* [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
@ 2007-07-01 16:29 ` Matthias Kaehlcke
2007-07-03 18:09 ` Patro, Sumant
2007-07-01 16:30 ` [PATCH 2/5] use mutex instead of semaphore in Philips webcam driver Matthias Kaehlcke
` (3 subsequent siblings)
4 siblings, 1 reply; 8+ messages in thread
From: Matthias Kaehlcke @ 2007-07-01 16:29 UTC (permalink / raw)
To: megaraidlinux, linux-scsi; +Cc: linux-kernel, akpm
The Megaraid Mailbox driver uses a semaphore as mutex. Use the mutex
API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index 26e1e6c..fef9ac9 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -21,6 +21,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 04d0b69..2cecc64 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -3957,7 +3957,7 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter)
megaraid_sysfs_free_resources(adapter);
}
- sema_init(&raid_dev->sysfs_sem, 1);
+ mutex_init(&raid_dev->sysfs_mtx);
init_waitqueue_head(&raid_dev->sysfs_wait_q);
@@ -4058,7 +4058,7 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter)
/*
* Allow only one read at a time to go through the sysfs attributes
*/
- down(&raid_dev->sysfs_sem);
+ mutex_lock(&raid_dev->sysfs_mtx);
uioc = raid_dev->sysfs_uioc;
mbox64 = raid_dev->sysfs_mbox64;
@@ -4134,7 +4134,7 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter)
del_timer_sync(timerp);
- up(&raid_dev->sysfs_sem);
+ mutex_unlock(&raid_dev->sysfs_mtx);
return rval;
}
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 9de803c..626459d 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -168,7 +168,7 @@ typedef struct {
* @hw_error : set if FW not responding
* @fast_load : If set, skip physical device scanning
* @channel_class : channel class, RAID or SCSI
- * @sysfs_sem : semaphore to serialize access to sysfs res.
+ * @sysfs_mtx : mutex to serialize access to sysfs res.
* @sysfs_uioc : management packet to issue FW calls from sysfs
* @sysfs_mbox64 : mailbox packet to issue FW calls from sysfs
* @sysfs_buffer : data buffer for FW commands issued from sysfs
@@ -208,7 +208,7 @@ typedef struct {
int hw_error;
int fast_load;
uint8_t channel_class;
- struct semaphore sysfs_sem;
+ struct mutex sysfs_mtx;
uioc_t *sysfs_uioc;
mbox64_t *sysfs_mbox64;
caddr_t sysfs_buffer;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
An ounce of practice is worth more than tons of preaching
(Mahatma Gandhi)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
^ permalink raw reply related [flat|nested] 8+ messages in thread* RE: [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver
2007-07-01 16:29 ` [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver Matthias Kaehlcke
@ 2007-07-03 18:09 ` Patro, Sumant
0 siblings, 0 replies; 8+ messages in thread
From: Patro, Sumant @ 2007-07-03 18:09 UTC (permalink / raw)
To: Matthias Kaehlcke, DL-MegaRAID Linux, linux-scsi; +Cc: linux-kernel, akpm
Thank you Matthias for the patch.
Regards,
Sumant
-----Original Message-----
From: Matthias Kaehlcke [mailto:matthias.kaehlcke@gmail.com]
Sent: Sunday, July 01, 2007 9:29 AM
To: DL-MegaRAID Linux; linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org; akpm@linux-foundation.org
Subject: [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox
driver
The Megaraid Mailbox driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/scsi/megaraid/mega_common.h
b/drivers/scsi/megaraid/mega_common.h
index 26e1e6c..fef9ac9 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -21,6 +21,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c
b/drivers/scsi/megaraid/megaraid_mbox.c
index 04d0b69..2cecc64 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -3957,7 +3957,7 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter)
megaraid_sysfs_free_resources(adapter);
}
- sema_init(&raid_dev->sysfs_sem, 1);
+ mutex_init(&raid_dev->sysfs_mtx);
init_waitqueue_head(&raid_dev->sysfs_wait_q);
@@ -4058,7 +4058,7 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter)
/*
* Allow only one read at a time to go through the sysfs
attributes
*/
- down(&raid_dev->sysfs_sem);
+ mutex_lock(&raid_dev->sysfs_mtx);
uioc = raid_dev->sysfs_uioc;
mbox64 = raid_dev->sysfs_mbox64;
@@ -4134,7 +4134,7 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter)
del_timer_sync(timerp);
- up(&raid_dev->sysfs_sem);
+ mutex_unlock(&raid_dev->sysfs_mtx);
return rval;
}
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h
b/drivers/scsi/megaraid/megaraid_mbox.h
index 9de803c..626459d 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -168,7 +168,7 @@ typedef struct {
* @hw_error : set if FW not responding
* @fast_load : If set, skip physical device scanning
* @channel_class : channel class, RAID or SCSI
- * @sysfs_sem : semaphore to serialize access to sysfs
res.
+ * @sysfs_mtx : mutex to serialize access to sysfs
res.
* @sysfs_uioc : management packet to issue FW calls
from sysfs
* @sysfs_mbox64 : mailbox packet to issue FW calls from
sysfs
* @sysfs_buffer : data buffer for FW commands issued
from sysfs
@@ -208,7 +208,7 @@ typedef struct {
int hw_error;
int fast_load;
uint8_t channel_class;
- struct semaphore sysfs_sem;
+ struct mutex sysfs_mtx;
uioc_t *sysfs_uioc;
mbox64_t *sysfs_mbox64;
caddr_t sysfs_buffer;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
An ounce of practice is worth more than tons of preaching
(Mahatma Gandhi)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/5] use mutex instead of semaphore in Philips webcam driver
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
2007-07-01 16:29 ` [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver Matthias Kaehlcke
@ 2007-07-01 16:30 ` Matthias Kaehlcke
2007-07-01 16:32 ` [PATCH 3/5] use mutex instead of semaphore in SMSC LPC47M192 driver Matthias Kaehlcke
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Matthias Kaehlcke @ 2007-07-01 16:30 UTC (permalink / raw)
To: mchehab, video4linux-list; +Cc: linux-kernel, akpm
The Philips webcam driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 085332a..9c0e8d1 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -1099,7 +1099,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
return -EBUSY;
}
- down(&pdev->modlock);
+ mutex_lock(&pdev->modlock);
if (!pdev->usb_init) {
PWC_DEBUG_OPEN("Doing first time initialization.\n");
pdev->usb_init = 1;
@@ -1131,7 +1131,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
if (i < 0) {
PWC_DEBUG_OPEN("Failed to allocate buffers memory.\n");
pwc_free_buffers(pdev);
- up(&pdev->modlock);
+ mutex_unlock(&pdev->modlock);
return i;
}
@@ -1172,7 +1172,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
if (i) {
PWC_DEBUG_OPEN("Second attempt at set_video_mode failed.\n");
pwc_free_buffers(pdev);
- up(&pdev->modlock);
+ mutex_unlock(&pdev->modlock);
return i;
}
@@ -1181,7 +1181,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
PWC_DEBUG_OPEN("Failed to init ISOC stuff = %d.\n", i);
pwc_isoc_cleanup(pdev);
pwc_free_buffers(pdev);
- up(&pdev->modlock);
+ mutex_unlock(&pdev->modlock);
return i;
}
@@ -1191,7 +1191,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
pdev->vopen++;
file->private_data = vdev;
- up(&pdev->modlock);
+ mutex_unlock(&pdev->modlock);
PWC_DEBUG_OPEN("<< video_open() returns 0.\n");
return 0;
}
@@ -1685,7 +1685,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
pdev->angle_range.tilt_max = 2500;
}
- init_MUTEX(&pdev->modlock);
+ mutex_init(&pdev->modlock);
spin_lock_init(&pdev->ptrlock);
pdev->udev = udev;
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index acbb931..910a04f 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -31,7 +31,7 @@
#include <linux/wait.h>
#include <linux/smp_lock.h>
#include <linux/version.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include <asm/errno.h>
#include <linux/videodev.h>
#include <media/v4l2-common.h>
@@ -244,7 +244,7 @@ struct pwc_device
int image_read_pos; /* In case we read data in pieces, keep track of were we are in the imagebuffer */
int image_used[MAX_IMAGES]; /* For MCAPTURE and SYNC */
- struct semaphore modlock; /* to prevent races in video_open(), etc */
+ struct mutex modlock; /* to prevent races in video_open(), etc */
spinlock_t ptrlock; /* for manipulating the buffer pointers */
/*** motorized pan/tilt feature */
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
"The only important thing Windows does better
than Debian is implementing the win32 platform"
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/5] use mutex instead of semaphore in SMSC LPC47M192 driver
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
2007-07-01 16:29 ` [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver Matthias Kaehlcke
2007-07-01 16:30 ` [PATCH 2/5] use mutex instead of semaphore in Philips webcam driver Matthias Kaehlcke
@ 2007-07-01 16:32 ` Matthias Kaehlcke
2007-07-01 17:26 ` [lm-sensors] " Mark M. Hoffman
2007-07-01 16:33 ` [PATCH 4/5] use mutex instead of semaphore in Virtual Video driver Matthias Kaehlcke
2007-07-01 16:35 ` [PATCH 5/5] use mutex instead of semaphore in VLSI 82C147 IrDA controller driver Matthias Kaehlcke
4 siblings, 1 reply; 8+ messages in thread
From: Matthias Kaehlcke @ 2007-07-01 16:32 UTC (permalink / raw)
To: khali, lm-sensors; +Cc: linux-kernel, akpm
The SMSC LPC47M192 driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index a012f39..7c5cfa2 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -31,6 +31,7 @@
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/sysfs.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
@@ -97,7 +98,7 @@ static inline int TEMP_FROM_REG(s8 val)
struct smsc47m192_data {
struct i2c_client client;
struct class_device *class_dev;
- struct semaphore update_lock;
+ struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -164,11 +165,11 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val, nr);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_IN_MIN(nr),
data->in_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -181,11 +182,11 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val, nr);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_IN_MAX(nr),
data->in_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -243,11 +244,11 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_min[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_TEMP_MIN[nr],
data->temp_min[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -260,11 +261,11 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
struct smsc47m192_data *data = i2c_get_clientdata(client);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_max[nr] = TEMP_TO_REG(val);
i2c_smbus_write_byte_data(client, SMSC47M192_REG_TEMP_MAX[nr],
data->temp_max[nr]);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -287,7 +288,7 @@ static ssize_t set_temp_offset(struct device *dev, struct device_attribute
u8 sfr = i2c_smbus_read_byte_data(client, SMSC47M192_REG_SFR);
long val = simple_strtol(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
data->temp_offset[nr] = TEMP_TO_REG(val);
if (nr>1)
i2c_smbus_write_byte_data(client,
@@ -303,7 +304,7 @@ static ssize_t set_temp_offset(struct device *dev, struct device_attribute
} else if ((sfr & 0x10) == (nr==0 ? 0x10 : 0))
i2c_smbus_write_byte_data(client,
SMSC47M192_REG_TEMP_OFFSET(nr), 0);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
@@ -531,7 +532,7 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
/* Fill in the remaining client fields and put into the global list */
strlcpy(client->name, "smsc47m192", I2C_NAME_SIZE);
data->vrm = vid_which_vrm();
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(client)))
@@ -594,7 +595,7 @@ static struct smsc47m192_data *smsc47m192_update_device(struct device *dev)
struct smsc47m192_data *data = i2c_get_clientdata(client);
int i, config;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
@@ -645,7 +646,7 @@ static struct smsc47m192_data *smsc47m192_update_device(struct device *dev)
data->valid = 1;
}
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return data;
}
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
El camino se hace al andar
(Antonio Machado)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 4/5] use mutex instead of semaphore in Virtual Video driver
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
` (2 preceding siblings ...)
2007-07-01 16:32 ` [PATCH 3/5] use mutex instead of semaphore in SMSC LPC47M192 driver Matthias Kaehlcke
@ 2007-07-01 16:33 ` Matthias Kaehlcke
2007-07-01 16:35 ` [PATCH 5/5] use mutex instead of semaphore in VLSI 82C147 IrDA controller driver Matthias Kaehlcke
4 siblings, 0 replies; 8+ messages in thread
From: Matthias Kaehlcke @ 2007-07-01 16:33 UTC (permalink / raw)
To: mchehab, video4linux-list; +Cc: linux-kernel, akpm
The Virtual Video driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index f7e1d19..e86f4cd 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -25,6 +25,7 @@
#include <linux/pci.h>
#include <linux/random.h>
#include <linux/version.h>
+#include <linux/mutex.h>
#include <linux/videodev2.h>
#include <linux/dma-mapping.h>
#ifdef CONFIG_VIDEO_V4L1_COMPAT
@@ -168,7 +169,7 @@ static LIST_HEAD(vivi_devlist);
struct vivi_dev {
struct list_head vivi_devlist;
- struct semaphore lock;
+ struct mutex lock;
int users;
@@ -892,16 +893,16 @@ static struct videobuf_queue_ops vivi_video_qops = {
static int res_get(struct vivi_dev *dev, struct vivi_fh *fh)
{
/* is it free? */
- down(&dev->lock);
+ mutex_lock(&dev->lock);
if (dev->resources) {
/* no, someone else uses it */
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
/* it's free, grab it */
dev->resources =1;
dprintk(1,"res: get\n");
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 1;
}
@@ -912,10 +913,10 @@ static int res_locked(struct vivi_dev *dev)
static void res_free(struct vivi_dev *dev, struct vivi_fh *fh)
{
- down(&dev->lock);
+ mutex_lock(&dev->lock);
dev->resources = 0;
dprintk(1,"res: put\n");
- up(&dev->lock);
+ mutex_lock(&dev->lock);
}
/* ------------------------------------------------------------------
@@ -1422,7 +1423,7 @@ static int __init vivi_init(void)
init_waitqueue_head(&dev->vidq.wq);
/* initialize locks */
- init_MUTEX(&dev->lock);
+ mutex_init(&dev->lock);
dev->vidq.timeout.function = vivi_vid_timeout;
dev->vidq.timeout.data = (unsigned long)dev;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
In itself, homosexuality is as limiting as heterosexuality: the
ideal should be to be capable of loving a woman or a man; either,
a human being, without feeling fear, restraint, or obligation
(Simone de Beauvoir)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 5/5] use mutex instead of semaphore in VLSI 82C147 IrDA controller driver
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
` (3 preceding siblings ...)
2007-07-01 16:33 ` [PATCH 4/5] use mutex instead of semaphore in Virtual Video driver Matthias Kaehlcke
@ 2007-07-01 16:35 ` Matthias Kaehlcke
4 siblings, 0 replies; 8+ messages in thread
From: Matthias Kaehlcke @ 2007-07-01 16:35 UTC (permalink / raw)
To: samuel; +Cc: linux-kernel, akpm
The VLSI 82C147 IrDA controller driver uses a semaphore as mutex. Use
the mutex API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index bf78ef1..0538ca9 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -44,6 +44,7 @@ MODULE_LICENSE("GPL");
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -1660,8 +1661,8 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
idev = ndev->priv;
spin_lock_init(&idev->lock);
- init_MUTEX(&idev->sem);
- down(&idev->sem);
+ mutex_init(&idev->mtx);
+ mutex_lock(&idev->mtx);
idev->pdev = pdev;
if (vlsi_irda_init(ndev) < 0)
@@ -1689,12 +1690,12 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
pci_set_drvdata(pdev, ndev);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
out_freedev:
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
out_disable:
pci_disable_device(pdev);
@@ -1716,12 +1717,12 @@ static void __devexit vlsi_irda_remove(struct pci_dev *pdev)
unregister_netdev(ndev);
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (idev->proc_entry) {
remove_proc_entry(ndev->name, vlsi_proc_root);
idev->proc_entry = NULL;
}
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
@@ -1751,7 +1752,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state != 0) { /* already suspended */
if (state.event > pdev->current_state) { /* simply go deeper */
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1759,7 +1760,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
}
else
IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1775,7 +1776,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pdev->current_state = state.event;
idev->resume_ok = 1;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1790,9 +1791,9 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state == 0) {
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
IRDA_WARNING("%s - %s: already resumed\n",
__FUNCTION__, pci_name(pdev));
return 0;
@@ -1814,7 +1815,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
* device and independently resume_ok should catch any garbage config.
*/
IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1824,7 +1825,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
netif_device_attach(ndev);
}
idev->resume_ok = 0;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index 2d3b773..ca12a60 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -728,7 +728,7 @@ typedef struct vlsi_irda_dev {
struct timeval last_rx;
spinlock_t lock;
- struct semaphore sem;
+ struct mutex mtx;
u8 resume_ok;
struct proc_dir_entry *proc_entry;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
You can chain me, you can torture me, you can even
destroy this body, but you will never imprison my mind
(Mahatma Gandhi)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
^ permalink raw reply related [flat|nested] 8+ messages in thread