public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Alex Chiang <achiang@hp.com>
To: gregkh@suse.de, kristen.c.accardi@intel.com, lenb@kernel.org,
	matthew@wil.cx, rick.jones2@hp.com, linux-kernel@vger.kernel.org,
	linux-pci@atrey.karlin.mff.cuni.cz,
	pcihpd-discuss@lists.sourceforge.net, linux-acpi@vger.kernel.org
Subject: [PATCH 2/5] Construct one fakephp slot per pci slot
Date: Mon, 12 Nov 2007 17:13:36 -0700	[thread overview]
Message-ID: <20071113001336.GC13341@ldl.fc.hp.com> (raw)
In-Reply-To: <20071113000853.GA13341@ldl.fc.hp.com>

Register one slot per slot, rather than one slot per function.
Change the name of the slot to fake%d instead of the pci address.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
---
 drivers/pci/hotplug/fakephp.c |   75 +++++++++++++++--------------------------
 1 files changed, 27 insertions(+), 48 deletions(-)

diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 027f686..828335e 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -93,6 +93,7 @@ static int add_slot(struct pci_dev *dev)
 	struct dummy_slot *dslot;
 	struct hotplug_slot *slot;
 	int retval = -ENOMEM;
+	static int count = 1;
 
 	slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
 	if (!slot)
@@ -106,7 +107,8 @@ static int add_slot(struct pci_dev *dev)
 	slot->info->max_bus_speed = PCI_SPEED_UNKNOWN;
 	slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
-	slot->name = &dev->dev.bus_id[0];
+	slot->name = kmalloc(8, GFP_KERNEL);
+	sprintf(slot->name, "fake%d", count++);
 	dbg("slot->name = %s\n", slot->name);
 
 	dslot = kmalloc(sizeof(struct dummy_slot), GFP_KERNEL);
@@ -141,17 +143,17 @@ error:
 static int __init pci_scan_buses(void)
 {
 	struct pci_dev *dev = NULL;
-	int retval = 0;
+	int lastslot = 0;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		retval = add_slot(dev);
-		if (retval) {
-			pci_dev_put(dev);
-			break;
-		}
+		if (PCI_FUNC(dev->devfn) > 0 &&
+				lastslot == PCI_SLOT(dev->devfn))
+			continue;
+		lastslot = PCI_SLOT(dev->devfn);
+		add_slot(dev);
 	}
 
-	return retval;
+	return 0;
 }
 
 static void remove_slot(struct dummy_slot *dslot)
@@ -275,23 +277,9 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 	return -ENODEV;
 }
 
-/* find the hotplug_slot for the pci_dev */
-static struct hotplug_slot *get_slot_from_dev(struct pci_dev *dev)
-{
-	struct dummy_slot *dslot;
-
-	list_for_each_entry(dslot, &slot_list, node) {
-		if (dslot->dev == dev)
-			return dslot->slot;
-	}
-	return NULL;
-}
-
-
 static int disable_slot(struct hotplug_slot *slot)
 {
 	struct dummy_slot *dslot;
-	struct hotplug_slot *hslot;
 	struct pci_dev *dev;
 	int func;
 
@@ -301,36 +289,27 @@ static int disable_slot(struct hotplug_slot *slot)
 
 	dbg("%s - physical_slot = %s\n", __FUNCTION__, slot->name);
 
-	/* don't disable bridged devices just yet, we can't handle them easily... */
-	if (dslot->dev->subordinate) {
-		err("Can't remove PCI devices with other PCI devices behind it yet.\n");
-		return -ENODEV;
-	}
-	/* search for subfunctions and disable them first */
-	if (!(dslot->dev->devfn & 7)) {
-		for (func = 1; func < 8; func++) {
-			dev = pci_get_slot(dslot->dev->bus,
-					dslot->dev->devfn + func);
-			if (dev) {
-				hslot = get_slot_from_dev(dev);
-				if (hslot)
-					disable_slot(hslot);
-				else {
-					err("Hotplug slot not found for subfunction of PCI device\n");
-					return -ENODEV;
-				}
-				pci_dev_put(dev);
-			} else
-				dbg("No device in slot found\n");
+	for (func = 7; func >= 0; func--) {
+		dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func);
+		if (!dev)
+			continue;
+
+		/* don't disable bridged devices just yet, we can't handle
+		 * them easily... */
+		if (dev->subordinate) {
+			err("Can't remove PCI devices with other PCI devices behind it yet.\n");
+			return -ENODEV;
 		}
-	}
 
-	/* remove the device from the pci core */
-	pci_remove_bus_device(dslot->dev);
 
-	/* blow away this sysfs entry and other parts. */
-	remove_slot(dslot);
+		/* remove the device from the pci core */
+		pci_remove_bus_device(dslot->dev);
 
+		/* blow away this sysfs entry and other parts. */
+		remove_slot(dslot);
+
+		pci_dev_put(dev);
+	}
 	return 0;
 }
 
-- 
1.5.3.1.1.g1e61


  parent reply	other threads:[~2007-11-13  0:14 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-13  0:08 [PATCH 0/5][RFC] Physical PCI slot objects Alex Chiang
2007-11-13  0:12 ` [PATCH 1/5] Remove path attribute from sgi_hotplug Alex Chiang
2007-11-13  0:13 ` Alex Chiang [this message]
2007-11-13 19:48   ` [PATCH 2/5] Construct one fakephp slot per pci slot Linas Vepstas
2007-11-13 19:52     ` Matthew Wilcox
2007-11-14 12:39   ` [Pcihpd-discuss] " Rolf Eike Beer
2007-11-14 14:17     ` Alex Chiang
2007-11-14 14:49       ` Rolf Eike Beer
2007-11-14 15:01         ` Alex Chiang
2007-11-13  0:14 ` [PATCH 3/5, RFC] Introduce pci_slot Alex Chiang
2007-11-13 19:56   ` Linas Vepstas
2007-11-13 20:03     ` Matthew Wilcox
2007-11-13  0:17 ` [PATCH 4/5, RFC] ACPI PCI slot detection driver Alex Chiang
2007-11-13  0:18   ` [PATCH 5/5] Add pci_slot_add_hotplug() interface Alex Chiang
2007-11-13 17:01 ` [PATCH 0/5][RFC] Physical PCI slot objects Greg KH
2007-11-13 18:33   ` Matthew Wilcox
2007-11-13 18:51     ` Greg KH
2007-11-13 20:11       ` Matthew Wilcox
2007-11-13 20:19         ` Greg KH
2007-11-13 23:08         ` Gary Hade
2007-11-14  1:37           ` Alex Chiang
2007-11-15  0:40             ` Gary Hade
2007-11-15 17:36               ` Alex Chiang
2007-11-15 23:38                 ` Gary Hade
2007-11-14 14:42           ` Alex Chiang
2007-11-14 18:13             ` Gary Hade
2007-11-14 18:36               ` Alex Chiang
2007-11-13 20:36       ` Alex Chiang
2007-11-13 21:30         ` Greg KH
2007-11-13 22:01           ` Bjorn Helgaas
2007-11-13 22:16             ` Greg KH
2007-11-13 21:15       ` Matt Domsch
2007-11-13 21:31         ` Alex Chiang
2007-11-13 21:36           ` Greg KH
2007-11-13 23:14             ` Alex Chiang
2007-11-13 21:32         ` Greg KH
2007-11-13 20:21   ` Alex Chiang
2007-11-13 20:26     ` Greg KH
2007-11-13 22:51       ` Rick Jones
2007-11-13 22:56         ` Greg KH
2007-11-13 23:04           ` Matthew Wilcox
2007-11-13 23:07             ` Greg KH
2007-11-14  6:00               ` Scott Murray
2007-11-13 23:33             ` Kristen Carlson Accardi
2007-11-14  0:10               ` Matthew Wilcox
2007-11-14  9:55                 ` Kenji Kaneshige
2007-11-14 18:38                   ` Kristen Carlson Accardi
2007-11-13 22:59       ` Kristen Carlson Accardi
2007-11-14 17:37         ` Bjorn Helgaas
2007-11-14 17:53           ` Greg KH
2007-11-14 19:53             ` Alex Chiang
2007-11-14 21:24             ` Alex Chiang
2007-11-14 21:42             ` Alex Chiang
2007-11-14 22:00               ` Greg KH
2007-11-15 20:20                 ` Alex Chiang
2007-11-14 17:44       ` Matthew Garrett
2007-11-14 17:51         ` Greg KH
2007-11-14 18:03           ` Matthew Garrett
2007-11-13 20:24   ` Linas Vepstas
2007-11-13 20:59     ` Alex Chiang
2007-11-13 21:41       ` Linas Vepstas
2007-11-13 21:58         ` Matthew Wilcox
2007-11-14  1:07   ` Andi Kleen
2007-11-14 14:17     ` Matthew Wilcox
2007-11-14 14:35       ` Andi Kleen
2007-11-14 15:00         ` Matthew Wilcox
2007-11-14 15:08           ` Andi Kleen
2007-11-14 15:12             ` Matthew Wilcox
2007-11-14 15:20             ` Alex Chiang
2007-11-14 11:43 ` Kenji Kaneshige
  -- strict thread matches above, loose matches on Subject: below --
2007-11-14 19:36 [PATCH 0/5, v2] " Alex Chiang
2007-11-14 19:37 ` [PATCH 2/5] Construct one fakephp slot per pci slot Alex Chiang
2007-11-14 20:12   ` Matthew Wilcox
2007-11-14 20:55     ` Alex Chiang
2007-11-15 11:57       ` Rolf Eike Beer
2007-11-15 17:40         ` Alex Chiang
2007-11-14 21:04     ` Alex Chiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071113001336.GC13341@ldl.fc.hp.com \
    --to=achiang@hp.com \
    --cc=gregkh@suse.de \
    --cc=kristen.c.accardi@intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@atrey.karlin.mff.cuni.cz \
    --cc=matthew@wil.cx \
    --cc=pcihpd-discuss@lists.sourceforge.net \
    --cc=rick.jones2@hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox