public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Jan-Simon Möller" <dl9pf@gmx.de>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	alsa-devel@alsa-project.org
Subject: Re: hda-intel: no soundcard with current linus' git tree
Date: Thu, 18 Oct 2007 10:49:48 +0200	[thread overview]
Message-ID: <200710181049.48896.dl9pf@gmx.de> (raw)
In-Reply-To: <4716C68C.4030504@garzik.org>

I've also no sound. Had it working using the alsa.git tree _before_ the last 
merge (>48h). Needed to use model=asus for this fujitsu v5505 here.

Now it doesn't work, even with other model-options (fujitsu, laptop). 


legolas:/proc/asound # cat cards
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfc400000 irq 22
legolas:/proc/asound # cat pcm
00-01: Conexant Digital : Conexant Digital : playback 1
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
legolas:/proc/asound # cat hwdep
00-00: HDA Codec 0
legolas:/proc/asound # cat devices
  2:        : timer
  3: [ 0- 1]: digital audio playback
  4: [ 0- 0]: digital audio playback
  5: [ 0- 0]: digital audio capture
  6: [ 0- 0]: hardware dependent
  7: [ 0]   : control
  8:        : sequencer

legolas:/proc/asound # cat card0/codec#0
Codec: Conexant CX20549 (Venice)
Address: 0
Vendor Id: 0x14f15045
Subsystem Id: 0x1734110e
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
    rates [0x140]: 48000 96000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
  Amp-Out vals:  [0x2b 0x2b]
  Pincap 0x0810014: OUT EAPD Detect
  Pin Default 0x92170110: [Fixed] Speaker at Int Front
    Conn = Analog, Color = Unknown
  Pin-ctls: 0x40: OUT
  Power: 0x0
  Connection: 2
     0x19 0x17*
Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
  Amp-Out vals:  [0x2b 0x2b]
  Pincap 0x08113c: IN OUT HP Detect
  Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Green
  Pin-ctls: 0xc0: OUT HP
  Power: 0x0
  Connection: 2
     0x19 0x17*
Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
  Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1
  Amp-Out vals:  [0x2b 0x2b]
  Pincap 0x08113c: IN OUT HP Detect
  Pin Default 0x01a19020: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
  Pin-ctls: 0x20: IN
  Power: 0x0
  Connection: 2
     0x19 0x17*
Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital
  Pincap 0x0810: OUT
  Pin Default 0x214571f0: [Jack] SPDIF Out at Sep Rear
    Conn = Optical, Color = Yellow
  Pin-ctls: 0x00:
  Connection: 1
     0x18
Node 0x14 [Pin Complex] wcaps 0x400081: Stereo
  Pincap 0x081124: IN Detect
  Pin Default 0x97a7012e: [Fixed] Mic at Int Riser
    Conn = Analog, Color = Unknown
  Pin-ctls: 0x24: IN
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
  Pincap 0x0820: IN
  Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
    Conn = Unknown, Color = Unknown
  Pin-ctls: 0x00:
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
  Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1
  Amp-Out vals:  [0x06]
Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
  Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1
  Amp-In vals:  [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94] [0x94 0x94]
  Power: 0x0
  Connection: 5
     0x19 0x14 0x12 0x11 0x15
Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital
  PCM:
    rates [0x40]: 48000
    bits [0x6]: 16 20
    formats [0x5]: PCM AC3
Node 0x19 [Audio Output] wcaps 0xc11: Stereo
  PCM:
    rates [0x540]: 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
  Power: 0x0
Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1
  Amp-In vals:  [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
  Power: 0x0
  Connection: 5
     0x17 0x14* 0x12 0x11 0x15
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono

Best regards
Jan-Simon

  parent reply	other threads:[~2007-10-18  8:49 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-16 22:18 hda-intel: no soundcard with current linus' git tree Thomas Meyer
2007-10-17  2:47 ` Maxim Levitsky
2007-10-17  8:42 ` Takashi Iwai
2007-10-17 18:17   ` Thomas Meyer
2007-10-18  1:51     ` Maxim Levitsky
2007-10-18  1:53       ` Maxim Levitsky
2007-10-18  5:57         ` Takashi Iwai
2007-10-18 14:21           ` Maxim Levitsky
2007-10-18 13:49             ` Takashi Iwai
2007-10-18 15:24               ` Maxim Levitsky
2007-10-18 14:47                 ` Takashi Iwai
2007-10-21 15:42               ` Thomas Meyer
2007-10-18  2:35 ` Jeff Garzik
2007-10-18  3:36   ` Maxim Levitsky
2007-10-18  3:38     ` Jeff Garzik
2007-10-18  4:10       ` Maxim Levitsky
2007-10-18  4:24         ` Jeff Garzik
2007-10-18  6:02       ` Takashi Iwai
2007-10-18  8:49   ` Jan-Simon Möller [this message]
2007-10-18  8:11     ` [alsa-devel] " Takashi Iwai
2007-10-18 11:50       ` Jan-Simon Möller
2007-10-18 15:05         ` Jan-Simon Möller
2007-10-18 14:39           ` Takashi Iwai
2007-10-18 16:19             ` Jan-Simon Möller
2007-10-19  5:05               ` Takashi Iwai
2007-10-19 10:46                 ` Jan-Simon Möller
2007-10-19 10:02                   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200710181049.48896.dl9pf@gmx.de \
    --to=dl9pf@gmx.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox