public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* pci=assign-busses
@ 2007-07-30  8:29 Alois Nešpor
  2007-07-30 11:53 ` pci=assign-busses Adrian Bunk
  0 siblings, 1 reply; 7+ messages in thread
From: Alois Nešpor @ 2007-07-30  8:29 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 515 bytes --]

Hello,


I view dmesg and find:  "PCI: Bus #0b (-#0e) is hidden behind
transparent bridge #0a (-#0b) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently"

First, i have laptop Fujitsu Siemens Amilo Pro v3505.

dmesg:
"Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e"
without pci=assign-busses and nothing with pci=assign-busses.

I use pci=assign-busses and all works fine, possibly better.

 Thank you.

Regards,
             Alois Nespor, Czech Republic

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 26362 bytes --]

Linux version 2.6.22-ali (root@amilo) (gcc version 4.2.1 20070704 (prerelease)) #1 SMP PREEMPT Sun Jul 29 13:55:55 CEST 2007
Command line: root=/dev/sda1 ro vga=866
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
 BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS)
 BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 259728) 1 entries of 256 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F5AE0, 0014 (r0 PTLTD )
ACPI: RSDT 3F690FAE, 0048 (r1 FSC    PC        6040000  LTP        0)
ACPI: FACP 3F697CAA, 0074 (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: DSDT 3F691B77, 6133 (r1 WS     Y40       6040000 MSFT  100000E)
ACPI: FACS 3F698FC0, 0040
ACPI: APIC 3F697D1E, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: HPET 3F697D86, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: MCFG 3F697DBE, 003C (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: SLIC 3F697DFA, 0176 (r1 FSC    PC        6040000 PTL         1)
ACPI: APIC 3F697F70, 0068 (r1 PTLTD      APIC    6040000  LTP        0)
ACPI: BOOT 3F697FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 3F69196D, 020A (r1 SataRe SataAhci     1000 INTL 20050624)
ACPI: SSDT 3F690FF6, 04F6 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 259728) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   259728
On node 0 totalpages: 259631
  DMA zone: 56 pages used for memmap
  DMA zone: 2501 pages reserved
  DMA zone: 1442 pages, LIFO batch:0
  DMA32 zone: 3494 pages used for memmap
  DMA32 zone: 252138 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 31088 bytes of per cpu data
Built 1 zonelists.  Total pages: 253580
Kernel command line: root=/dev/sda1 ro vga=866
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1662.652 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1012324k/1038912k available (6262k kernel code, 25912k reserved, 2780k data, 320k init)
Calibrating delay using timer specific routine.. 3328.29 BogoMIPS (lpj=1664146)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 10391570
Detected 10.391 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3325.18 BogoMIPS (lpj=1662594)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *5
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
Switched to high resolution mode on CPU 1
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: d2000000-d3ffffff
  PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: d4000000-d40fffff
  PREFETCH window: disabled.
PCI: Bus 11, cardbus bridge: 0000:0a:06.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-3fff
  MEM window: d4100000-d41fffff
  PREFETCH window: 50000000-53ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:0a:06.0[A] -> GSI 22 (level, low) -> IRQ 22
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
DLM (built Jul 29 2007 13:50:40) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 7911, nTxLock = 63288
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010680000, using 7872k, total 7872k
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
intel_rng: FWH not detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
intelfb: Cannot reserve FB region.
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
Linux video capture interface: v2.00
usbcore: registered new interface driver dabusb
drivers/media/video/dabusb.c: v1.54:DAB-USB Interface Driver for Linux (c)1999
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000036500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata2: SATA max UDMA/133 cmd 0xffffc20000036580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata3: SATA max UDMA/133 cmd 0xffffc20000036600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata4: SATA max UDMA/133 cmd 0xffffc20000036680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HTS721080G9SA00, MC4OC10V, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access     ATA      HTS721080G9SA00  MC4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Yenta: CardBus bridge found at 0000:0a:06.0 [1734:10c1]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:0a:06.0, mfunc 0x00001202, devctl 0x44
Yenta: ISA IRQ mask 0x04f8, PCI irq 22
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia: parent PCI bridge Memory window: 0xd4100000 - 0xd41fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4544000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
usb 2-1: new low speed USB device using uhci_hcd and address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:0a:06.2 [1524:0550] (rev 1)
sdhci [sdhci_probe()]: found 1 slot(s)
ACPI: PCI Interrupt 0000:0a:06.2[B] -> GSI 20 (level, low) -> IRQ 20
sdhci [sdhci_probe_slot()]: slot 0 at 0xd4101400, irq 20
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x00000000 | Version:  0x00000100
sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present:  0x01f20000 | Host ctl: 0x00000000
sdhci: Power:    0x00000000 | Blk gap:  0x00000000
sdhci: Wake-up:  0x00000000 | Clock:    0x00000000
sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps:     0x01e021a1 | Max curr: 0x000000ff
sdhci: ===========================================
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
mmc0: SDHCI at 0xd4101400 irq 20 DMA
mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
mmc0: clock 128906Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
mmc0: starting CMD0 arg 00000000 flags 00000040
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (0)
mmc0: req done (CMD0): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
wbsd: Winbond W83L51xD SD/MMC card interface driver
mmc0: starting CMD8 arg 000001aa flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (8)
mmc0: req done (CMD8): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD1 arg 00000000 flags 00000061
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (1)
mmc0: req done (CMD1): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
input: Logitech USB Receiver as /class/input/input3
input,hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
ALSA device list:
  #0: HDA Intel at 0xd4540000 irq 21
oprofile: using NMI interrupt.
NET: Registered protocol family 26
netem: version 1.2
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4058 buckets, 32464 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 4
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lec.c: Jul 29 2007 13:52:12 initialized
mpc.c: Jul 29 2007 13:52:07 initialized
SCTP: Hash tables configured (established 65536 bind 65536)
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 320k freed
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.14 addr 0xd2000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:0a:e4:bb:12:ad
ACPI: SSDT 3F69173C, 01A8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 3F6914EC, 01CB (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: SSDT 3F6918E4, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 3F6916B7, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
cpuidle: using driver acpi_idle
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
fuse init (API version 7.8)
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ACPI: Thermal Zone [TZS0] (25 C)
ACPI: Thermal Zone [TZS1] (28 C)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.2d
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
Adding 979956k swap on /dev/sda3.  Priority:-1 extents:1 across:979956k
ADDRCONF(NETDEV_UP): wlan0: link is not ready

[-- Attachment #3: dmesg2 --]
[-- Type: application/octet-stream, Size: 26252 bytes --]

Linux version 2.6.22-ali (root@amilo) (gcc version 4.2.1 20070704 (prerelease)) #1 SMP PREEMPT Sun Jul 29 13:55:55 CEST 2007
Command line: root=/dev/sda1 ro vga=866 pci=assign-busses acpi_apic_instance=2
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
 BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS)
 BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
ACPI: Shall use APIC/MADT table 2
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 259728) 1 entries of 256 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F5AE0, 0014 (r0 PTLTD )
ACPI: RSDT 3F690FAE, 0048 (r1 FSC    PC        6040000  LTP        0)
ACPI: FACP 3F697CAA, 0074 (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: DSDT 3F691B77, 6133 (r1 WS     Y40       6040000 MSFT  100000E)
ACPI: FACS 3F698FC0, 0040
ACPI: APIC 3F697D1E, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: HPET 3F697D86, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: MCFG 3F697DBE, 003C (r1 INTEL  CALISTGA  6040000 LOHR       65)
ACPI: SLIC 3F697DFA, 0176 (r1 FSC    PC        6040000 PTL         1)
ACPI: APIC 3F697F70, 0068 (r1 PTLTD      APIC    6040000  LTP        0)
ACPI: BOOT 3F697FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 3F69196D, 020A (r1 SataRe SataAhci     1000 INTL 20050624)
ACPI: SSDT 3F690FF6, 04F6 (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 2
ACPI: If "acpi_apic_instance=0" works better, notify linux-acpi@vger.kernel.org
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 259728) 1 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   259728
On node 0 totalpages: 259631
  DMA zone: 56 pages used for memmap
  DMA zone: 2501 pages reserved
  DMA zone: 1442 pages, LIFO batch:0
  DMA32 zone: 3494 pages used for memmap
  DMA32 zone: 252138 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 31088 bytes of per cpu data
Built 1 zonelists.  Total pages: 253580
Kernel command line: root=/dev/sda1 ro vga=866 pci=assign-busses acpi_apic_instance=2
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1662.652 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1012324k/1038912k available (6262k kernel code, 25912k reserved, 2780k data, 320k init)
Calibrating delay using timer specific routine.. 3328.26 BogoMIPS (lpj=1664133)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 10391567
Detected 10.391 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3325.19 BogoMIPS (lpj=1662595)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring handled by SMI
Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *5
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: d2000000-d3ffffff
  PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: d4000000-d40fffff
  PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:06.0
  IO window: 00003000-000030ff
  IO window: 00003400-000034ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-3fff
  MEM window: d4100000-d41fffff
  PREFETCH window: 50000000-53ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
Switched to high resolution mode on CPU 1
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 22 (level, low) -> IRQ 22
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
DLM (built Jul 29 2007 13:50:40) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.28 [Flags: R/W].
JFS: nTxBlock = 7911, nTxLock = 63288
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010680000, using 7872k, total 7872k
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
intel_rng: FWH not detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
intelfb: Cannot reserve FB region.
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
Linux video capture interface: v2.00
usbcore: registered new interface driver dabusb
drivers/media/video/dabusb.c: v1.54:DAB-USB Interface Driver for Linux (c)1999
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000036500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata2: SATA max UDMA/133 cmd 0xffffc20000036580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata3: SATA max UDMA/133 cmd 0xffffc20000036600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata4: SATA max UDMA/133 cmd 0xffffc20000036680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HTS721080G9SA00, MC4OC10V, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access     ATA      HTS721080G9SA00  MC4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
Yenta: CardBus bridge found at 0000:03:06.0 [1734:10c1]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:06.0, mfunc 0x00001202, devctl 0x44
Yenta: ISA IRQ mask 0x04f8, PCI irq 22
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia: parent PCI bridge Memory window: 0xd4100000 - 0xd41fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4544000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
usb 2-1: new low speed USB device using uhci_hcd and address 2
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
usb 2-1: configuration #1 chosen from 1 choice
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:03:06.2 [1524:0550] (rev 1)
sdhci [sdhci_probe()]: found 1 slot(s)
ACPI: PCI Interrupt 0000:03:06.2[B] -> GSI 20 (level, low) -> IRQ 20
sdhci [sdhci_probe_slot()]: slot 0 at 0xd4101400, irq 20
sdhci: ============== REGISTER DUMP ==============
sdhci: Sys addr: 0x00000000 | Version:  0x00000100
sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present:  0x01f20000 | Host ctl: 0x00000000
sdhci: Power:    0x00000000 | Blk gap:  0x00000000
sdhci: Wake-up:  0x00000000 | Clock:    0x00000000
sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps:     0x01e021a1 | Max curr: 0x000000ff
sdhci: ===========================================
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
mmc0: SDHCI at 0xd4101400 irq 20 DMA
mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0
mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
mmc0: clock 128906Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0
mmc0: starting CMD0 arg 00000000 flags 00000040
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (0)
mmc0: req done (CMD0): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
wbsd: Winbond W83L51xD SD/MMC card interface driver
mmc0: starting CMD8 arg 000001aa flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (8)
mmc0: req done (CMD8): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD55 arg 00000000 flags 00000075
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37)
mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: starting CMD1 arg 00000000 flags 00000061
sdhci [sdhci_tasklet_finish()]: Ending request, cmd (1)
mmc0: req done (CMD1): 1/0/0: 00000000 00000000 00000000 00000000
mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
input: Logitech USB Receiver as /class/input/input3
input,hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
ALSA device list:
  #0: HDA Intel at 0xd4540000 irq 21
oprofile: using NMI interrupt.
NET: Registered protocol family 26
netem: version 1.2
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4058 buckets, 32464 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 4
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lec.c: Jul 29 2007 13:52:12 initialized
mpc.c: Jul 29 2007 13:52:07 initialized
SCTP: Hash tables configured (established 65536 bind 65536)
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 320k freed
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
sky2 0000:01:00.0: v1.14 addr 0xd2000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:0a:e4:bb:12:ad
ACPI: SSDT 3F69173C, 01A8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 3F6914EC, 01CB (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: SSDT 3F6918E4, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 3F6916B7, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
cpuidle: using driver acpi_idle
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
fuse init (API version 7.8)
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ACPI: Thermal Zone [TZS0] (44 C)
ACPI: Thermal Zone [TZS1] (44 C)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.2d
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
Adding 979956k swap on /dev/sda3.  Priority:-1 extents:1 across:979956k
ADDRCONF(NETDEV_UP): wlan0: link is not ready
 

[-- Attachment #4: lspci --]
[-- Type: application/octet-stream, Size: 2123 bytes --]


00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 12)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
03:06.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
03:06.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
03:06.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
03:06.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01) 

^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2007-07-30 20:16 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-30  8:29 pci=assign-busses Alois Nešpor
2007-07-30 11:53 ` pci=assign-busses Adrian Bunk
2007-07-30 12:24   ` pci=assign-busses Damien Wyart
2007-07-30 18:35   ` Ok, lets kill the 'PCI hidden behind bridge' message (was: pci=assign-busses) Bernhard Kaindl
2007-07-30 20:11     ` Adrian Bunk
2007-07-30 20:14       ` Greg KH
2007-07-30 20:15     ` Daniel Hazelton

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox