From: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
To: perex@suse.cz, linux-kernel@vger.kernel.org, akpm@linux-foundation.org
Subject: [PATCH 2/4] ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry
Date: Tue, 11 Sep 2007 23:08:19 +0200 [thread overview]
Message-ID: <20070911210819.GH8592@traven> (raw)
In-Reply-To: <20070911205632.GF8592@traven>
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of
list_for_each
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
--
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 2faf009..d69b11d 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -843,10 +843,9 @@ static void snd_es1968_bob_dec(struct es1968 *chip)
snd_es1968_bob_stop(chip);
else if (chip->bob_freq > ESM_BOB_FREQ) {
/* check reduction of timer frequency */
- struct list_head *p;
int max_freq = ESM_BOB_FREQ;
- list_for_each(p, &chip->substream_list) {
- struct esschan *es = list_entry(p, struct esschan, list);
+ struct esschan *es;
+ list_for_each_entry(es, &chip->substream_list, list) {
if (max_freq < es->bob_freq)
max_freq = es->bob_freq;
}
@@ -1316,12 +1315,11 @@ static struct snd_pcm_hardware snd_es1968_capture = {
static int calc_available_memory_size(struct es1968 *chip)
{
- struct list_head *p;
int max_size = 0;
-
+ struct esm_memory *buf;
+
mutex_lock(&chip->memory_mutex);
- list_for_each(p, &chip->buf_list) {
- struct esm_memory *buf = list_entry(p, struct esm_memory, list);
+ list_for_each_entry(buf, &chip->buf_list, list) {
if (buf->empty && buf->buf.bytes > max_size)
max_size = buf->buf.bytes;
}
@@ -1335,12 +1333,10 @@ static int calc_available_memory_size(struct es1968 *chip)
static struct esm_memory *snd_es1968_new_memory(struct es1968 *chip, int size)
{
struct esm_memory *buf;
- struct list_head *p;
-
+
size = ALIGN(size, ESM_MEM_ALIGN);
mutex_lock(&chip->memory_mutex);
- list_for_each(p, &chip->buf_list) {
- buf = list_entry(p, struct esm_memory, list);
+ list_for_each_entry(buf, &chip->buf_list, list) {
if (buf->empty && buf->buf.bytes >= size)
goto __found;
}
@@ -1938,10 +1934,9 @@ static irqreturn_t snd_es1968_interrupt(int irq, void *dev_id)
}
if (event & ESM_SOUND_IRQ) {
- struct list_head *p;
+ struct esschan *es;
spin_lock(&chip->substream_lock);
- list_for_each(p, &chip->substream_list) {
- struct esschan *es = list_entry(p, struct esschan, list);
+ list_for_each_entry(es, &chip->substream_list, list) {
if (es->running)
snd_es1968_update_pcm(chip, es);
}
@@ -2345,7 +2340,7 @@ static int es1968_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct es1968 *chip = card->private_data;
- struct list_head *p;
+ struct esschan *es;
if (! chip->do_pm)
return 0;
@@ -2374,8 +2369,7 @@ static int es1968_resume(struct pci_dev *pci)
/* restore ac97 state */
snd_ac97_resume(chip->ac97);
- list_for_each(p, &chip->substream_list) {
- struct esschan *es = list_entry(p, struct esschan, list);
+ list_for_each_entry(es, &chip->substream_list, list) {
switch (es->mode) {
case ESM_MODE_PLAY:
snd_es1968_playback_setup(chip, es, es->substream->runtime);
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
Insanity: doing the same thing over and over
again and expecting different results
(Albert Einstein)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
next prev parent reply other threads:[~2007-09-11 21:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-11 20:56 [PATCH 0/4] Several sound drivers: Use list_for_each_entry(_safe) Matthias Kaehlcke
2007-09-11 21:05 ` [PATCH 1/4] Generic AC97 mixer/modem (OSS): Use list_for_each_entry Matthias Kaehlcke
2007-09-11 21:08 ` Matthias Kaehlcke [this message]
2007-09-11 21:10 ` [PATCH 3/4] Intel HD Audio: Use list_for_each_entry(_safe) Matthias Kaehlcke
2007-09-11 21:12 ` [PATCH 4/4] Routines for effect processor FX8010: Use list_for_each_entry Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070911210819.GH8592@traven \
--to=matthias.kaehlcke@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox