From: "Andreas Herrmann" <andreas.herrmann3@amd.com>
To: "Andi Kleen" <ak@suse.de>
Cc: "Robert Richter" <robert.richter@amd.com>,
patches@x86-64.org, linux-kernel@vger.kernel.org
Subject: Re: [patches] [patch 3/5] x86: Add PCI extended config space access for AMD Barcelona
Date: Mon, 3 Sep 2007 10:32:42 +0200 [thread overview]
Message-ID: <20070903083242.GA22144@alberich.amd.com> (raw)
In-Reply-To: <200709011211.52167.ak@suse.de>
On Sat, Sep 01, 2007 at 12:11:52PM +0200, Andi Kleen wrote:
> On Thursday 30 August 2007 19:43:14 Robert Richter wrote:
> > This patch implements PCI extended configuration space access for
> > AMD's Barcelona CPUs. It extends the method using CF8/CFC IO
> > addresses. An x86 capability bit has been introduced that is set for
> > CPUs supporting PCI extended config space accesses.
>
> We shouldn't need this because extended config space should work
> here and Linux should use it
> (especially after we added the ugly Barcelona workaround into that code)
This patch is needed for all buggy BIOSes that don't correctly set up MCFG.
> The only exception would be if the user disables MMCONFIG in CONFIG, but that's
> their own fault then.
No, as you stated yourself there are two exceptions. And the more serious one is the
BIOS issue.
> Ok there might be buggy BIOS around with no or no usable MCFG table, but since
> extended config space is not really a critical feature that's not a big issue.
Not sure why you assume extended config space (ECS) is not critical.
Ok, for a lot of stuff it does not matter.
But it is needed for some devices for full functionality.
E.g. for perfmon (family 0x10/extended inerrupts) extended config space access
is a prerequisite.
> So I don't think we want this special case code at all and should
> just rely on MMCONFIG.
Rely on something unreliable (due to buggy/incomplete BIOS)?
I don't think we should do this.
IMHO it is best to try to use MMCONFIG if it's working and to use
a fallback (e.g. CF8 ECS access for family 0x10) if available.
Regards,
Andreas
--
Operating | AMD Saxony Limited Liability Company & Co. KG,
System | Wilschdorfer Landstr. 101, 01109 Dresden, Germany
Research | Register Court Dresden: HRA 4896, General Partner authorized
Center | to represent: AMD Saxony LLC (Wilmington, Delaware, US)
(OSRC) | General Manager of AMD Saxony LLC: Dr. Hans-R. Deppe, Thomas McCoy
next prev parent reply other threads:[~2007-09-03 8:33 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20070830174311.221133000@amd.com>
[not found] ` <20070830174311.536394000@amd.com>
2007-09-01 10:11 ` [patch 3/5] x86: Add PCI extended config space access for AMD Barcelona Andi Kleen
2007-09-03 8:32 ` Andreas Herrmann [this message]
2007-09-03 10:15 ` [patches] " Andi Kleen
2007-09-03 11:27 ` Robert Richter
2007-09-03 12:48 ` Andi Kleen
2007-09-03 14:48 ` Robert Richter
2007-09-03 15:24 ` Andi Kleen
2007-09-04 6:54 ` Yinghai Lu
2007-09-04 7:20 ` Andi Kleen
2007-09-03 11:31 ` Andreas Herrmann
2007-09-03 12:52 ` Andi Kleen
[not found] ` <20070830174311.344418000@amd.com>
2007-09-01 10:14 ` [patch 1/5] x86: Add AMD64 Barcelona PMU MSR definitions Andi Kleen
2007-09-03 8:17 [patch 0/5] (resent) x86: PCI extended config space access on AMD Barcelona CPUs Robert Richter
2007-09-03 8:17 ` [patch 3/5] x86: Add PCI extended config space access for AMD Barcelona Robert Richter
2007-09-03 8:31 ` Arjan van de Ven
2007-09-03 9:17 ` [patches] " Andreas Herrmann
2007-09-03 11:33 ` Arjan van de Ven
2007-09-03 15:47 ` Andreas Herrmann
2007-09-05 5:58 ` H. Peter Anvin
2007-09-05 8:44 ` Robert Richter
2007-09-05 10:12 ` H. Peter Anvin
2007-09-05 10:35 ` Robert Richter
2007-09-05 11:05 ` Arne Georg Gleditsch
2007-09-05 16:13 ` Andreas Herrmann
2007-09-05 22:42 ` Yinghai Lu
2007-09-06 8:31 ` Arne Georg Gleditsch
2007-09-06 9:48 ` H. Peter Anvin
2007-09-06 17:41 ` Jesse Barnes
2007-09-06 17:50 ` Yinghai Lu
2007-09-06 17:48 ` Jesse Barnes
2007-09-06 17:48 ` Yinghai Lu
2007-09-05 15:00 ` Andreas Herrmann
2007-09-06 10:14 ` Arjan van de Ven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070903083242.GA22144@alberich.amd.com \
--to=andreas.herrmann3@amd.com \
--cc=ak@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@x86-64.org \
--cc=robert.richter@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox