From: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
To: samuel@sortiz.org
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org
Subject: [PATCH 5/5] use mutex instead of semaphore in VLSI 82C147 IrDA controller driver
Date: Sun, 1 Jul 2007 18:35:13 +0200 [thread overview]
Message-ID: <20070701163513.GH3940@traven> (raw)
In-Reply-To: <20070701162529.GC3940@traven>
The VLSI 82C147 IrDA controller driver uses a semaphore as mutex. Use
the mutex API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index bf78ef1..0538ca9 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -44,6 +44,7 @@ MODULE_LICENSE("GPL");
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
@@ -1660,8 +1661,8 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
idev = ndev->priv;
spin_lock_init(&idev->lock);
- init_MUTEX(&idev->sem);
- down(&idev->sem);
+ mutex_init(&idev->mtx);
+ mutex_lock(&idev->mtx);
idev->pdev = pdev;
if (vlsi_irda_init(ndev) < 0)
@@ -1689,12 +1690,12 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
pci_set_drvdata(pdev, ndev);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
out_freedev:
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
out_disable:
pci_disable_device(pdev);
@@ -1716,12 +1717,12 @@ static void __devexit vlsi_irda_remove(struct pci_dev *pdev)
unregister_netdev(ndev);
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (idev->proc_entry) {
remove_proc_entry(ndev->name, vlsi_proc_root);
idev->proc_entry = NULL;
}
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
@@ -1751,7 +1752,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state != 0) { /* already suspended */
if (state.event > pdev->current_state) { /* simply go deeper */
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1759,7 +1760,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
}
else
IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1775,7 +1776,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pdev->current_state = state.event;
idev->resume_ok = 1;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1790,9 +1791,9 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state == 0) {
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
IRDA_WARNING("%s - %s: already resumed\n",
__FUNCTION__, pci_name(pdev));
return 0;
@@ -1814,7 +1815,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
* device and independently resume_ok should catch any garbage config.
*/
IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
@@ -1824,7 +1825,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
netif_device_attach(ndev);
}
idev->resume_ok = 0;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index 2d3b773..ca12a60 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -728,7 +728,7 @@ typedef struct vlsi_irda_dev {
struct timeval last_rx;
spinlock_t lock;
- struct semaphore sem;
+ struct mutex mtx;
u8 resume_ok;
struct proc_dir_entry *proc_entry;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
You can chain me, you can torture me, you can even
destroy this body, but you will never imprison my mind
(Mahatma Gandhi)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
prev parent reply other threads:[~2007-07-01 16:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-01 16:25 [PATCH 0/5] use mutex instead of semaphore in several drivers Matthias Kaehlcke
2007-07-01 16:29 ` [PATCH 1/5] use mutex instead of semaphore in Megaraid Mailbox driver Matthias Kaehlcke
2007-07-03 18:09 ` Patro, Sumant
2007-07-01 16:30 ` [PATCH 2/5] use mutex instead of semaphore in Philips webcam driver Matthias Kaehlcke
2007-07-01 16:32 ` [PATCH 3/5] use mutex instead of semaphore in SMSC LPC47M192 driver Matthias Kaehlcke
2007-07-01 17:26 ` [lm-sensors] " Mark M. Hoffman
2007-07-01 16:33 ` [PATCH 4/5] use mutex instead of semaphore in Virtual Video driver Matthias Kaehlcke
2007-07-01 16:35 ` Matthias Kaehlcke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070701163513.GH3940@traven \
--to=matthias.kaehlcke@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=samuel@sortiz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox