From: Arnd Bergmann <arnd@arndb.de>
To: Jens Axboe <jens.axboe@oracle.com>
Cc: linux-kernel@vger.kernel.org, davem@davemloft.net, hch@lst.de,
Al Viro <viro@ftp.linux.org.uk>
Subject: [patch 4/9] compat_ioctl: move hdio calls to block/compat_ioctl.c
Date: Sat, 06 Oct 2007 20:19:06 +0200 [thread overview]
Message-ID: <20071006182343.052354547@arndb.de> (raw)
In-Reply-To: 20071006181902.141862534@arndb.de
[-- Attachment #1: compat-hdiogetgeo.diff --]
[-- Type: text/plain, Size: 5026 bytes --]
These are common to multiple block drivers, so they should
be handled by the block layer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Index: linux-2.6/block/compat_ioctl.c
===================================================================
--- linux-2.6.orig/block/compat_ioctl.c
+++ linux-2.6/block/compat_ioctl.c
@@ -36,6 +36,62 @@ static int compat_put_u64(unsigned long
return put_user(val, (compat_u64 __user *)compat_ptr(arg));
}
+struct compat_hd_geometry {
+ unsigned char heads;
+ unsigned char sectors;
+ unsigned short cylinders;
+ u32 start;
+};
+
+static int compat_hdio_getgeo(struct gendisk *disk, struct block_device *bdev,
+ struct compat_hd_geometry __user *ugeo)
+{
+ struct hd_geometry geo;
+ int ret;
+
+ if (!ugeo)
+ return -EINVAL;
+ if (!disk->fops->getgeo)
+ return -ENOTTY;
+
+ /*
+ * We need to set the startsect first, the driver may
+ * want to override it.
+ */
+ geo.start = get_start_sect(bdev);
+ ret = disk->fops->getgeo(bdev, &geo);
+ if (ret)
+ return ret;
+
+ ret = copy_to_user(ugeo, &geo, 4);
+ ret |= __put_user(geo.start, &ugeo->start);
+ if (ret)
+ ret = -EFAULT;
+
+ return ret;
+}
+
+static int compat_hdio_ioctl(struct inode *inode, struct file *file,
+ struct gendisk *disk, unsigned int cmd, unsigned long arg)
+{
+ mm_segment_t old_fs = get_fs();
+ unsigned long kval;
+ unsigned int __user *uvp;
+ int error;
+
+ set_fs(KERNEL_DS);
+ error = blkdev_driver_ioctl(inode, file, disk,
+ cmd, (unsigned long)(&kval));
+ set_fs(old_fs);
+
+ if (error == 0) {
+ uvp = compat_ptr(arg);
+ if (put_user(kval, uvp))
+ error = -EFAULT;
+ }
+ return error;
+}
+
#define BLKBSZGET_32 _IOR(0x12, 112, int)
#define BLKBSZSET_32 _IOW(0x12, 113, int)
#define BLKGETSIZE64_32 _IOR(0x12, 114, int)
@@ -93,6 +149,18 @@ static int compat_blkdev_driver_ioctl(st
int ret;
switch (arg) {
+ case HDIO_GET_UNMASKINTR:
+ case HDIO_GET_MULTCOUNT:
+ case HDIO_GET_KEEPSETTINGS:
+ case HDIO_GET_32BIT:
+ case HDIO_GET_NOWERR:
+ case HDIO_GET_DMA:
+ case HDIO_GET_NICE:
+ case HDIO_GET_WCACHE:
+ case HDIO_GET_ACOUSTIC:
+ case HDIO_GET_ADDRESS:
+ case HDIO_GET_BUSSTATE:
+ return compat_hdio_ioctl(inode, file, disk, cmd, arg);
/*
* No handler required for the ones below, we just need to
* convert arg to a 64 bit pointer.
@@ -268,6 +336,8 @@ long compat_blkdev_ioctl(struct file *fi
struct gendisk *disk = bdev->bd_disk;
switch (cmd) {
+ case HDIO_GETGEO:
+ return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
case BLKFLSBUF:
case BLKROSET:
/*
Index: linux-2.6/fs/compat_ioctl.c
===================================================================
--- linux-2.6.orig/fs/compat_ioctl.c
+++ linux-2.6/fs/compat_ioctl.c
@@ -21,7 +21,6 @@
#include <linux/if.h>
#include <linux/if_bridge.h>
#include <linux/slab.h>
-#include <linux/hdreg.h>
#include <linux/raid/md.h>
#include <linux/kd.h>
#include <linux/dirent.h>
@@ -667,53 +666,6 @@ out:
#endif
#ifdef CONFIG_BLOCK
-struct hd_geometry32 {
- unsigned char heads;
- unsigned char sectors;
- unsigned short cylinders;
- u32 start;
-};
-
-static int hdio_getgeo(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
- mm_segment_t old_fs = get_fs();
- struct hd_geometry geo;
- struct hd_geometry32 __user *ugeo;
- int err;
-
- set_fs (KERNEL_DS);
- err = sys_ioctl(fd, HDIO_GETGEO, (unsigned long)&geo);
- set_fs (old_fs);
- ugeo = compat_ptr(arg);
- if (!err) {
- err = copy_to_user (ugeo, &geo, 4);
- err |= __put_user (geo.start, &ugeo->start);
- if (err)
- err = -EFAULT;
- }
- return err;
-}
-
-static int hdio_ioctl_trans(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
- mm_segment_t old_fs = get_fs();
- unsigned long kval;
- unsigned int __user *uvp;
- int error;
-
- set_fs(KERNEL_DS);
- error = sys_ioctl(fd, cmd, (long)&kval);
- set_fs(old_fs);
-
- if(error == 0) {
- uvp = compat_ptr(arg);
- if(put_user(kval, uvp))
- error = -EFAULT;
- }
- return error;
-}
-
-
typedef struct sg_io_hdr32 {
compat_int_t interface_id; /* [i] 'S' for SCSI generic (required) */
compat_int_t dxfer_direction; /* [i] data transfer direction */
@@ -3208,19 +3160,7 @@ HANDLE_IOCTL(SIOCGSTAMP, do_siocgstamp)
HANDLE_IOCTL(SIOCGSTAMPNS, do_siocgstampns)
#endif
#ifdef CONFIG_BLOCK
-HANDLE_IOCTL(HDIO_GETGEO, hdio_getgeo)
HANDLE_IOCTL(BLKPG, blkpg_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_UNMASKINTR, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_MULTCOUNT, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_KEEPSETTINGS, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_32BIT, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_NOWERR, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_DMA, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_NICE, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_WCACHE, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_ACOUSTIC, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_ADDRESS, hdio_ioctl_trans)
-HANDLE_IOCTL(HDIO_GET_BUSSTATE, hdio_ioctl_trans)
HANDLE_IOCTL(FDSETPRM32, fd_ioctl_trans)
HANDLE_IOCTL(FDDEFPRM32, fd_ioctl_trans)
HANDLE_IOCTL(FDGETPRM32, fd_ioctl_trans)
--
next prev parent reply other threads:[~2007-10-06 18:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-06 18:19 [patch 0/9] compat_ioctl: introduce block/compat_ioctl.c Arnd Bergmann
2007-10-06 18:19 ` [patch 1/9] compat_ioctl: move common block ioctls to compat_blkdev_ioctl Arnd Bergmann
2007-10-06 18:55 ` Christoph Hellwig
2007-10-06 23:44 ` Arnd Bergmann
2007-10-06 18:19 ` [patch 2/9] compat_ioctl: add compat_blkdev_driver_ioctl() Arnd Bergmann
2007-10-06 18:19 ` [patch 3/9] compat_ioctl: handle blk_trace ioctls Arnd Bergmann
2007-10-06 18:19 ` Arnd Bergmann [this message]
2007-10-06 18:19 ` [patch 5/9] compat_ioctl: move BLKPG handling to block/compat_ioctl.c Arnd Bergmann
2007-10-06 18:19 ` [patch 6/9] compat_ioctl: move cdrom handlers " Arnd Bergmann
2007-10-06 18:19 ` [patch 7/9] compat_ioctl: move floppy " Arnd Bergmann
2007-10-06 18:19 ` [patch 8/9] compat_ioctl: call disk->fops->compat_ioctl without BKL Arnd Bergmann
2007-10-07 9:53 ` Al Viro
2007-10-07 11:02 ` Arnd Bergmann
2007-10-06 18:19 ` [patch 9/9] compat_ioctl: fix compat_fd_ioctl pointer access Arnd Bergmann
2007-10-07 9:59 ` Al Viro
2007-10-08 5:12 ` [patch 0/9] compat_ioctl: introduce block/compat_ioctl.c Al Viro
2007-10-08 6:04 ` David Miller
2007-10-08 6:38 ` [PATCHv2 1/9] compat_ioctl: move common block ioctls to compat_blkdev_ioctl Arnd Bergmann
2007-10-09 11:24 ` [patch 0/9] compat_ioctl: introduce block/compat_ioctl.c Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071006182343.052354547@arndb.de \
--to=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=hch@lst.de \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@ftp.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).