Re: 2.6.24-rc2 STD with s2disk fails to activate suspended system after loading - now 2.6.24-rc3

[Chris Friedhoff <chris@friedhoff.org>]

dmesg output is added.

increasing CONFIG_BLK_DEV_RAM_SIZE from 7777 to 131072 hasn't changed
the non-functioning of 2.6.24-rc3

s2disk works with 2.6.23.8 ; I tested 4 cycles in a row, 2 from console
and 2 from within X


Chris


On Mon, 19 Nov 2007 19:58:36 +0100
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> On Monday, 19 of November 2007, Chris Friedhoff wrote:
> > Hallo Rafael,
> > 
> > just to let you know: with 2.6.24-rc3 I have the same problem.
> 
> Thanks.
>  
> > On Sun, 11 Nov 2007 19:45:06 +0100
> > "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> > 
> > > On Saturday, 10 of November 2007, Chris Friedhoff wrote:
> > > > please cc me, I'm not not subscribed to LKML
> > > > 
> > > > Hello,
> > > > 
> > > > with kernel 2.6.24-rc2 STD with s2disk suspends the system to disk, but
> > > > when I start the system and the suspended systemimage is loaded, it
> > > > fails to "activate" this suspended systemimage and continues after some
> > > > time with following the normal boot sequence.
> 
> Please add the dmesg output taken right after that as an attachment to the
> bugzilla entry at http://bugzilla.kernel.org/show_bug.cgi?id=9345
> 
> Thanks,
> Rafael


--------------------
Chris Friedhoff
chris@friedhoff.org