* [patch 01/10] cio: dont forget to set last slot to NULL in ccw_uevent().
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 02/10] cio: change confusing message in cmf Martin Schwidefsky
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390
Cc: Cornelia Huck, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 001-cio-uevent.diff --]
[-- Type: text/plain, Size: 926 bytes --]
From: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
drivers/s390/cio/device.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
Index: quilt-2.6/drivers/s390/cio/device.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/device.c
+++ quilt-2.6/drivers/s390/cio/device.c
@@ -117,7 +117,10 @@ static int ccw_uevent(struct device *dev
snprint_alias(modalias_buf, sizeof(modalias_buf), id, "");
ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len,
"MODALIAS=%s", modalias_buf);
- return ret;
+ if (ret)
+ return ret;
+ envp[i] = NULL;
+ return 0;
}
struct bus_type ccw_bus_type;
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 02/10] cio: change confusing message in cmf.
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
2007-08-22 12:36 ` [patch 01/10] cio: dont forget to set last slot to NULL in ccw_uevent() Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 03/10] qdio: fix EQBS handling on CCQ96 Martin Schwidefsky
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390; +Cc: Cornelia Huck, Martin Schwidefsky
[-- Attachment #1: 002-cio-cmf.diff --]
[-- Type: text/plain, Size: 1697 bytes --]
From: Cornelia Huck <cornelia.huck@de.ibm.com>
cmf currently prints a message that more than 4096 channels are not
allowed in basic mode - however, this can only be enforced if cmf was
a module (which is no longer possible). It makes much more sense to
not check the specified number of channels and just print a message if
the block for basic mode could not be allocated (which may happen for
any number of specified channels).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/cio/cmf.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
Index: quilt-2.6/drivers/s390/cio/cmf.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/cmf.c
+++ quilt-2.6/drivers/s390/cio/cmf.c
@@ -594,6 +594,9 @@ alloc_cmb (struct ccw_device *cdev)
free_pages((unsigned long)mem, get_order(size));
} else if (!mem) {
/* no luck */
+ printk(KERN_WARNING "cio: failed to allocate area "
+ "for measuring %d subchannels\n",
+ cmb_area.num_channels);
ret = -ENOMEM;
goto out;
} else {
@@ -1279,13 +1282,6 @@ init_cmf(void)
case CMF_BASIC:
format_string = "basic";
cmbops = &cmbops_basic;
- if (cmb_area.num_channels > 4096 || cmb_area.num_channels < 1) {
- printk(KERN_ERR "cio: Basic channel measurement "
- "facility can only use 1 to 4096 devices\n"
- KERN_ERR "when the cmf driver is built"
- " as a loadable module\n");
- return 1;
- }
break;
case CMF_EXTENDED:
format_string = "extended";
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 03/10] qdio: fix EQBS handling on CCQ96
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
2007-08-22 12:36 ` [patch 01/10] cio: dont forget to set last slot to NULL in ccw_uevent() Martin Schwidefsky
2007-08-22 12:36 ` [patch 02/10] cio: change confusing message in cmf Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 04/10] qdio: Refresh buffer states for IQDIO Asynchronous output queue Martin Schwidefsky
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390
Cc: Klaus D. Wacker, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 003-qdio-eqbs.diff --]
[-- Type: text/plain, Size: 1299 bytes --]
From: Klaus D. Wacker <kdwacker@de.ibm.com>
QDIO returned from EQBS instruction in any case after return code
CCQ=96 was issued regardless whether buffer states for at least one
buffer were extracted or not.
This caused FCP devices to hang when running under z/VM and having
QIOASSASIST=ON and having high I/O rates.
In order to fix this qdio return code processing of EQBS instruction
after CCQ=96 is changed that buffers are returned and if no buffers
where extracted the instruction is repeated at once.
Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
drivers/s390/cio/qdio.c | 2 ++
1 file changed, 2 insertions(+)
Index: quilt-2.6/drivers/s390/cio/qdio.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/qdio.c
+++ quilt-2.6/drivers/s390/cio/qdio.c
@@ -195,6 +195,8 @@ qdio_do_eqbs(struct qdio_q *q, unsigned
again:
ccq = do_eqbs(irq->sch_token, state, q_no, start, cnt);
rc = qdio_check_ccq(q, ccq);
+ if ((ccq == 96) && (tmp_cnt != *cnt))
+ rc = 0;
if (rc == 1) {
QDIO_DBF_TEXT5(1,trace,"eqAGAIN");
goto again;
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 04/10] qdio: Refresh buffer states for IQDIO Asynchronous output queue
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (2 preceding siblings ...)
2007-08-22 12:36 ` [patch 03/10] qdio: fix EQBS handling on CCQ96 Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 05/10] vmur: fix diag14 exceptions with addresses > 2GB Martin Schwidefsky
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390; +Cc: Klaus D. Wacker, Martin Schwidefsky
[-- Attachment #1: 004-qdio-hang.diff --]
[-- Type: text/plain, Size: 1325 bytes --]
From: Klaus D. Wacker <kdwacker@de.ibm.com>
Hipersocket Multicast queue works asynchronously. When sending buffers,
the buffer state change may happen delayed. The tasklet for checking
changes in the outbound queue excluded IQDIO async queues from this
process. This created either a hang situation when the queue ran full,
or presented a hang situation a interface close time.
The tasklet processing is changed to include IQDIO async queues when
requesting buffer state refresh.
Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
drivers/s390/cio/qdio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: quilt-2.6/drivers/s390/cio/qdio.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/qdio.c
+++ quilt-2.6/drivers/s390/cio/qdio.c
@@ -742,7 +742,8 @@ qdio_get_outbound_buffer_frontier(struct
first_not_to_check=f+qdio_min(atomic_read(&q->number_of_buffers_used),
(QDIO_MAX_BUFFERS_PER_Q-1));
- if ((!q->is_iqdio_q)&&(!q->hydra_gives_outbound_pcis))
+ if (((!q->is_iqdio_q) && (!q->hydra_gives_outbound_pcis)) ||
+ (q->queue_type == QDIO_IQDIO_QFMT_ASYNCH))
SYNC_MEMORY;
check_next:
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 05/10] vmur: fix diag14 exceptions with addresses > 2GB.
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (3 preceding siblings ...)
2007-08-22 12:36 ` [patch 04/10] qdio: Refresh buffer states for IQDIO Asynchronous output queue Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 06/10] vmur: fix reference counting for vmur device structure Martin Schwidefsky
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390
Cc: Michael Holzheu, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 005-vmur-diags.diff --]
[-- Type: text/plain, Size: 12260 bytes --]
From: Michael Holzheu <holzheu@de.ibm.com>
There are several s390 diagnose calls, which must be executed below the
2GB memory boundary. In order to enforce this, those diagnoses must be
compiled into the kernel. Currently diag 14 can be called within the
vmur kernel module from addresses above 2GB. This leads to specification
exceptions. This patch moves diag10, diag14 and diag210 into the new
diag.c file.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
arch/s390/kernel/Makefile | 2
arch/s390/kernel/diag.c | 102 +++++++++++++++++++++++++++++++++++++++++
arch/s390/kernel/s390_ksyms.c | 1
arch/s390/mm/cmm.c | 1
arch/s390/mm/init.c | 17 ------
drivers/s390/block/dasd_diag.c | 1
drivers/s390/char/raw3270.c | 1
drivers/s390/char/vmur.c | 32 +-----------
drivers/s390/cio/device_id.c | 48 -------------------
include/asm-s390/cio.h | 15 ------
include/asm-s390/diag.h | 39 +++++++++++++++
include/asm-s390/pgalloc.h | 2
12 files changed, 150 insertions(+), 111 deletions(-)
Index: quilt-2.6/arch/s390/kernel/diag.c
===================================================================
--- /dev/null
+++ quilt-2.6/arch/s390/kernel/diag.c
@@ -0,0 +1,102 @@
+/*
+ * Implementation of s390 diagnose codes
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#include <linux/module.h>
+#include <asm/diag.h>
+
+/*
+ * Diagnose 10: Release pages
+ */
+void diag10(unsigned long addr)
+{
+ if (addr >= 0x7ff00000)
+ return;
+ asm volatile(
+#ifdef CONFIG_64BIT
+ " sam31\n"
+ " diag %0,%0,0x10\n"
+ "0: sam64\n"
+#else
+ " diag %0,%0,0x10\n"
+ "0:\n"
+#endif
+ EX_TABLE(0b, 0b)
+ : : "a" (addr));
+}
+EXPORT_SYMBOL(diag10);
+
+/*
+ * Diagnose 14: Input spool file manipulation
+ */
+int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode)
+{
+ register unsigned long _ry1 asm("2") = ry1;
+ register unsigned long _ry2 asm("3") = subcode;
+ int rc = 0;
+
+ asm volatile(
+#ifdef CONFIG_64BIT
+ " sam31\n"
+ " diag %2,2,0x14\n"
+ " sam64\n"
+#else
+ " diag %2,2,0x14\n"
+#endif
+ " ipm %0\n"
+ " srl %0,28\n"
+ : "=d" (rc), "+d" (_ry2)
+ : "d" (rx), "d" (_ry1)
+ : "cc");
+
+ return rc;
+}
+EXPORT_SYMBOL(diag14);
+
+/*
+ * Diagnose 210: Get information about a virtual device
+ */
+int diag210(struct diag210 *addr)
+{
+ /*
+ * diag 210 needs its data below the 2GB border, so we
+ * use a static data area to be sure
+ */
+ static struct diag210 diag210_tmp;
+ static DEFINE_SPINLOCK(diag210_lock);
+ unsigned long flags;
+ int ccode;
+
+ spin_lock_irqsave(&diag210_lock, flags);
+ diag210_tmp = *addr;
+
+#ifdef CONFIG_64BIT
+ asm volatile(
+ " lhi %0,-1\n"
+ " sam31\n"
+ " diag %1,0,0x210\n"
+ "0: ipm %0\n"
+ " srl %0,28\n"
+ "1: sam64\n"
+ EX_TABLE(0b, 1b)
+ : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
+#else
+ asm volatile(
+ " lhi %0,-1\n"
+ " diag %1,0,0x210\n"
+ "0: ipm %0\n"
+ " srl %0,28\n"
+ "1:\n"
+ EX_TABLE(0b, 1b)
+ : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
+#endif
+
+ *addr = diag210_tmp;
+ spin_unlock_irqrestore(&diag210_lock, flags);
+
+ return ccode;
+}
+EXPORT_SYMBOL(diag210);
Index: quilt-2.6/arch/s390/kernel/Makefile
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/Makefile
+++ quilt-2.6/arch/s390/kernel/Makefile
@@ -6,7 +6,7 @@ EXTRA_AFLAGS := -traditional
obj-y := bitmap.o traps.o time.o process.o base.o early.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
- semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o
+ semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o
obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o)
obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
Index: quilt-2.6/arch/s390/kernel/s390_ksyms.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/s390_ksyms.c
+++ quilt-2.6/arch/s390/kernel/s390_ksyms.c
@@ -25,7 +25,6 @@ EXPORT_SYMBOL(_oi_bitmap);
EXPORT_SYMBOL(_ni_bitmap);
EXPORT_SYMBOL(_zb_findmap);
EXPORT_SYMBOL(_sb_findmap);
-EXPORT_SYMBOL(diag10);
/*
* semaphore ops
Index: quilt-2.6/arch/s390/mm/cmm.c
===================================================================
--- quilt-2.6.orig/arch/s390/mm/cmm.c
+++ quilt-2.6/arch/s390/mm/cmm.c
@@ -20,6 +20,7 @@
#include <asm/pgalloc.h>
#include <asm/uaccess.h>
+#include <asm/diag.h>
static char *sender = "VMRMSVM";
module_param(sender, charp, 0400);
Index: quilt-2.6/arch/s390/mm/init.c
===================================================================
--- quilt-2.6.orig/arch/s390/mm/init.c
+++ quilt-2.6/arch/s390/mm/init.c
@@ -42,23 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_ga
pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
char empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
-void diag10(unsigned long addr)
-{
- if (addr >= 0x7ff00000)
- return;
- asm volatile(
-#ifdef CONFIG_64BIT
- " sam31\n"
- " diag %0,%0,0x10\n"
- "0: sam64\n"
-#else
- " diag %0,%0,0x10\n"
- "0:\n"
-#endif
- EX_TABLE(0b,0b)
- : : "a" (addr));
-}
-
void show_mem(void)
{
int i, total = 0, reserved = 0;
Index: quilt-2.6/drivers/s390/block/dasd_diag.c
===================================================================
--- quilt-2.6.orig/drivers/s390/block/dasd_diag.c
+++ quilt-2.6/drivers/s390/block/dasd_diag.c
@@ -24,6 +24,7 @@
#include <asm/s390_ext.h>
#include <asm/todclk.h>
#include <asm/vtoc.h>
+#include <asm/diag.h>
#include "dasd_int.h"
#include "dasd_diag.h"
Index: quilt-2.6/drivers/s390/char/raw3270.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/raw3270.c
+++ quilt-2.6/drivers/s390/char/raw3270.c
@@ -21,6 +21,7 @@
#include <asm/ccwdev.h>
#include <asm/cio.h>
#include <asm/ebcdic.h>
+#include <asm/diag.h>
#include "raw3270.h"
Index: quilt-2.6/drivers/s390/char/vmur.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/vmur.c
+++ quilt-2.6/drivers/s390/char/vmur.c
@@ -14,6 +14,7 @@
#include <asm/cio.h>
#include <asm/ccwdev.h>
#include <asm/debug.h>
+#include <asm/diag.h>
#include "vmur.h"
@@ -379,31 +380,6 @@ static ssize_t ur_write(struct file *fil
return do_write(urf->urd, udata, count, urf->dev_reclen, ppos);
}
-static int do_diag_14(unsigned long rx, unsigned long ry1,
- unsigned long subcode)
-{
- register unsigned long _ry1 asm("2") = ry1;
- register unsigned long _ry2 asm("3") = subcode;
- int rc = 0;
-
- asm volatile(
-#ifdef CONFIG_64BIT
- " sam31\n"
- " diag %2,2,0x14\n"
- " sam64\n"
-#else
- " diag %2,2,0x14\n"
-#endif
- " ipm %0\n"
- " srl %0,28\n"
- : "=d" (rc), "+d" (_ry2)
- : "d" (rx), "d" (_ry1)
- : "cc");
-
- TRACE("diag 14: subcode=0x%lx, cc=%i\n", subcode, rc);
- return rc;
-}
-
/*
* diagnose code 0x14 subcode 0x0028 - position spool file to designated
* record
@@ -415,7 +391,7 @@ static int diag_position_to_record(int d
{
int cc;
- cc = do_diag_14(record, devno, 0x28);
+ cc = diag14(record, devno, 0x28);
switch (cc) {
case 0:
return 0;
@@ -440,7 +416,7 @@ static int diag_read_file(int devno, cha
{
int cc;
- cc = do_diag_14((unsigned long) buf, devno, 0x00);
+ cc = diag14((unsigned long) buf, devno, 0x00);
switch (cc) {
case 0:
return 0;
@@ -533,7 +509,7 @@ static int diag_read_next_file_info(stru
{
int cc;
- cc = do_diag_14((unsigned long) buf, spid, 0xfff);
+ cc = diag14((unsigned long) buf, spid, 0xfff);
switch (cc) {
case 0:
return 0;
Index: quilt-2.6/drivers/s390/cio/device_id.c
===================================================================
--- quilt-2.6.orig/drivers/s390/cio/device_id.c
+++ quilt-2.6/drivers/s390/cio/device_id.c
@@ -17,6 +17,7 @@
#include <asm/delay.h>
#include <asm/cio.h>
#include <asm/lowcore.h>
+#include <asm/diag.h>
#include "cio.h"
#include "cio_debug.h"
@@ -25,51 +26,6 @@
#include "ioasm.h"
/*
- * diag210 is used under VM to get information about a virtual device
- */
-int
-diag210(struct diag210 * addr)
-{
- /*
- * diag 210 needs its data below the 2GB border, so we
- * use a static data area to be sure
- */
- static struct diag210 diag210_tmp;
- static DEFINE_SPINLOCK(diag210_lock);
- unsigned long flags;
- int ccode;
-
- spin_lock_irqsave(&diag210_lock, flags);
- diag210_tmp = *addr;
-
-#ifdef CONFIG_64BIT
- asm volatile(
- " lhi %0,-1\n"
- " sam31\n"
- " diag %1,0,0x210\n"
- "0: ipm %0\n"
- " srl %0,28\n"
- "1: sam64\n"
- EX_TABLE(0b,1b)
- : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
-#else
- asm volatile(
- " lhi %0,-1\n"
- " diag %1,0,0x210\n"
- "0: ipm %0\n"
- " srl %0,28\n"
- "1:\n"
- EX_TABLE(0b,1b)
- : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
-#endif
-
- *addr = diag210_tmp;
- spin_unlock_irqrestore(&diag210_lock, flags);
-
- return ccode;
-}
-
-/*
* Input :
* devno - device number
* ps - pointer to sense ID data area
@@ -349,5 +305,3 @@ ccw_device_sense_id_irq(struct ccw_devic
break;
}
}
-
-EXPORT_SYMBOL(diag210);
Index: quilt-2.6/include/asm-s390/cio.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/cio.h
+++ quilt-2.6/include/asm-s390/cio.h
@@ -258,19 +258,6 @@ struct ciw {
/* Sick revalidation of device. */
#define CIO_REVALIDATE 0x0008
-struct diag210 {
- __u16 vrdcdvno : 16; /* device number (input) */
- __u16 vrdclen : 16; /* data block length (input) */
- __u32 vrdcvcla : 8; /* virtual device class (output) */
- __u32 vrdcvtyp : 8; /* virtual device type (output) */
- __u32 vrdcvsta : 8; /* virtual device status (output) */
- __u32 vrdcvfla : 8; /* virtual device flags (output) */
- __u32 vrdcrccl : 8; /* real device class (output) */
- __u32 vrdccrty : 8; /* real device type (output) */
- __u32 vrdccrmd : 8; /* real device model (output) */
- __u32 vrdccrft : 8; /* real device feature (output) */
-} __attribute__ ((packed,aligned(4)));
-
struct ccw_dev_id {
u8 ssid;
u16 devno;
@@ -285,8 +272,6 @@ static inline int ccw_dev_id_is_equal(st
return 0;
}
-extern int diag210(struct diag210 *addr);
-
extern void wait_cons_dev(void);
extern void css_schedule_reprobe(void);
Index: quilt-2.6/include/asm-s390/diag.h
===================================================================
--- /dev/null
+++ quilt-2.6/include/asm-s390/diag.h
@@ -0,0 +1,39 @@
+/*
+ * s390 diagnose functions
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_DIAG_H
+#define _ASM_S390_DIAG_H
+
+/*
+ * Diagnose 10: Release pages
+ */
+extern void diag10(unsigned long addr);
+
+/*
+ * Diagnose 14: Input spool file manipulation
+ */
+extern int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode);
+
+/*
+ * Diagnose 210: Get information about a virtual device
+ */
+struct diag210 {
+ u16 vrdcdvno; /* device number (input) */
+ u16 vrdclen; /* data block length (input) */
+ u8 vrdcvcla; /* virtual device class (output) */
+ u8 vrdcvtyp; /* virtual device type (output) */
+ u8 vrdcvsta; /* virtual device status (output) */
+ u8 vrdcvfla; /* virtual device flags (output) */
+ u8 vrdcrccl; /* real device class (output) */
+ u8 vrdccrty; /* real device type (output) */
+ u8 vrdccrmd; /* real device model (output) */
+ u8 vrdccrft; /* real device feature (output) */
+} __attribute__((packed, aligned(4)));
+
+extern int diag210(struct diag210 *addr);
+
+#endif /* _ASM_S390_DIAG_H */
Index: quilt-2.6/include/asm-s390/pgalloc.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/pgalloc.h
+++ quilt-2.6/include/asm-s390/pgalloc.h
@@ -19,8 +19,6 @@
#define check_pgt_cache() do {} while (0)
-extern void diag10(unsigned long addr);
-
/*
* Page allocation orders.
*/
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 06/10] vmur: fix reference counting for vmur device structure
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (4 preceding siblings ...)
2007-08-22 12:36 ` [patch 05/10] vmur: fix diag14 exceptions with addresses > 2GB Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 07/10] disassembler: fix b2 opcodes like srst, bsg, and others Martin Schwidefsky
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390
Cc: Michael Holzheu, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 006-vmur-refcount.diff --]
[-- Type: text/plain, Size: 10295 bytes --]
From: Michael Holzheu <holzheu@de.ibm.com>
When a vmur device is removed due to a detach of the device, currently the
ur device structure is freed. Unfortunately it can happen, that there is
still a user of the device structure, when the character device is open
during the detach process. To fix this, reference counting for the vmur
structure is introduced.
In addition to that, the online, offline, probe and remove functions are
serialized now using a global mutex.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
drivers/s390/char/vmur.c | 218 ++++++++++++++++++++++++++++++++++-------------
drivers/s390/char/vmur.h | 1
2 files changed, 161 insertions(+), 58 deletions(-)
Index: quilt-2.6/drivers/s390/char/vmur.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/vmur.c
+++ quilt-2.6/drivers/s390/char/vmur.c
@@ -69,8 +69,26 @@ static struct ccw_driver ur_driver = {
.set_offline = ur_set_offline,
};
+static DEFINE_MUTEX(vmur_mutex);
+
/*
* Allocation, freeing, getting and putting of urdev structures
+ *
+ * Each ur device (urd) contains a reference to its corresponding ccw device
+ * (cdev) using the urd->cdev pointer. Each ccw device has a reference to the
+ * ur device using the cdev->dev.driver_data pointer.
+ *
+ * urd references:
+ * - ur_probe gets a urd reference, ur_remove drops the reference
+ * (cdev->dev.driver_data)
+ * - ur_open gets a urd reference, ur_relase drops the reference
+ * (urf->urd)
+ *
+ * cdev references:
+ * - urdev_alloc get a cdev reference (urd->cdev)
+ * - urdev_free drops the cdev reference (urd->cdev)
+ *
+ * Setting and clearing of cdev->dev.driver_data is protected by the ccwdev lock
*/
static struct urdev *urdev_alloc(struct ccw_device *cdev)
{
@@ -79,42 +97,61 @@ static struct urdev *urdev_alloc(struct
urd = kzalloc(sizeof(struct urdev), GFP_KERNEL);
if (!urd)
return NULL;
- urd->cdev = cdev;
urd->reclen = cdev->id.driver_info;
ccw_device_get_id(cdev, &urd->dev_id);
mutex_init(&urd->io_mutex);
mutex_init(&urd->open_mutex);
+ atomic_set(&urd->ref_count, 1);
+ urd->cdev = cdev;
+ get_device(&cdev->dev);
return urd;
}
static void urdev_free(struct urdev *urd)
{
+ TRACE("urdev_free: %p\n", urd);
+ if (urd->cdev)
+ put_device(&urd->cdev->dev);
kfree(urd);
}
-/*
- * This is how the character device driver gets a reference to a
- * ur device. When this call returns successfully, a reference has
- * been taken (by get_device) on the underlying kobject. The recipient
- * of this urdev pointer must eventually drop it with urdev_put(urd)
- * which does the corresponding put_device().
- */
+static void urdev_get(struct urdev *urd)
+{
+ atomic_inc(&urd->ref_count);
+}
+
+static struct urdev *urdev_get_from_cdev(struct ccw_device *cdev)
+{
+ struct urdev *urd;
+ unsigned long flags;
+
+ spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
+ urd = cdev->dev.driver_data;
+ if (urd)
+ urdev_get(urd);
+ spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
+ return urd;
+}
+
static struct urdev *urdev_get_from_devno(u16 devno)
{
char bus_id[16];
struct ccw_device *cdev;
+ struct urdev *urd;
sprintf(bus_id, "0.0.%04x", devno);
cdev = get_ccwdev_by_busid(&ur_driver, bus_id);
if (!cdev)
return NULL;
-
- return cdev->dev.driver_data;
+ urd = urdev_get_from_cdev(cdev);
+ put_device(&cdev->dev);
+ return urd;
}
static void urdev_put(struct urdev *urd)
{
- put_device(&urd->cdev->dev);
+ if (atomic_dec_and_test(&urd->ref_count))
+ urdev_free(urd);
}
/*
@@ -246,6 +283,7 @@ static void ur_int_handler(struct ccw_de
return;
}
urd = cdev->dev.driver_data;
+ BUG_ON(!urd);
/* On special conditions irb is an error pointer */
if (IS_ERR(irb))
urd->io_request_rc = PTR_ERR(irb);
@@ -263,9 +301,15 @@ static void ur_int_handler(struct ccw_de
static ssize_t ur_attr_reclen_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct urdev *urd = dev->driver_data;
+ struct urdev *urd;
+ int rc;
- return sprintf(buf, "%zu\n", urd->reclen);
+ urd = urdev_get_from_cdev(to_ccwdev(dev));
+ if (!urd)
+ return -ENODEV;
+ rc = sprintf(buf, "%zu\n", urd->reclen);
+ urdev_put(urd);
+ return rc;
}
static DEVICE_ATTR(reclen, 0444, ur_attr_reclen_show, NULL);
@@ -726,64 +770,63 @@ static struct file_operations ur_fops =
/*
* ccw_device infrastructure:
- * ur_probe gets its own ref to the device (i.e. get_device),
- * creates the struct urdev, the device attributes, sets up
- * the interrupt handler and validates the virtual unit record device.
- * ur_remove removes the device attributes, frees the struct urdev
- * and drops (put_device) the ref to the device we got in ur_probe.
+ * ur_probe creates the struct urdev (with refcount = 1), the device
+ * attributes, sets up the interrupt handler and validates the virtual
+ * unit record device.
+ * ur_remove removes the device attributes and drops the reference to
+ * struct urdev.
+ *
+ * ur_probe, ur_remove, ur_set_online and ur_set_offline are serialized
+ * by the vmur_mutex lock.
+ *
+ * urd->char_device is used as indication that the online function has
+ * been completed successfully.
*/
static int ur_probe(struct ccw_device *cdev)
{
struct urdev *urd;
int rc;
- TRACE("ur_probe: cdev=%p state=%d\n", cdev, *(int *) cdev->private);
-
- if (!get_device(&cdev->dev))
- return -ENODEV;
+ TRACE("ur_probe: cdev=%p\n", cdev);
+ mutex_lock(&vmur_mutex);
urd = urdev_alloc(cdev);
if (!urd) {
rc = -ENOMEM;
- goto fail;
+ goto fail_unlock;
}
+
rc = ur_create_attributes(&cdev->dev);
if (rc) {
rc = -ENOMEM;
- goto fail;
+ goto fail_urdev_put;
}
- cdev->dev.driver_data = urd;
cdev->handler = ur_int_handler;
/* validate virtual unit record device */
urd->class = get_urd_class(urd);
if (urd->class < 0) {
rc = urd->class;
- goto fail;
+ goto fail_remove_attr;
}
if ((urd->class != DEV_CLASS_UR_I) && (urd->class != DEV_CLASS_UR_O)) {
rc = -ENOTSUPP;
- goto fail;
+ goto fail_remove_attr;
}
+ spin_lock_irq(get_ccwdev_lock(cdev));
+ cdev->dev.driver_data = urd;
+ spin_unlock_irq(get_ccwdev_lock(cdev));
+ mutex_unlock(&vmur_mutex);
return 0;
-fail:
- urdev_free(urd);
- put_device(&cdev->dev);
- return rc;
-}
-
-static void ur_remove(struct ccw_device *cdev)
-{
- struct urdev *urd = cdev->dev.driver_data;
-
- TRACE("ur_remove\n");
- if (cdev->online)
- ur_set_offline(cdev);
+fail_remove_attr:
ur_remove_attributes(&cdev->dev);
- urdev_free(urd);
- put_device(&cdev->dev);
+fail_urdev_put:
+ urdev_put(urd);
+fail_unlock:
+ mutex_unlock(&vmur_mutex);
+ return rc;
}
static int ur_set_online(struct ccw_device *cdev)
@@ -792,20 +835,29 @@ static int ur_set_online(struct ccw_devi
int minor, major, rc;
char node_id[16];
- TRACE("ur_set_online: cdev=%p state=%d\n", cdev,
- *(int *) cdev->private);
+ TRACE("ur_set_online: cdev=%p\n", cdev);
- if (!try_module_get(ur_driver.owner))
- return -EINVAL;
+ mutex_lock(&vmur_mutex);
+ urd = urdev_get_from_cdev(cdev);
+ if (!urd) {
+ /* ur_remove already deleted our urd */
+ rc = -ENODEV;
+ goto fail_unlock;
+ }
+
+ if (urd->char_device) {
+ /* Another ur_set_online was faster */
+ rc = -EBUSY;
+ goto fail_urdev_put;
+ }
- urd = (struct urdev *) cdev->dev.driver_data;
minor = urd->dev_id.devno;
major = MAJOR(ur_first_dev_maj_min);
urd->char_device = cdev_alloc();
if (!urd->char_device) {
rc = -ENOMEM;
- goto fail_module_put;
+ goto fail_urdev_put;
}
cdev_init(urd->char_device, &ur_fops);
@@ -834,29 +886,79 @@ static int ur_set_online(struct ccw_devi
TRACE("ur_set_online: device_create rc=%d\n", rc);
goto fail_free_cdev;
}
-
+ urdev_put(urd);
+ mutex_unlock(&vmur_mutex);
return 0;
fail_free_cdev:
cdev_del(urd->char_device);
-fail_module_put:
- module_put(ur_driver.owner);
-
+ urd->char_device = NULL;
+fail_urdev_put:
+ urdev_put(urd);
+fail_unlock:
+ mutex_unlock(&vmur_mutex);
return rc;
}
-static int ur_set_offline(struct ccw_device *cdev)
+static int ur_set_offline_force(struct ccw_device *cdev, int force)
{
struct urdev *urd;
+ int rc;
- TRACE("ur_set_offline: cdev=%p cdev->private=%p state=%d\n",
- cdev, cdev->private, *(int *) cdev->private);
- urd = (struct urdev *) cdev->dev.driver_data;
+ TRACE("ur_set_offline: cdev=%p\n", cdev);
+ urd = urdev_get_from_cdev(cdev);
+ if (!urd)
+ /* ur_remove already deleted our urd */
+ return -ENODEV;
+ if (!urd->char_device) {
+ /* Another ur_set_offline was faster */
+ rc = -EBUSY;
+ goto fail_urdev_put;
+ }
+ if (!force && (atomic_read(&urd->ref_count) > 2)) {
+ /* There is still a user of urd (e.g. ur_open) */
+ TRACE("ur_set_offline: BUSY\n");
+ rc = -EBUSY;
+ goto fail_urdev_put;
+ }
device_destroy(vmur_class, urd->char_device->dev);
cdev_del(urd->char_device);
- module_put(ur_driver.owner);
+ urd->char_device = NULL;
+ rc = 0;
- return 0;
+fail_urdev_put:
+ urdev_put(urd);
+ return rc;
+}
+
+static int ur_set_offline(struct ccw_device *cdev)
+{
+ int rc;
+
+ mutex_lock(&vmur_mutex);
+ rc = ur_set_offline_force(cdev, 0);
+ mutex_unlock(&vmur_mutex);
+ return rc;
+}
+
+static void ur_remove(struct ccw_device *cdev)
+{
+ unsigned long flags;
+
+ TRACE("ur_remove\n");
+
+ mutex_lock(&vmur_mutex);
+
+ if (cdev->online)
+ ur_set_offline_force(cdev, 1);
+ ur_remove_attributes(&cdev->dev);
+
+ spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
+ urdev_put(cdev->dev.driver_data);
+ cdev->dev.driver_data = NULL;
+ spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
+
+ mutex_unlock(&vmur_mutex);
}
/*
Index: quilt-2.6/drivers/s390/char/vmur.h
===================================================================
--- quilt-2.6.orig/drivers/s390/char/vmur.h
+++ quilt-2.6/drivers/s390/char/vmur.h
@@ -70,6 +70,7 @@ struct urdev {
size_t reclen; /* Record length for *write* CCWs */
int class; /* VM device class */
int io_request_rc; /* return code from I/O request */
+ atomic_t ref_count; /* reference counter */
};
/*
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 07/10] disassembler: fix b2 opcodes like srst, bsg, and others
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (5 preceding siblings ...)
2007-08-22 12:36 ` [patch 06/10] vmur: fix reference counting for vmur device structure Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 08/10] hypfs: inode corruption due to missing locking Martin Schwidefsky
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390
Cc: Christian Borntraeger, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 007-disasm.diff --]
[-- Type: text/plain, Size: 1151 bytes --]
From: Christian Borntraeger <borntraeger@de.ibm.com>
The instruction table for b2 opcodes was missing an opfrag value
for the cpya instruction. All instructions specified after cpya
were not considered by the disassembler. The fix is simple and
obvious - add the opfrag field to the cpya instruction.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
arch/s390/kernel/dis.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: quilt-2.6/arch/s390/kernel/dis.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/dis.c
+++ quilt-2.6/arch/s390/kernel/dis.c
@@ -577,7 +577,7 @@ static struct insn opcode_b2[] = {
{ "esta", 0x4a, INSTR_RRE_RR },
{ "lura", 0x4b, INSTR_RRE_RR },
{ "tar", 0x4c, INSTR_RRE_AR },
- { "cpya", INSTR_RRE_AA },
+ { "cpya", 0x4d, INSTR_RRE_AA },
{ "sar", 0x4e, INSTR_RRE_AR },
{ "ear", 0x4f, INSTR_RRE_RA },
{ "csp", 0x50, INSTR_RRE_RR },
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 08/10] hypfs: inode corruption due to missing locking
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (6 preceding siblings ...)
2007-08-22 12:36 ` [patch 07/10] disassembler: fix b2 opcodes like srst, bsg, and others Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 09/10] kprobes: fix instruction length calculation Martin Schwidefsky
2007-08-22 12:36 ` [patch 10/10] Change atomic_read/set to inline functions with barrier semantics Martin Schwidefsky
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390
Cc: Michael Holzheu, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 008-hypfs.diff --]
[-- Type: text/plain, Size: 3142 bytes --]
From: Michael Holzheu <holzheu@de.ibm.com>
hypfs removes the whole hypfs directory tree and creates a new one, when a
process triggers an update by writing to the "update" attribute. When removing
and creating files, it is necessary to lock the inode of the parent directory
where the files live. Currently hypfs does not lock the parent inode, which
can lead to inode corruption. This patch:
* Introduces correct locking
* Fixes i_nlink reference counting for inodes, when creating directories
* Adds info printk, when hypfs filesystem has been mounted
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
arch/s390/hypfs/inode.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
Index: quilt-2.6/arch/s390/hypfs/inode.c
===================================================================
--- quilt-2.6.orig/arch/s390/hypfs/inode.c
+++ quilt-2.6/arch/s390/hypfs/inode.c
@@ -60,17 +60,28 @@ static void hypfs_add_dentry(struct dent
hypfs_last_dentry = dentry;
}
+static inline int hypfs_positive(struct dentry *dentry)
+{
+ return dentry->d_inode && !d_unhashed(dentry);
+}
+
static void hypfs_remove(struct dentry *dentry)
{
struct dentry *parent;
parent = dentry->d_parent;
- if (S_ISDIR(dentry->d_inode->i_mode))
- simple_rmdir(parent->d_inode, dentry);
- else
- simple_unlink(parent->d_inode, dentry);
+ if (!parent || !parent->d_inode)
+ return;
+ mutex_lock(&parent->d_inode->i_mutex);
+ if (hypfs_positive(dentry)) {
+ if (S_ISDIR(dentry->d_inode->i_mode))
+ simple_rmdir(parent->d_inode, dentry);
+ else
+ simple_unlink(parent->d_inode, dentry);
+ }
d_delete(dentry);
dput(dentry);
+ mutex_unlock(&parent->d_inode->i_mutex);
}
static void hypfs_delete_tree(struct dentry *root)
@@ -315,6 +326,7 @@ static int hypfs_fill_super(struct super
}
hypfs_update_update(sb);
sb->s_root = root_dentry;
+ printk(KERN_INFO "hypfs: Hypervisor filesystem mounted\n");
return 0;
err_tree:
@@ -356,13 +368,17 @@ static struct dentry *hypfs_create_file(
qname.name = name;
qname.len = strlen(name);
qname.hash = full_name_hash(name, qname.len);
+ mutex_lock(&parent->d_inode->i_mutex);
dentry = lookup_one_len(name, parent, strlen(name));
- if (IS_ERR(dentry))
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(dentry)) {
+ dentry = ERR_PTR(-ENOMEM);
+ goto fail;
+ }
inode = hypfs_make_inode(sb, mode);
if (!inode) {
dput(dentry);
- return ERR_PTR(-ENOMEM);
+ dentry = ERR_PTR(-ENOMEM);
+ goto fail;
}
if (mode & S_IFREG) {
inode->i_fop = &hypfs_file_ops;
@@ -379,6 +395,8 @@ static struct dentry *hypfs_create_file(
inode->i_private = data;
d_instantiate(dentry, inode);
dget(dentry);
+fail:
+ mutex_unlock(&parent->d_inode->i_mutex);
return dentry;
}
@@ -391,7 +409,6 @@ struct dentry *hypfs_mkdir(struct super_
if (IS_ERR(dentry))
return dentry;
hypfs_add_dentry(dentry);
- parent->d_inode->i_nlink++;
return dentry;
}
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 09/10] kprobes: fix instruction length calculation
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (7 preceding siblings ...)
2007-08-22 12:36 ` [patch 08/10] hypfs: inode corruption due to missing locking Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
2007-08-22 12:36 ` [patch 10/10] Change atomic_read/set to inline functions with barrier semantics Martin Schwidefsky
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390; +Cc: David Wilder, Martin Schwidefsky, Heiko Carstens
[-- Attachment #1: 009-kprobe-iln.diff --]
[-- Type: text/plain, Size: 1438 bytes --]
From: David Wilder <dwilder@us.ibm.com>
Placing a kprobe on "bc" instruction (s390/s390x) can cause an oops.
The instruction length is encoded into the first two bits of the s390
instruction. Kprobe is incorrectly computing the instruction length.
The instruction length is used for determining what type of "fix-up" is
needed for conditional branch instruction. The problem can bee seen by
placing a kprobe on a "bc" instruction that will not branch. The
results is that Kprobe incorrectly computes the new instruction
pointer (psw.addr) after single stepping the instruction. The problem
is corrected with this patch.
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
arch/s390/kernel/kprobes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: quilt-2.6/arch/s390/kernel/kprobes.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/kprobes.c
+++ quilt-2.6/arch/s390/kernel/kprobes.c
@@ -85,7 +85,7 @@ void __kprobes get_instruction_type(stru
ainsn->reg = (*ainsn->insn & 0xf0) >> 4;
/* save the instruction length (pop 5-5) in bytes */
- switch (*(__u8 *) (ainsn->insn) >> 4) {
+ switch (*(__u8 *) (ainsn->insn) >> 6) {
case 0:
ainsn->ilen = 2;
break;
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread* [patch 10/10] Change atomic_read/set to inline functions with barrier semantics.
2007-08-22 12:36 [patch 00/10] s390 patches for 2.6.23-rc3 Martin Schwidefsky
` (8 preceding siblings ...)
2007-08-22 12:36 ` [patch 09/10] kprobes: fix instruction length calculation Martin Schwidefsky
@ 2007-08-22 12:36 ` Martin Schwidefsky
9 siblings, 0 replies; 11+ messages in thread
From: Martin Schwidefsky @ 2007-08-22 12:36 UTC (permalink / raw)
To: linux-kernel, linux-s390; +Cc: Heiko Carstens, Martin Schwidefsky
[-- Attachment #1: 010-atomic_t.diff --]
[-- Type: text/plain, Size: 1870 bytes --]
From: Heiko Carstens <heiko.carstens@de.ibm.com>
After doing some tests this seems to be the best variant for s390 and
should be correct as well. With gcc 4.2.1 we get the following kernel
image sizes using the default configuration:
atomic_t type volatile, atomic_read/set defines 5311824 bytes
atomic_t type int, atomic_read/set defines 5270864 bytes
atomic_t type int, atomic_read/set inline asm 5279056 bytes
atomic_t type int, atomic_read/set inline barrier 5270864 bytes
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
include/asm-s390/atomic.h | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
Index: quilt-2.6/include/asm-s390/atomic.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/atomic.h
+++ quilt-2.6/include/asm-s390/atomic.h
@@ -67,8 +67,17 @@ typedef struct {
#endif /* __GNUC__ */
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v,i) (((v)->counter) = (i))
+static inline int atomic_read(const atomic_t *v)
+{
+ barrier();
+ return v->counter;
+}
+
+static inline void atomic_set(atomic_t *v, int i)
+{
+ v->counter = i;
+ barrier();
+}
static __inline__ int atomic_add_return(int i, atomic_t * v)
{
@@ -182,8 +191,17 @@ typedef struct {
#endif /* __GNUC__ */
-#define atomic64_read(v) ((v)->counter)
-#define atomic64_set(v,i) (((v)->counter) = (i))
+static inline long long atomic64_read(const atomic64_t *v)
+{
+ barrier();
+ return v->counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+ v->counter = i;
+ barrier();
+}
static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
{
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
^ permalink raw reply [flat|nested] 11+ messages in thread