From: Bradley Smith <bradjsmith@btinternet.com>
To: linux-kernel@vger.kernel.org, dz@debian.org
Subject: [PATCH 2/2] I8K: Adds i8k driver to the x86_64 Kconfig
Date: Sun, 28 Oct 2007 17:26:13 +0000 [thread overview]
Message-ID: <20071028172613.236cac1b@debian.hob> (raw)
From: Bradley Smith <bradjsmith@btinternet.com>
Adds i8k driver to the x86_64 Kconfig.
Signed-off-by: Bradley Smith <bradjsmith@btinternet.com>
---
Only applies on kernels >= 2.6.24.
Depends on "[PATCH 1/2] I8K: Allow i8k driver to be built on x86_64 systems"
--- linux-2.6/arch/x86/Kconfig.x86_64.orig 2007-10-28 14:04:13.000000000 +0000
+++ linux-2.6/arch/x86/Kconfig.x86_64 2007-10-28 13:59:06.000000000 +0000
@@ -224,6 +224,26 @@ config X86_GOOD_APIC
bool
default y
+config I8K
+ tristate "Dell laptop support"
+ ---help---
+ This adds a driver to safely access the System Management Mode
+ of the CPU on the Dell Inspiron 8000. The System Management Mode
+ is used to read cpu temperature and cooling fan status and to
+ control the fans on the I8K portables.
+
+ This driver has been tested only on the Inspiron 8000 but it may
+ also work with other Dell laptops. You can force loading on other
+ models by passing the parameter `force=1' to the module. Use at
+ your own risk.
+
+ For information on utilities to make use of this driver see the
+ I8K Linux utilities web site at:
+ <http://people.debian.org/~dz/i8k/>
+
+ Say Y if you intend to run this kernel on a Dell Inspiron 8000.
+ Say N otherwise.
+
config MICROCODE
tristate "/dev/cpu/microcode - Intel CPU microcode support"
select FW_LOADER
next reply other threads:[~2007-10-28 17:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-28 17:26 Bradley Smith [this message]
2007-10-28 17:46 ` [PATCH 2/2] I8K: Adds i8k driver to the x86_64 Kconfig Frans Pop
2007-10-28 17:55 ` Bradley Smith
2007-11-15 21:07 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071028172613.236cac1b@debian.hob \
--to=bradjsmith@btinternet.com \
--cc=dz@debian.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox