[patch 24/26] sky2: workaround for lost IRQ

[Greg KH <gregkh@suse.de>]

[-- Attachment #1: sky2-workaround-for-lost-irq.patch --]
[-- Type: text/plain, Size: 1526 bytes --]

-stable review patch.  If anyone has any objections, please let us know.

------------------

This patch restores a couple of workarounds from 2.6.16:
 * restart transmit moderation timer in case it expires during IRQ routine
 * default to having 10 HZ watchdog timer.
At this point it more important not to hang than to worry about the
power cost.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/net/sky2.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- linux-2.6.21.6.orig/drivers/net/sky2.c
+++ linux-2.6.21.6/drivers/net/sky2.c
@@ -95,7 +95,7 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
-static int idle_timeout = 0;
+static int idle_timeout = 100;
 module_param(idle_timeout, int, 0);
 MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
 
@@ -2433,6 +2433,13 @@ static int sky2_poll(struct net_device *
 
 	work_done = sky2_status_intr(hw, work_limit);
 	if (work_done < work_limit) {
+		/* Bug/Errata workaround?
+		 * Need to kick the TX irq moderation timer.
+		 */
+		if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+			sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+			sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+		}
 		netif_rx_complete(dev0);
 
 		sky2_read32(hw, B0_Y2_SP_LISR);

--