public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
To: akpm@linux-foundation.org, linux-kernel@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>,
	Christoph Hellwig <hch@infradead.org>
Subject: [patch 6/8] Immediate Values - Powerpc Optimization
Date: Thu, 06 Sep 2007 16:02:34 -0400	[thread overview]
Message-ID: <20070906200315.658789317@polymtl.ca> (raw)
In-Reply-To: 20070906200228.086651361@polymtl.ca

[-- Attachment #1: immediate-values-powerpc-optimization.patch --]
[-- Type: text/plain, Size: 8387 bytes --]

PowerPC optimization of the immediate values which uses a li instruction,
patched with an immediate value.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Christoph Hellwig <hch@infradead.org>
---
 arch/powerpc/kernel/Makefile    |    1 
 arch/powerpc/kernel/immediate.c |  103 ++++++++++++++++++++++++++++++++
 include/asm-powerpc/immediate.h |  127 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 231 insertions(+)

Index: linux-2.6-lttng/include/asm-powerpc/immediate.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-lttng/include/asm-powerpc/immediate.h	2007-09-04 12:12:12.000000000 -0400
@@ -0,0 +1,127 @@
+#ifndef _ASM_POWERPC_IMMEDIATE_H
+#define _ASM_POWERPC_IMMEDIATE_H
+
+/*
+ * Immediate values. PowerPC architecture optimizations.
+ *
+ * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#include <asm/asm-compat.h>
+
+struct module;
+
+struct __immediate {
+	long var;		/* Identifier variable of the immediate value */
+	long immediate;		/*
+				 * Pointer to the memory location that holds
+				 * the immediate value within the load immediate
+				 * instruction.
+				 */
+	long size;		/* Type size. */
+};
+
+/**
+ * immediate_read - read immediate variable
+ * @var: pointer of type immediate_*_t
+ *
+ * Reads the value of @var.
+ * Optimized version of the immediate.
+ * Do not use in __init and __exit functions. Use _immediate_read() instead.
+ * Makes sure the 2 bytes update will be atomic by aligning the immediate
+ * value. Use a normal memory read for the 4 bytes immediate because there is no
+ * way to atomically update it without using a seqlock read side, which would
+ * cost more in term of total i-cache and d-cache space than a simple memory
+ * read.
+ */
+#define immediate_read(var)						\
+	({								\
+		__typeof__((var)->value) value;				\
+		switch (sizeof(value)) {				\
+		case 1:							\
+			asm (	".section __immediate, \"a\", @progbits;\n\t" \
+					PPC_LONG "%1, ((0f)+3), 1;\n\t"	\
+					".previous;\n\t"		\
+					"0:\n\t"			\
+					"li %0,%2;\n\t"			\
+				: "=r" (value)				\
+				: "i" (&(var)->value),			\
+				  "i" (0));				\
+			break;						\
+		case 2:							\
+			asm (	".section __immediate, \"a\", @progbits;\n\t" \
+					PPC_LONG "%1, ((0f)+2), 2;\n\t"	\
+					".previous;\n\t"		\
+					".align 2\n\t"			\
+					"0:\n\t"			\
+					"li %0,%2;\n\t"			\
+				: "=r" (value)				\
+				: "i" (&(var)->value),			\
+				  "i" (0));				\
+			break;						\
+		default:						\
+			value = (var)->value;				\
+			break;						\
+		};							\
+		value;							\
+	})
+
+/**
+ * immediate_set - set immediate variable (with locking)
+ * @var: pointer of type immediate_*_t
+ * @i: required value
+ *
+ * Sets the value of @var, taking the module_mutex if required by
+ * the architecture.
+ */
+#define immediate_set(var, i) \
+	(var)->value = (i); \
+	immediate_update(1);
+
+/**
+ * _immediate_set - set immediate variable (without locking)
+ * @var: pointer of type immediate_*_t
+ * @i: required value
+ *
+ * Sets the value of @var. Must be called with module_mutex held.
+ */
+#define _immediate_set(var, i) \
+	(var)->value = (i); \
+	immediate_update(0);
+
+/**
+ * immediate_set_early - set immediate variable at early boot
+ * @var: pointer of type immediate_*_t
+ * @i: required value
+ *
+ * Sets the value of @var. Should be used for early boot updates.
+ */
+#define immediate_set_early(var, i) \
+	(var)->value = (i); \
+	immediate_update_early();
+
+/**
+ * immediate_if - if () statement depending on an immediate value
+ * @var: pointer of type immediate_*_t
+ *
+ * Use as an if () statement depending on an immediate value.
+ * Do not use in __init and __exit functions. Use _immediate_if() instead.
+ * Branch depending on an immediate value. Could eventually be optimized further
+ * by improving gcc to give the ability to patch a jump instruction instead of
+ * the value it depends on.
+ */
+#define immediate_if(var)	if (unlikely(immediate_read(var)))
+
+/*
+ * Internal update functions.
+ */
+extern void immediate_update(int lock);
+extern void module_immediate_setup(struct module *mod);
+extern void immediate_update_early(void);
+extern int arch_immediate_update(const struct __immediate *immediate);
+extern void arch_immediate_update_early(const struct __immediate *immediate);
+
+#endif /* _ASM_POWERPC_IMMEDIATE_H */
Index: linux-2.6-lttng/arch/powerpc/kernel/Makefile
===================================================================
--- linux-2.6-lttng.orig/arch/powerpc/kernel/Makefile	2007-09-04 11:52:37.000000000 -0400
+++ linux-2.6-lttng/arch/powerpc/kernel/Makefile	2007-09-04 12:12:12.000000000 -0400
@@ -97,3 +97,4 @@ obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-$(CONFIG_PPC64)		+= entry_64.o
+obj-$(CONFIG_IMMEDIATE)		+= immediate.o
Index: linux-2.6-lttng/arch/powerpc/kernel/immediate.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-lttng/arch/powerpc/kernel/immediate.c	2007-09-04 12:12:12.000000000 -0400
@@ -0,0 +1,103 @@
+/*
+ * Powerpc optimized immediate values enabling/disabling.
+ *
+ * Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ */
+
+#include <linux/module.h>
+#include <linux/immediate.h>
+#include <linux/string.h>
+#include <linux/kprobes.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+#define LI_OPCODE_LEN	2
+
+/**
+ * arch_immediate_update - update one immediate value
+ * @immediate: pointer of type const struct __immediate to update
+ *
+ * Update one immediate value. Must be called with immediate_mutex held.
+ */
+int arch_immediate_update(const struct __immediate *immediate)
+{
+#ifdef CONFIG_KPROBES
+	kprobe_opcode_t *insn;
+	/*
+	 * Fail if a kprobe has been set on this instruction.
+	 * (TODO: we could eventually do better and modify all the (possibly
+	 * nested) kprobes for this site if kprobes had an API for this.
+	 */
+	switch (immediate->size) {
+		case 1:	/* The uint8_t points to the 3rd byte of the
+			 * instruction */
+			insn = (void*)(immediate->immediate - 1 - LI_OPCODE_LEN);
+			break;
+		case 2:	insn = (void*)(immediate->immediate - LI_OPCODE_LEN);
+			break;
+		default:
+		return -EINVAL;
+	}
+
+	if (unlikely(*insn == BREAKPOINT_INSTRUCTION)) {
+		printk(KERN_WARNING "Immediate value in conflict with kprobe. "
+				    "Variable at %p, "
+				    "instruction at %p, size %lu\n",
+				    (void*)immediate->immediate,
+				    (void*)immediate->var, immediate->size);
+		return -EBUSY;
+	}
+#endif
+
+	/*
+	 * If the variable and the instruction have the same value, there is
+	 * nothing to do.
+	 */
+	switch (immediate->size) {
+		case 1:	if (*(uint8_t*)immediate->immediate
+					== *(uint8_t*)immediate->var)
+				return 0;
+			break;
+		case 2:	if (*(uint16_t*)immediate->immediate
+					== *(uint16_t*)immediate->var)
+				return 0;
+			break;
+		default:return -EINVAL;
+	}
+	memcpy((void*)immediate->immediate, (void*)immediate->var,
+			immediate->size);
+	flush_icache_range((unsigned long)immediate->immediate,
+				immediate->size);
+	return 0;
+}
+
+/**
+ * arch_immediate_update_early - update one immediate value at boot time
+ * @immediate: pointer of type const struct __immediate to update
+ *
+ * Update one immediate value at boot time.
+ * We can use flush_icache_range, since the cpu identification has been done in
+ * the early_init stage.
+ */
+void __init arch_immediate_update_early(const struct __immediate *immediate)
+{
+	/*
+	 * If the variable and the instruction have the same value, there is
+	 * nothing to do.
+	 */
+	switch (immediate->size) {
+		case 1:	if (*(uint8_t*)immediate->immediate
+					== *(uint8_t*)immediate->var)
+				return;
+			break;
+		case 2:	if (*(uint16_t*)immediate->immediate
+					== *(uint16_t*)immediate->var)
+				return;
+			break;
+		default:return;
+	}
+	memcpy((void*)immediate->immediate, (void*)immediate->var,
+			immediate->size);
+	flush_icache_range((unsigned long)immediate->immediate,
+				immediate->size);
+}

-- 
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

  parent reply	other threads:[~2007-09-06 20:06 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-06 20:02 [patch 0/8] Immediate Values for 2.6.23-rc4-mm1 Mathieu Desnoyers
2007-09-06 20:02 ` [patch 1/8] Immediate Values - Global Modules List and Module Mutex Mathieu Desnoyers
2007-09-08  7:28   ` Alexey Dobriyan
2007-09-10 23:53     ` Rusty Russell
2007-09-11  0:45       ` Mathieu Desnoyers
2007-09-11  5:18         ` Rusty Russell
2007-09-11 14:27           ` Mathieu Desnoyers
2007-09-13  5:47             ` Rusty Russell
2007-09-13 21:21               ` Mathieu Desnoyers
2007-09-13 23:15                 ` Rusty Russell
2007-09-14 15:32                   ` Mathieu Desnoyers
2007-09-17 22:54                     ` Rusty Russell
2007-09-18 13:41                       ` Mathieu Desnoyers
2007-09-20 12:29                         ` Rusty Russell
2007-09-21 13:37                           ` Mathieu Desnoyers
2007-09-22  7:15                             ` Rusty Russell
2007-09-06 20:02 ` [patch 2/8] Immediate Values - Architecture Independent Code Mathieu Desnoyers
2007-09-06 20:02 ` [patch 3/8] Immediate Values - Kconfig menu in EMBEDDED Mathieu Desnoyers
2007-09-07  6:49   ` Andi Kleen
2007-09-07 12:46     ` Mathieu Desnoyers
2007-09-07 22:39       ` Andi Kleen
2007-09-11 20:22         ` Mathieu Desnoyers
2007-09-12 12:42           ` Andi Kleen
2007-09-06 20:02 ` [patch 4/8] Immediate Values - Move Kprobes i386 restore_interrupt to kdebug.h Mathieu Desnoyers
2007-09-07 10:31   ` Ananth N Mavinakayanahalli
2007-09-06 20:02 ` [patch 5/8] Immediate Values - i386 Optimization Mathieu Desnoyers
2007-09-06 20:02 ` Mathieu Desnoyers [this message]
2007-09-06 20:02 ` [patch 7/8] Immediate Values Powerpc Optimization Fix Mathieu Desnoyers
2007-09-06 20:02 ` [patch 8/8] Immediate Values - Documentation Mathieu Desnoyers
2007-09-06 21:20   ` Randy Dunlap
2007-09-07 12:23     ` Mathieu Desnoyers
2007-09-07 14:24       ` Randy Dunlap
  -- strict thread matches above, loose matches on Subject: below --
2007-11-13 18:58 [patch 0/8] Immediate Values (now with merged x86 support) Mathieu Desnoyers
2007-11-13 18:58 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2007-08-27 15:59 [patch 0/8] Immediate Values Mathieu Desnoyers
2007-08-27 15:59 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2007-08-20 20:23 [patch 0/8] Immediate Values Mathieu Desnoyers
2007-08-20 20:24 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers
2007-08-12 15:07 [patch 0/8] Immediate Values Mathieu Desnoyers
2007-08-12 15:07 ` [patch 6/8] Immediate Values - Powerpc Optimization Mathieu Desnoyers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070906200315.658789317@polymtl.ca \
    --to=mathieu.desnoyers@polymtl.ca \
    --cc=akpm@linux-foundation.org \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox