From: Konstantin Baydarov <kbaidarov@ru.mvista.com>
To: Daniel Walker <dwalker@mvista.com>
Cc: RT <linux-rt-users@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] kexec: reenable HPET before kexec
Date: Tue, 21 Aug 2007 17:01:41 +0400 [thread overview]
Message-ID: <20070821170141.70a95dac@windmill.dev.rtsoft.ru> (raw)
In-Reply-To: <1187645464.7732.43.camel@imap.mvista.com>
On Mon, 20 Aug 2007 14:31:04 -0700
Daniel Walker <dwalker@mvista.com> wrote:
> On Tue, 2007-08-21 at 01:10 +0400, Konstantin Baydarov wrote:
>
> It was in your original email .. Are you saying this it is not a
> problem in plain 2.6.23-rc2? I thought I read that it was a problem on
> i386 ..
>
> Daniel
>
I can reproduce bug with plain 2.6.23-rc3 i386 kernel, without RT patch,
on pentiumd.
So I fixed this issue the same way as I fixed RT kernel. The side effect
of this fix is that when kernel 2 executes both Local APIC timer and HPET
are enabled and produce timer interrupts:
root@192.168.40.10:~# cat /proc/interrupts
CPU0 CPU1
0: 5643 0 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
2: 0 0 XT-PIC-XT cascade
4: 303 181 IO-APIC-edge serial
6: 3 0 IO-APIC-edge floppy
12: 4 0 IO-APIC-edge i8042
14: 11 0 IO-APIC-edge ide0
17: 5701 16 IO-APIC-fasteoi uhci_hcd:usb3, eth0
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb5
20: 38 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
23: 3 0 IO-APIC-fasteoi libata
NMI: 0 0
LOC: 5525 5489
ERR: 0
MIS: 0
root@192.168.40.10:~#
IRQ0 and LOC values practically the same.
Also I didn't see this bug on linux-rt-users@vger.kernel.org, maybe I should
resend it?
Patch against 2.6.23-rc3.
Signed-off-by: Konstantin Baydarov <kbaidarov@ru.mvista.com>
arch/i386/kernel/hpet.c | 15 +++++++++++++++
arch/i386/kernel/machine_kexec.c | 5 +++++
include/asm-i386/hpet.h | 3 +++
3 files changed, 23 insertions(+)
Index: linux-2.6.23-rc3-i386/arch/i386/kernel/hpet.c
===================================================================
--- linux-2.6.23-rc3-i386.orig/arch/i386/kernel/hpet.c
+++ linux-2.6.23-rc3-i386/arch/i386/kernel/hpet.c
@@ -340,6 +340,21 @@ out_nohpet:
return 0;
}
+#ifdef CONFIG_KEXEC
+/*
+ * reenable HPET timer
+ */
+int hpet_reenable(void)
+{
+ if (!is_hpet_capable())
+ return -1;
+
+ if (hpet_clockevent.mode != CLOCK_EVT_MODE_PERIODIC)
+ hpet_set_mode(CLOCK_EVT_MODE_PERIODIC, &hpet_clockevent);
+
+ return 0;
+}
+#endif
#ifdef CONFIG_HPET_EMULATE_RTC
Index: linux-2.6.23-rc3-i386/arch/i386/kernel/machine_kexec.c
===================================================================
--- linux-2.6.23-rc3-i386.orig/arch/i386/kernel/machine_kexec.c
+++ linux-2.6.23-rc3-i386/arch/i386/kernel/machine_kexec.c
@@ -19,6 +19,7 @@
#include <asm/cpufeature.h>
#include <asm/desc.h>
#include <asm/system.h>
+#include <asm/hpet.h>
#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -109,6 +110,10 @@ NORET_TYPE void machine_kexec(struct kim
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
+#ifdef CONFIG_HPET_TIMER
+ hpet_reenable();
+#endif
+
control_page = page_address(image->control_code_page);
memcpy(control_page, relocate_kernel, PAGE_SIZE);
Index: linux-2.6.23-rc3-i386/include/asm-i386/hpet.h
===================================================================
--- linux-2.6.23-rc3-i386.orig/include/asm-i386/hpet.h
+++ linux-2.6.23-rc3-i386/include/asm-i386/hpet.h
@@ -66,6 +66,9 @@
extern unsigned long hpet_address;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
+#ifdef CONFIG_KEXEC
+extern int hpet_reenable(void);
+#endif
#ifdef CONFIG_HPET_EMULATE_RTC
next prev parent reply other threads:[~2007-08-21 12:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-20 16:55 [PATCH] kexec: reenable HPET before kexec Konstantin Baydarov
2007-08-20 18:26 ` Andi Kleen
2007-08-20 21:10 ` Konstantin Baydarov
2007-08-20 21:31 ` Daniel Walker
2007-08-21 13:01 ` Konstantin Baydarov [this message]
2007-08-23 9:08 ` Vivek Goyal
2007-08-23 11:49 ` Konstantin Baydarov
2007-08-27 5:36 ` Vivek Goyal
2007-08-27 18:26 ` Pallipadi, Venkatesh
2007-08-27 18:33 ` Eric W. Biederman
2007-08-28 12:58 ` Konstantin Baydarov
2007-08-30 7:32 ` Eric W. Biederman
2007-08-30 16:07 ` Konstantin Baydarov
2007-08-30 18:04 ` Eric W. Biederman
2007-08-31 10:31 ` Konstantin Baydarov
2007-09-17 9:47 ` Konstantin Baydarov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070821170141.70a95dac@windmill.dev.rtsoft.ru \
--to=kbaidarov@ru.mvista.com \
--cc=dwalker@mvista.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox