Re: EIP is at device_shutdown+0x32/0x60

[Yasunori Goto <y-goto@jp.fujitsu.com>]

> On Thu, 15 Nov 2007 12:11:58 +0300 Alexey Dobriyan <adobriyan@sw.ru> wrote:
> 
> > Three boxes rarely oops during reboot or poweroff with 2.6.24-rc2-mm1
> > (1) and during 2.6.24 cycle (2):
> > 
> > 	kernel_restart
> > 	sys_reboot
> > 	[garbage]
> > Code: 8b 88 a8 00 00 00 85 c9 74 04 89
> > EIP is at device_shutdown+0x32/0x60
> 
> Yes, all my test boxes did that - it's what I referred to in the releaee
> notes.  Greg is pondering the problem - seem he's the only person who
> cannot reproduce it ;)

Fortunately, my ia64 box reproduces this oops "every time". 
So, I could chase it.

device_shutdown() function in drivers/base/power/shutdown.c
is followings.
-----------
/**
 * device_shutdown - call ->shutdown() on each device to shutdown.
 */
void device_shutdown(void)
{
        struct device * dev, *devn;

        list_for_each_entry_safe_reverse(dev, devn, &devices_kset->list,
                                kobj.entry) {
                if (dev->bus && dev->bus->shutdown) {
                        dev_dbg(dev, "shutdown\n");
                        dev->bus->shutdown(dev);
                } else if (dev->driver && dev->driver->shutdown) {
                        dev_dbg(dev, "shutdown\n");
                        dev->driver->shutdown(dev);
                }
        }
}
--------
When oops occured, dev->driver pointed kset_ktype's address,
and dev->driver->shutdown was the address of bus_type_list.
So, Oops was caused by "Illegal operation fault".
kset_ktypes is pointed by system_kset.

If my understanding is correct, this loop can't distinguish between
struct device and struct kset, but both are connected in this list,
right? It may be the cause of this.

Bye.

-- 
Yasunori Goto