From: Joachim Fenkes <fenkes@de.ibm.com>
To: "LinuxPPC-Dev" <linuxppc-dev@ozlabs.org>,
LKML <linux-kernel@vger.kernel.org>,
"OF-General" <general@lists.openfabrics.org>,
Roland Dreier <rolandd@cisco.com>,
"OF-EWG" <ewg@lists.openfabrics.org>
Cc: "Hoang-Nam Nguyen" <hnguyen@de.ibm.com>,
Christoph Raisch <raisch@de.ibm.com>,
Stefan Roscher <stefan.roscher@de.ibm.com>
Subject: [PATCH 1/2] IB/ehca: Return physical link information in query_port()
Date: Fri, 2 Nov 2007 15:33:51 +0200 [thread overview]
Message-ID: <200711021433.51565.fenkes@de.ibm.com> (raw)
In-Reply-To: <200711021432.50203.fenkes@de.ibm.com>
Newer firmware versions return physical port information to the partition,
so hand that information to the consumer if it's present.
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
---
drivers/infiniband/hw/ehca/ehca_hca.c | 20 ++++++++++++++------
drivers/infiniband/hw/ehca/hipz_hw.h | 6 +++++-
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 15806d1..5bd7b59 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -151,7 +151,6 @@ int ehca_query_port(struct ib_device *ibdev,
}
memset(props, 0, sizeof(struct ib_port_attr));
- props->state = rblock->state;
switch (rblock->max_mtu) {
case 0x1:
@@ -188,11 +187,20 @@ int ehca_query_port(struct ib_device *ibdev,
props->subnet_timeout = rblock->subnet_timeout;
props->init_type_reply = rblock->init_type_reply;
- props->active_width = IB_WIDTH_12X;
- props->active_speed = 0x1;
-
- /* at the moment (logical) link state is always LINK_UP */
- props->phys_state = 0x5;
+ if (rblock->state && rblock->phys_width) {
+ props->phys_state = rblock->phys_pstate;
+ props->state = rblock->phys_state;
+ props->active_width = rblock->phys_width;
+ props->active_speed = rblock->phys_speed;
+ } else {
+ /* old firmware releases don't report physical
+ * port info, so use default values
+ */
+ props->phys_state = 5;
+ props->state = rblock->state;
+ props->active_width = IB_WIDTH_12X;
+ props->active_speed = 0x1;
+ }
query_port1:
ehca_free_fw_ctrlblock(rblock);
diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h b/drivers/infiniband/hw/ehca/hipz_hw.h
index d9739e5..485b840 100644
--- a/drivers/infiniband/hw/ehca/hipz_hw.h
+++ b/drivers/infiniband/hw/ehca/hipz_hw.h
@@ -402,7 +402,11 @@ struct hipz_query_port {
u64 max_msg_sz;
u32 max_mtu;
u32 vl_cap;
- u8 reserved2[1900];
+ u32 phys_pstate;
+ u32 phys_state;
+ u32 phys_speed;
+ u32 phys_width;
+ u8 reserved2[1884];
u64 guid_entries[255];
} __attribute__ ((packed));
--
1.5.2
next prev parent reply other threads:[~2007-11-02 13:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-02 13:32 [PATCH 0/2] IB/ehca: Return physical link information, fix static rate calculation Joachim Fenkes
2007-11-02 13:33 ` Joachim Fenkes [this message]
2007-11-02 13:41 ` [PATCH 2/2] IB/ehca: Fix " Joachim Fenkes
2007-11-07 19:45 ` Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200711021433.51565.fenkes@de.ibm.com \
--to=fenkes@de.ibm.com \
--cc=ewg@lists.openfabrics.org \
--cc=general@lists.openfabrics.org \
--cc=hnguyen@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=raisch@de.ibm.com \
--cc=rolandd@cisco.com \
--cc=stefan.roscher@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox