From: Grant Grundler <grundler@parisc-linux.org>
To: Matthew Wilcox <matthew@wil.cx>
Cc: linux-pci@atrey.karlin.mff.cuni.cz, linux-kernel@vger.kernel.org,
Robert Hancock <hancockr@shaw.ca>,
Jesse Barnes <jesse.barnes@intel.com>, Greg KH <greg@kroah.com>
Subject: Re: [PATCH] Fix boot-time hang on G31/G33 PC
Date: Tue, 28 Aug 2007 11:59:08 -0600 [thread overview]
Message-ID: <20070828175908.GD19224@colo.lackof.org> (raw)
In-Reply-To: <20070826015556.GC14130@parisc-linux.org>
On Sat, Aug 25, 2007 at 07:55:56PM -0600, Matthew Wilcox wrote:
>
> This patch, loosely based on a patch from Robert Hancock, which was in
> turn based on a patch from Jesse Barnes, fixes a boot-time hang on my
> shiny new PC. The 'conflict' mentioned in the patch in my case happens
> to be between mmconfig and the graphics card, but it could easily be
> between any pair of devices if they are left enabled by the BIOS and
> mappen in the wrong place.
This issue has come up before:
http://www.uwsg.indiana.edu/hypermail/linux/kernel/0212.2/0232.html
and Ivan Kokshaysky suggested a very similar patch:
http://www.uwsg.indiana.edu/hypermail/linux/kernel/0212.2/0324.html
cheers,
grant
>
> Signed-off-by: Matthew Wilcox <matthew@wil.cx>
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 34b8dae..51ef450 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -180,11 +180,26 @@ static inline int is_64bit_memory(u32 mask)
> return 0;
> }
>
> +/*
> + * Sizing PCI BARs requires us to disable decoding, otherwise we may run
> + * into conflicts with other devices while trying to size the BAR. Normally
> + * this isn't a problem, but it happens on some machines normally, and can
> + * happen on others during PCI device hotplug. Don't disable BARs for host
> + * bridges, though. Some of them do silly things like disable accesses to
> + * RAM from the CPU
> + */
> static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
> {
> unsigned int pos, reg, next;
> u32 l, sz;
> struct resource *res;
> + u16 orig_cmd;
> +
> + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_HOST) {
> + pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
> + pci_write_config_word(dev, PCI_COMMAND,
> + orig_cmd & ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
> + }
>
> for(pos=0; pos<howmany; pos = next) {
> u64 l64;
> @@ -283,6 +298,9 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
> }
> }
> }
> +
> + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_HOST)
> + pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
> }
>
> void __devinit pci_read_bridge_bases(struct pci_bus *child)
>
> --
> "Bill, look, we understand that you're interested in selling us this
> operating system, but compare it to ours. We can't possibly take such
> a retrograde step."
next prev parent reply other threads:[~2007-08-28 17:59 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-26 1:55 [PATCH] Fix boot-time hang on G31/G33 PC Matthew Wilcox
2007-08-26 4:24 ` Robert Hancock
2007-08-26 12:55 ` Matthew Wilcox
2007-08-26 14:07 ` Matthew Wilcox
2007-08-26 17:59 ` Robert Hancock
2007-08-28 17:22 ` Jesse Barnes
2007-08-28 17:59 ` Grant Grundler [this message]
2007-08-28 18:28 ` Grant Grundler
2007-09-26 21:18 ` PCI: " Greg KH
2007-09-26 21:55 ` Jesse Barnes
2007-09-26 21:56 ` Greg KH
2007-09-26 22:20 ` Jesse Barnes
2007-09-26 23:04 ` Robert Hancock
2007-09-27 14:31 ` Ivan Kokshaysky
2007-09-27 18:36 ` Kok, Auke
2007-09-27 23:13 ` Greg KH
2007-10-12 14:26 ` Vitaliy Gusev
2007-10-12 17:07 ` Kok, Auke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070828175908.GD19224@colo.lackof.org \
--to=grundler@parisc-linux.org \
--cc=greg@kroah.com \
--cc=hancockr@shaw.ca \
--cc=jesse.barnes@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox