public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jeff Dike <jdike@addtoit.com>
To: Andrew Morton <akpm@osdl.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	uml-devel <user-mode-linux-devel@lists.sourceforge.net>,
	caker@linode.com
Subject: [PATCH 3/3] UML - Correctly handle skb allocation failures
Date: Wed, 26 Sep 2007 17:46:13 -0400	[thread overview]
Message-ID: <20070926214613.GA11547@c2.user-mode-linux.org> (raw)

Handle memory allocation failures when reading packets.

We have to read something from the host, even if we can't allocate any
memory.  If we don't, the host side of the device may fill up and stop
delivering interrupts because no new packets can be queued.

A single sk_buff is allocated whenever an MTU is seen which is larger
than any seen earlier.  This is used to read packets if there is a
memory allocation failure.

The large MTU check is done from eth_configure, which is called when a
interface is added to the system, and from uml_net_change_mtu, which
is called when an existing interface has its MTU changed.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
---
 arch/um/drivers/net_kern.c |   60 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

Index: linux-2.6.20/arch/um/drivers/net_kern.c
===================================================================
--- linux-2.6.20.orig/arch/um/drivers/net_kern.c	2007-09-26 16:48:21.000000000 -0400
+++ linux-2.6.20/arch/um/drivers/net_kern.c	2007-09-26 16:56:16.000000000 -0400
@@ -34,6 +34,48 @@ static inline void set_ether_mac(struct 
 static DEFINE_SPINLOCK(opened_lock);
 static LIST_HEAD(opened);
 
+/*
+ * The throwaway skb is used when we can't allocate an skb.  The
+ * packet is read into throwaway in order to get the data off the
+ * connection to the host.
+ * It is reallocated whenever an MTU is seen which is larger than
+ * anything seen before.  update_throwaway_skb is called from
+ * eth_configure for new interfaces and from uml_net_change_mtu for
+ * MTU changes on existing interfaces.
+ */
+static DEFINE_SPINLOCK(throwaway_lock);
+static struct sk_buff *throwaway;
+static int throwaway_max;
+
+static int update_throwaway_skb(int max)
+{
+	struct sk_buff *new;
+	int err = 0;
+
+	spin_lock(&throwaway_lock);
+
+	if (max <= throwaway_max)
+		goto out;
+
+	err = -ENOMEM;
+	new = dev_alloc_skb(max);
+	if (new == NULL)
+		goto out;
+
+	skb_put(new, max);
+
+	kfree_skb(throwaway);
+	throwaway = new;
+	throwaway_max = max;
+	err = 0;
+out:
+	spin_unlock(&throwaway_lock);
+
+	return err;
+}
+
+int npackets = 0;
+
 static int uml_net_rx(struct net_device *dev)
 {
 	struct uml_net_private *lp = dev->priv;
@@ -42,7 +84,14 @@ static int uml_net_rx(struct net_device 
 
 	/* If we can't allocate memory, try again next round. */
 	skb = dev_alloc_skb(lp->max_packet);
+	if ((++npackets % 100) == 0){
+		kfree_skb(skb);
+		skb = NULL;
+	}
+
 	if (skb == NULL) {
+		throwaway->dev = dev;
+		(*lp->read)(lp->fd, throwaway, lp);
 		lp->stats.rx_dropped++;
 		return 0;
 	}
@@ -240,6 +289,13 @@ static int uml_net_set_mac(struct net_de
 
 static int uml_net_change_mtu(struct net_device *dev, int new_mtu)
 {
+	struct uml_net_private *lp = dev->priv;
+	int err;
+
+	err = update_throwaway_skb(lp->max_packet);
+	if (err)
+		return err;
+
 	dev->mtu = new_mtu;
 
 	return 0;
@@ -447,6 +503,10 @@ static void eth_configure(int n, void *i
 	dev->watchdog_timeo = (HZ >> 1);
 	dev->irq = UM_ETH_IRQ;
 
+	err = update_throwaway_skb(lp->max_packet);
+	if (err)
+		goto out_undo_user_init;
+
 	rtnl_lock();
 	err = register_netdevice(dev);
 	rtnl_unlock();

             reply	other threads:[~2007-09-26 21:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-26 21:46 Jeff Dike [this message]
2007-09-26 22:10 ` [PATCH 3/3] UML - Correctly handle skb allocation failures Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070926214613.GA11547@c2.user-mode-linux.org \
    --to=jdike@addtoit.com \
    --cc=akpm@osdl.org \
    --cc=caker@linode.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=user-mode-linux-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox