From: Yinghai Lu <Yinghai.Lu@Sun.COM>
To: Andrew Morton <akpm@linux-foundation.org>,
Andi Kleen <ak@suse.de>, Greg KH <greg@kroah.com>,
Jeff Garzik <jeff@garzik.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86_64: check MSR to get MMCONFIG for AMD Family 10h Opteron
Date: Wed, 12 Sep 2007 12:31:22 -0700 [thread overview]
Message-ID: <200709121231.23345.yinghai.lu@sun.com> (raw)
[PATCH] x86_64: check MSR to get MMCONFIG for AMD Family 10h Opteron
So even MCFG is not there, we still can use MMCONFIG.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Index: linux-2.6/arch/i386/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/i386/pci/mmconfig-shared.c 2007-09-12 10:18:09.000000000 -0700
+++ linux-2.6/arch/i386/pci/mmconfig-shared.c 2007-09-12 11:25:11.000000000 -0700
@@ -133,33 +133,79 @@
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
}
+static const char __init *pci_mmcfg_amd_fam10h(void)
+{
+ u32 low, high, address;
+ u64 base;
+ int i;
+ unsigned segnbits = 0, busnbits;
+
+ address = 0xc0010058;
+ if (rdmsr_safe(address, &low, &high))
+ return NULL;
+
+ /* mmconfig is not enable */
+ if (!(low & 1))
+ return NULL;
+
+ base = high & 0xffff;
+ base <<= 32;
+
+ busnbits = (low >> 2) & 0x0f;
+ if (busnbits > 8) {
+ segnbits = busnbits - 8;
+ busnbits = 8;
+ }
+
+ pci_mmcfg_config_num = (1 << segnbits);
+ pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) * pci_mmcfg_config_num, GFP_KERNEL);
+ if (!pci_mmcfg_config)
+ return NULL;
+
+ for (i=0; i < (1 << segnbits); i++) {
+ pci_mmcfg_config[i].address = base + (1<<28) * i;
+ pci_mmcfg_config[i].pci_segment = i;
+ pci_mmcfg_config[i].start_bus_number = 0;
+ pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1;
+ }
+
+ return "AMD Family 10h NB";
+}
+
struct pci_mmcfg_hostbridge_probe {
+ u32 bus;
+ u32 devfn;
u32 vendor;
u32 device;
const char *(*probe)(void);
};
static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+ { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
+ { 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
+ { 0, PCI_DEVFN(0x18, 0), PCI_VENDOR_ID_AMD, 0x1200, pci_mmcfg_amd_fam10h },
+ { 0xff, PCI_DEVFN(0, 0), PCI_VENDOR_ID_AMD, 0x1200, pci_mmcfg_amd_fam10h },
};
static int __init pci_mmcfg_check_hostbridge(void)
{
u32 l;
+ u32 bus, devfn;
u16 vendor, device;
int i;
const char *name;
- pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
- vendor = l & 0xffff;
- device = (l >> 16) & 0xffff;
-
pci_mmcfg_config_num = 0;
pci_mmcfg_config = NULL;
name = NULL;
for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+ bus = pci_mmcfg_probes[i].bus;
+ devfn = pci_mmcfg_probes[i].devfn;
+ pci_conf1_read(0, bus, devfn, 0, 4, &l);
+ vendor = l & 0xffff;
+ device = (l >> 16) & 0xffff;
+
if (pci_mmcfg_probes[i].vendor == vendor &&
pci_mmcfg_probes[i].device == device)
name = pci_mmcfg_probes[i].probe();
reply other threads:[~2007-09-12 19:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200709121231.23345.yinghai.lu@sun.com \
--to=yinghai.lu@sun.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=greg@kroah.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox