Re: 2.6.23-rcX SG_GET_SCSI_ID regression?

[Joerg Platte <lists@naasa.net>]

Am Mittwoch, 3. Oktober 2007 schrieb Joerg Platte:
Hi,

> 2.6.22.8:
> open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3
> ioctl(3, SG_SET_TIMEOUT, 0xbfe40624)    = 0
> ioctl(3, SG_GET_VERSION_NUM, 0x8063fa4) = 0
> ioctl(3, SG_GET_SCSI_ID, 0xbfe405e0)    = 0
>
> 2.6.23-rc9:
> open("/dev/scanner", O_RDWR|O_NONBLOCK|O_EXCL) = 3
> ioctl(3, SG_SET_TIMEOUT, 0xbf84a834)    = 0
> ioctl(3, SG_GET_VERSION_NUM, 0x8062524) = 0
> ioctl(3, SG_GET_SCSI_ID, 0xbf84a7f0)    = -1 ENOTTY (Inappropriate ioctl
> for device)

After some reboots and tests I discovered, that this error occurs only when 
the scanner was turned off during system boot and was discovered later by 
invoking the following script:
for device in /sys/class/scsi_host/host*/scan ; do
        echo "0 - -" > $device
done
With 2.6.22 and before the scanner was fully functional when discovered by a 
bus rescan.

regards,
Jörg

-- 
PGP Key: send mail with subject 'SEND PGP-KEY' PGP Key-ID: FD 4E 21 1D
PGP Fingerprint: 388A872AFC5649D3 BCEC65778BE0C605