From: Patrick McHardy <kaber@trash.net>
To: herbert@gondor.apana.org.au
Cc: johnpol@2ka.mipt.ru, Patrick McHardy <kaber@trash.net>,
linux-crypto@vger.kernel.org, mb@bu3sch.de,
linux-kernel@vger.kernel.org
Subject: [HIFN 03/03]: Add support for using the random number generator
Date: Sun, 18 Nov 2007 22:32:57 +0100 (MET) [thread overview]
Message-ID: <20071118213246.9217.6165.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20071118213241.9217.7696.sendpatchset@localhost.localdomain>
[HIFN]: Add support for using the random number generator
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
commit 352a65d036f53c1e124bef4205d6fcedb78eac2c
tree 190bb0b4a1795e55096552f743af996df2766070
parent 70467fae3a656562f86adefdfe6d54e3ca20feeb
author Patrick McHardy <kaber@trash.net> Sun, 18 Nov 2007 22:09:17 +0100
committer Patrick McHardy <kaber@trash.net> Sun, 18 Nov 2007 22:09:17 +0100
drivers/crypto/hifn_795x.c | 82 +++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 81 insertions(+), 1 deletions(-)
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index de594bc..1a19700 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -31,6 +31,8 @@
#include <linux/highmem.h>
#include <linux/interrupt.h>
#include <linux/crypto.h>
+#include <linux/hw_random.h>
+#include <linux/ktime.h>
#include <crypto/algapi.h>
#include <crypto/des.h>
@@ -458,6 +460,14 @@ struct hifn_device
struct crypto_queue queue;
struct list_head alg_list;
+
+ unsigned int pk_clk_freq;
+
+#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE)
+ unsigned int rng_wait_time;
+ ktime_t rngtime;
+ struct hwrng rng;
+#endif
};
#define HIFN_D_LENGTH 0x0000ffff
@@ -785,6 +795,56 @@ static struct pci2id {
}
};
+#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE)
+static int hifn_rng_data_present(struct hwrng *rng, int wait)
+{
+ struct hifn_device *dev = (struct hifn_device *)rng->priv;
+ s64 nsec;
+
+ nsec = ktime_to_ns(ktime_sub(ktime_get(), dev->rngtime));
+ nsec -= dev->rng_wait_time;
+ if (nsec <= 0)
+ return 1;
+ if (!wait)
+ return 0;
+ ndelay(nsec);
+ return 1;
+}
+
+static int hifn_rng_data_read(struct hwrng *rng, u32 *data)
+{
+ struct hifn_device *dev = (struct hifn_device *)rng->priv;
+
+ *data = hifn_read_1(dev, HIFN_1_RNG_DATA);
+ dev->rngtime = ktime_get();
+ return 4;
+}
+
+static int hifn_register_rng(struct hifn_device *dev)
+{
+ /*
+ * We must wait at least 256 Pk_clk cycles between two reads of the rng.
+ */
+ dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) *
+ 256;
+
+ dev->rng.name = dev->name;
+ dev->rng.data_present = hifn_rng_data_present,
+ dev->rng.data_read = hifn_rng_data_read,
+ dev->rng.priv = (unsigned long)dev;
+
+ return hwrng_register(&dev->rng);
+}
+
+static void hifn_unregister_rng(struct hifn_device *dev)
+{
+ hwrng_unregister(&dev->rng);
+}
+#else
+#define hifn_register_rng(dev) 0
+#define hifn_unregister_rng(dev)
+#endif
+
static int hifn_init_pubrng(struct hifn_device *dev)
{
int i;
@@ -820,6 +880,11 @@ static int hifn_init_pubrng(struct hifn_device *dev)
dprintk("Chip %s: RNG engine has been successfully initialised.\n",
dev->name);
+#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE)
+ /* First value must be discarded */
+ hifn_read_1(dev, HIFN_1_RNG_DATA);
+ dev->rngtime = ktime_get();
+#endif
return 0;
}
@@ -952,6 +1017,14 @@ static void hifn_init_pll(struct hifn_device *dev)
/* Switch the engines to the PLL */
hifn_write_1(dev, HIFN_1_PLL, pllcfg |
HIFN_PLL_PK_CLK_PLL | HIFN_PLL_PE_CLK_PLL);
+
+ /*
+ * The Fpk_clk runs at half the total speed. Its frequency is needed to
+ * calculate the minimum time between two reads of the rng. Since 33MHz
+ * is actually 33.333... we overestimate the frequency here, resulting
+ * in slightly larger intervals.
+ */
+ dev->pk_clk_freq = 1000000 * (freq + 1) * m / 2;
}
static void hifn_init_registers(struct hifn_device *dev)
@@ -2609,10 +2682,14 @@ static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (err)
goto err_out_stop_device;
- err = hifn_register_alg(dev);
+ err = hifn_register_rng(dev);
if (err)
goto err_out_stop_device;
+ err = hifn_register_alg(dev);
+ if (err)
+ goto err_out_unregister_rng;
+
INIT_DELAYED_WORK(&dev->work, hifn_work);
schedule_delayed_work(&dev->work, HZ);
@@ -2622,6 +2699,8 @@ static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
+err_out_unregister_rng:
+ hifn_unregister_rng(dev);
err_out_stop_device:
hifn_reset_dma(dev, 1);
hifn_stop_device(dev);
@@ -2662,6 +2741,7 @@ static void hifn_remove(struct pci_dev *pdev)
cancel_delayed_work(&dev->work);
flush_scheduled_work();
+ hifn_unregister_rng(dev);
hifn_unregister_alg(dev);
hifn_reset_dma(dev, 1);
hifn_stop_device(dev);
next prev parent reply other threads:[~2007-11-18 21:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-18 21:32 [HIFN 00/03]: RNG support v2 Patrick McHardy
2007-11-18 21:32 ` [HWRNG 01/03]: move status polling loop to data_present callbacks Patrick McHardy
2007-11-18 21:32 ` [HIFN 02/03]: Improve PLL initialization Patrick McHardy
2007-11-18 21:32 ` Patrick McHardy [this message]
2007-11-19 10:34 ` [HIFN 00/03]: RNG support v2 Evgeniy Polyakov
2007-11-19 18:19 ` Michael Buesch
2007-11-19 18:25 ` Patrick McHardy
2007-11-19 19:04 ` Michael Buesch
2007-11-21 4:54 ` Herbert Xu
2007-11-25 6:38 ` Andrew Morton
2007-11-25 6:46 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071118213246.9217.6165.sendpatchset@localhost.localdomain \
--to=kaber@trash.net \
--cc=herbert@gondor.apana.org.au \
--cc=johnpol@2ka.mipt.ru \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mb@bu3sch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox