpet(struct
iounmap(rcba_base);
printk(KERN_DEBUG "Failed to force enable HPET\n");
} else {
+ force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
force_hpet_address);
}
@@ -148,4 +155,96 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
ich_force_enable_hpet);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
ich_force_enable_hpet);
+
+
+static struct pci_dev *cached_dev;
+
+static void old_ich_force_hpet_resume(void)
+{
+ u32 val, gen_cntl;
+
+ if (!force_hpet_address || !cached_dev)
+ return;
+
+ pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
+ gen_cntl &= (~(0x7 << 15));
+ gen_cntl |= (0x4 << 15);
+
+ pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
+ pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
+ val = gen_cntl >> 15;
+ val &= 0x7;
+ if (val == 0x4)
+ printk(KERN_DEBUG "Force enabled HPET at resume\n");
+ else
+ BUG();
+}
+
+static void old_ich_force_enable_hpet(struct pci_dev *dev)
+{
+ u32 val, gen_cntl;
+
+ if (hpet_address || force_hpet_address)
+ return;
+
+ pci_read_config_dword(dev, 0xD0, &gen_cntl);
+ /*
+ * Bit 17 is HPET enable bit.
+ * Bit 16:15 control the HPET base address.
+ */
+ val = gen_cntl >> 15;
+ val &= 0x7;
+ if (val & 0x4) {
+ val &= 0x3;
+ force_hpet_address = 0xFED00000 | (val << 12);
+ printk(KERN_DEBUG "HPET at base address 0x%lx\n",
+ force_hpet_address);
+ cached_dev = dev;
+ return;
+ }
+
+ /*
+ * HPET is disabled. Trying enabling at FED00000 and check
+ * whether it sticks
+ */
+ gen_cntl &= (~(0x7 << 15));
+ gen_cntl |= (0x4 << 15);
+ pci_write_config_dword(dev, 0xD0, gen_cntl);
+
+ pci_read_config_dword(dev, 0xD0, &gen_cntl);
+
+ val = gen_cntl >> 15;
+ val &= 0x7;
+ if (val & 0x4) {
+ /* HPET is enabled in HPTC. Just not reported by BIOS */
+ val &= 0x3;
+ force_hpet_address = 0xFED00000 | (val << 12);
+ printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
+ force_hpet_address);
+ force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
+ return;
+ }
+
+ printk(KERN_DEBUG "Failed to force enable HPET\n");
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
+ old_ich_force_enable_hpet);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
+ old_ich_force_enable_hpet);
+
+void force_hpet_resume(void)
+{
+ switch (force_hpet_resume_type) {
+ case ICH_FORCE_HPET_RESUME:
+ return ich_force_hpet_resume();
+
+ case OLD_ICH_FORCE_HPET_RESUME:
+ return old_ich_force_hpet_resume();
+
+ default:
+ break;
+ }
+}
+
#endif
Index: linux-2.6.22-rc5/arch/i386/kernel/hpet.c
===================================================================
--- linux-2.6.22-rc5.orig/arch/i386/kernel/hpet.c 2007-06-17 08:52:10.000000000 +0200
+++ linux-2.6.22-rc5/arch/i386/kernel/hpet.c 2007-06-17 08:52:10.000000000 +0200
@@ -195,7 +195,7 @@ static void hpet_start_counter(void)
static void hpet_resume_device(void)
{
- ich_force_hpet_resume();
+ force_hpet_resume();
}
static void hpet_restart_counter(void)
Index: linux-2.6.22-rc5/include/asm-i386/hpet.h
===================================================================
--- linux-2.6.22-rc5.orig/include/asm-i386/hpet.h 2007-06-17 08:52:10.000000000 +0200
+++ linux-2.6.22-rc5/include/asm-i386/hpet.h 2007-06-17 08:52:10.000000000 +0200
@@ -73,7 +73,7 @@ extern int hpet_enable(void);
#include <asm/vsyscall.h>
#endif
-void ich_force_hpet_resume(void);
+void force_hpet_resume(void);
#ifdef CONFIG_HPET_EMULATE_RTC
Index: linux-2.6.22-rc5/include/linux/pci_ids.h
===================================================================
--- linux-2.6.22-rc5.orig/include/linux/pci_ids.h 2007-06-17 08:51:58.000000000 +0200
+++ linux-2.6.22-rc5/include/linux/pci_ids.h 2007-06-17 08:52:10.000000000 +0200
@@ -2220,6 +2220,7 @@
#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5
#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6
#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_12 0x24dc
#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd
#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1
#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2
next reply other threads:[~2007-06-22 20:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-22 20:42 Venki Pallipadi [this message]
[not found] <fa.GJG5uLURdrisg2rJw413ItLjGTg@ifi.uio.no>
2007-07-14 7:35 ` [PATCH 5/7] ICH Force HPET: ICH5 quirk to force detect enable Robert Hancock
2007-07-14 7:49 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070622204213.GE22807@linux-os.sc.intel.com \
--to=venkatesh.pallipadi@intel.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox