From: Frans Pop <elendil@planet.nl>
To: linux-kernel@vger.kernel.org
Subject: Why are ipmi modules being loaded?
Date: Sun, 21 Oct 2007 15:34:11 +0200 [thread overview]
Message-ID: <200710211534.11817.elendil@planet.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 1166 bytes --]
Last week I sent this same question to the openipmi-developer list on
sourceforge, but did not get any replies.
Does anyone here know the answer?
========
AFAICT my system does not support ipmi, but despite that fact something is
loading the ipmi_msghandler module and trying to load the ipmi_si module.
The second fails, but the first stays loaded. From dmesg:
ipmi message handler version 39.1
[...]
ipmi_si: Trying PCI-specified kcs state machine at mem address 0x90220000,
slave address 0x0, irq 19
ipmi_si: There appears to be no BMC at this location
ipmi_si: Unable to find any System Interface(s)
This results in powertop showing:
Top causes for wakeups:
[...]
2.1% ( 10.0) <kernel module> : ipmi_init_msghandler (ipmi_timeout)
AFAICT from modules.pcimap, ipmi_si should only be loaded for PCI ID
[103c:121a] (which I don't have), or for devices with class c0700 (which I
also don't have).
I also cannot find anything in /etc that could be responsible.
So I wonder what _is_ responsible for trying to load the ipmi modules on my
system and if that shouldn't be avoided.
My system is Debian testing running 2.6.23.
Cheers,
Frans Pop
[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 2398 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c1] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
01:00.0 Ethernet controller [0200]: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) [8086:108c] (rev 03)
01:00.3 Serial controller [0700]: Intel Corporation Active Management Technology - SOL [8086:108f] (rev 03)
01:00.4 Serial bus controller [0c07]: Intel Corporation 82573E KCS (Active Management) [8086:108e] (rev 03)
06:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
next reply other threads:[~2007-10-21 13:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-21 13:34 Frans Pop [this message]
2007-10-21 20:09 ` Why are ipmi modules being loaded? Dave Jones
2007-10-21 21:04 ` Frans Pop
2007-10-21 23:39 ` Andreas Schwab
2007-10-21 21:58 ` Martin Mares
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200710211534.11817.elendil@planet.nl \
--to=elendil@planet.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox