[patch 12/16] sky2: fix power settings on Yukon XL

[Greg KH <gregkh@suse.de>]

[-- Attachment #1: sky2-phy-power.patch --]
[-- Type: text/plain, Size: 1543 bytes --]


-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Stephen Hemminger <shemminger@linux-foundation.org>

patch ff35164e72648e0bf0b10ec4410c195e8607e88b in mainline.

Make sure PCI register for PHY power gets set correctly.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


---
 drivers/net/sky2.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -603,21 +603,22 @@ static void sky2_phy_init(struct sky2_hw
 static void sky2_phy_power(struct sky2_hw *hw, unsigned port, int onoff)
 {
 	u32 reg1;
-	static const u32 phy_power[]
-		= { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
-
-	/* looks like this XL is back asswards .. */
-	if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
-		onoff = !onoff;
+	static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
+	static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
 
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+
 	if (onoff)
 		/* Turn off phy power saving */
 		reg1 &= ~phy_power[port];
 	else
 		reg1 |= phy_power[port];
 
+	if (onoff && hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+		reg1 |= coma_mode[port];
+
+
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);

--