From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: linux-kernel@vger.kernel.org, linux-s390@vger.kernel.org
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
Martin Schwidefsky <schwidefsky@de.ibm.com>
Subject: [patch 21/47] Change vmalloc defintions
Date: Thu, 20 Dec 2007 16:19:46 +0100 [thread overview]
Message-ID: <20071220152107.723041491@de.ibm.com> (raw)
In-Reply-To: 20071220151925.405881218@de.ibm.com
[-- Attachment #1: 120-vmalloc.diff --]
[-- Type: text/plain, Size: 6218 bytes --]
From: Christian Borntraeger <borntraeger@de.ibm.com>
Currently the vmalloc area starts at a dynamic address depending on
the memory size. There was also an 8MB security hole after the
physical memory to catch out-of-bounds accesses.
We can simplify the code by putting the vmalloc area explicitely at
the top of the kernel mapping and setting the vmalloc size to a fixed
value of 128MB/128GB for 31bit/64bit systems. Part of the vmalloc
area will be used for the vmem_map. This leaves an area of 96MB/1GB
for normal vmalloc allocations.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/kernel/setup.c | 6 ++---
arch/s390/mm/vmem.c | 20 ++++++-------------
include/asm-s390/pgtable.h | 46 +++++++++++++++------------------------------
3 files changed, 26 insertions(+), 46 deletions(-)
Index: quilt-2.6/arch/s390/kernel/setup.c
===================================================================
--- quilt-2.6.orig/arch/s390/kernel/setup.c
+++ quilt-2.6/arch/s390/kernel/setup.c
@@ -617,7 +617,7 @@ EXPORT_SYMBOL_GPL(real_memory_size);
static void __init setup_memory_end(void)
{
unsigned long memory_size;
- unsigned long max_mem, max_phys;
+ unsigned long max_mem;
int i;
#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
@@ -625,10 +625,10 @@ static void __init setup_memory_end(void
memory_end = ZFCPDUMP_HSA_SIZE;
#endif
memory_size = 0;
- max_phys = VMALLOC_END_INIT - VMALLOC_MIN_SIZE;
memory_end &= PAGE_MASK;
- max_mem = memory_end ? min(max_phys, memory_end) : max_phys;
+ max_mem = memory_end ? min(VMALLOC_START, memory_end) : VMALLOC_START;
+ memory_end = min(max_mem, memory_end);
for (i = 0; i < MEMORY_CHUNKS; i++) {
struct mem_chunk *chunk = &memory_chunk[i];
Index: quilt-2.6/arch/s390/mm/vmem.c
===================================================================
--- quilt-2.6.orig/arch/s390/mm/vmem.c
+++ quilt-2.6/arch/s390/mm/vmem.c
@@ -15,10 +15,6 @@
#include <asm/setup.h>
#include <asm/tlbflush.h>
-unsigned long vmalloc_end;
-EXPORT_SYMBOL(vmalloc_end);
-
-static struct page *vmem_map;
static DEFINE_MUTEX(vmem_mutex);
struct memory_segment {
@@ -188,8 +184,8 @@ static int vmem_add_mem_map(unsigned lon
pte_t pte;
int ret = -ENOMEM;
- map_start = vmem_map + PFN_DOWN(start);
- map_end = vmem_map + PFN_DOWN(start + size);
+ map_start = VMEM_MAP + PFN_DOWN(start);
+ map_end = VMEM_MAP + PFN_DOWN(start + size);
start_addr = (unsigned long) map_start & PAGE_MASK;
end_addr = PFN_ALIGN((unsigned long) map_end);
@@ -254,7 +250,7 @@ static int insert_memory_segment(struct
{
struct memory_segment *tmp;
- if (PFN_DOWN(seg->start + seg->size) > max_pfn ||
+ if (seg->start + seg->size >= VMALLOC_START ||
seg->start + seg->size < seg->start)
return -ERANGE;
@@ -357,17 +353,15 @@ out:
/*
* map whole physical memory to virtual memory (identity mapping)
+ * we reserve enough space in the vmalloc area for vmemmap to hotplug
+ * additional memory segments.
*/
void __init vmem_map_init(void)
{
- unsigned long map_size;
int i;
- map_size = ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page);
- vmalloc_end = PFN_ALIGN(VMALLOC_END_INIT) - PFN_ALIGN(map_size);
- vmem_map = (struct page *) vmalloc_end;
- NODE_DATA(0)->node_mem_map = vmem_map;
-
+ BUILD_BUG_ON((unsigned long)VMEM_MAP + VMEM_MAP_SIZE > VMEM_MAP_MAX);
+ NODE_DATA(0)->node_mem_map = VMEM_MAP;
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++)
vmem_add_mem(memory_chunk[i].addr, memory_chunk[i].size);
}
Index: quilt-2.6/include/asm-s390/pgtable.h
===================================================================
--- quilt-2.6.orig/include/asm-s390/pgtable.h
+++ quilt-2.6/include/asm-s390/pgtable.h
@@ -104,41 +104,27 @@ extern char empty_zero_page[PAGE_SIZE];
#ifndef __ASSEMBLY__
/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- * vmalloc area starts at 4GB to prevent syscall table entry exchanging
- * from modules.
- */
-extern unsigned long vmalloc_end;
-
-#ifdef CONFIG_64BIT
-#define VMALLOC_ADDR (max(0x100000000UL, (unsigned long) high_memory))
-#else
-#define VMALLOC_ADDR ((unsigned long) high_memory)
-#endif
-#define VMALLOC_OFFSET (8*1024*1024)
-#define VMALLOC_START ((VMALLOC_ADDR + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END vmalloc_end
-
-/*
- * We need some free virtual space to be able to do vmalloc.
- * VMALLOC_MIN_SIZE defines the minimum size of the vmalloc
- * area. On a machine with 2GB memory we make sure that we
- * have at least 128MB free space for vmalloc. On a machine
- * with 4TB we make sure we have at least 128GB.
+ * The vmalloc area will always be on the topmost area of the kernel
+ * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc,
+ * which should be enough for any sane case.
+ * By putting vmalloc at the top, we maximise the gap between physical
+ * memory and vmalloc to catch misplaced memory accesses. As a side
+ * effect, this also makes sure that 64 bit module code cannot be used
+ * as system call address.
*/
#ifndef __s390x__
-#define VMALLOC_MIN_SIZE 0x8000000UL
-#define VMALLOC_END_INIT 0x80000000UL
+#define VMALLOC_START 0x78000000UL
+#define VMALLOC_END 0x7e000000UL
+#define VMEM_MAP_MAX 0x80000000UL
#else /* __s390x__ */
-#define VMALLOC_MIN_SIZE 0x2000000000UL
-#define VMALLOC_END_INIT 0x40000000000UL
+#define VMALLOC_START 0x3e000000000UL
+#define VMALLOC_END 0x3e040000000UL
+#define VMEM_MAP_MAX 0x40000000000UL
#endif /* __s390x__ */
+#define VMEM_MAP ((struct page *) VMALLOC_END)
+#define VMEM_MAP_SIZE ((VMALLOC_START / PAGE_SIZE) * sizeof(struct page))
+
/*
* A 31 bit pagetable entry of S390 has following format:
* | PFRA | | OS |
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.
next prev parent reply other threads:[~2007-12-20 15:40 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-20 15:19 [patch 00/47] s390 2.6.25 patch queue Martin Schwidefsky
2007-12-20 15:19 ` [patch 01/47] Cleanup in Documentation/kernel-parameters.txt Martin Schwidefsky
2007-12-20 15:19 ` [patch 02/47] cio: Dump ccw device information in case of timeout Martin Schwidefsky
2007-12-20 15:19 ` [patch 03/47] cio: Use helpers instead of container_of() Martin Schwidefsky
2007-12-20 15:19 ` [patch 04/47] cio: css_driver: Use consistent parameters Martin Schwidefsky
2007-12-20 15:19 ` [patch 05/47] cio: Reset sch->driver Martin Schwidefsky
2007-12-20 15:19 ` [patch 06/47] cio: Add css_driver_{register,unregister} Martin Schwidefsky
2007-12-20 15:19 ` [patch 07/47] cio: Cleanup debug feature usage Martin Schwidefsky
2007-12-20 15:19 ` [patch 08/47] cio: Introduce subchannel->private Martin Schwidefsky
2007-12-20 15:19 ` [patch 09/47] cio: Extend adapter interrupt interface Martin Schwidefsky
2007-12-20 15:19 ` [patch 10/47] cio: I/O subchannel specific fields Martin Schwidefsky
2007-12-20 15:19 ` [patch 11/47] cio: Use dev_{g,s}et_drvdata() Martin Schwidefsky
2007-12-20 15:19 ` [patch 12/47] cio: Set driver->owner on css, ccw and ccwgroup busses Martin Schwidefsky
2007-12-20 15:19 ` [patch 13/47] cio: reduce cpu utilization during device scan Martin Schwidefsky
2007-12-20 15:19 ` [patch 14/47] qdio: Remove double checked value Martin Schwidefsky
2007-12-20 15:19 ` [patch 15/47] qdio: set QDIO_ACTIVATE_TIMEOUT to 5s Martin Schwidefsky
2007-12-20 15:19 ` [patch 16/47] sclp: sysfs interface for SCLP cpi Martin Schwidefsky
2007-12-20 15:19 ` [patch 17/47] Standby cpu activation/deactivation Martin Schwidefsky
2007-12-20 15:19 ` [patch 18/47] sclp: convert channel path configure code to use sync interface Martin Schwidefsky
2007-12-20 15:19 ` [patch 19/47] Optimize reference bit handling Martin Schwidefsky
2007-12-20 15:19 ` [patch 20/47] Fix tlb flushing with idte Martin Schwidefsky
2007-12-20 15:19 ` Martin Schwidefsky [this message]
2007-12-20 15:19 ` [patch 22/47] Print kernel version in dump_stack() and show_regs() Martin Schwidefsky
2007-12-20 15:19 ` [patch 23/47] Get rid of HOLES_IN_ZONE requirement Martin Schwidefsky
2007-12-20 15:19 ` [patch 24/47] DEBUG_PAGEALLOC support for s390 Martin Schwidefsky
2007-12-20 15:19 ` [patch 25/47] Remove owner_pc member from raw_spinlock_t Martin Schwidefsky
2007-12-20 15:19 ` [patch 26/47] Use new style spinlock initializer in __RWSEM_INITIALIZER Martin Schwidefsky
2007-12-20 15:19 ` [patch 27/47] Get rid of additional_cpus kernel parameter Martin Schwidefsky
2007-12-20 15:19 ` [patch 28/47] Remove appldata include from sysctl_check.c Martin Schwidefsky
2007-12-20 15:19 ` [patch 29/47] crypto: move s390 Kconfig options Martin Schwidefsky
2007-12-20 15:19 ` [patch 30/47] dasd: fix return value of dasd_generic_probe() Martin Schwidefsky
2007-12-20 15:19 ` [patch 31/47] arch/s390: Add missing "space" Martin Schwidefsky
2007-12-20 15:19 ` [patch 32/47] drivers/s390: " Martin Schwidefsky
2007-12-20 15:19 ` [patch 33/47] kernel: Shutdown Actions Interface Martin Schwidefsky
2007-12-20 15:19 ` [patch 34/47] Load disabled wait psw instead of stopping cpu on halt Martin Schwidefsky
2007-12-20 15:20 ` [patch 35/47] use LIST_HEAD instead of LIST_HEAD_INIT Martin Schwidefsky
2007-12-20 15:20 ` [patch 36/47] Allocate and free cpu lowcores and stacks when needed/possible Martin Schwidefsky
2007-12-20 15:20 ` [patch 37/47] Initialize sclp_ipl_info Martin Schwidefsky
2007-12-20 15:20 ` [patch 38/47] vmemmap: allocate struct pages before 1:1 mapping Martin Schwidefsky
2007-12-20 15:20 ` [patch 39/47] Use diag308 subcodes 3 and 6 for reboot and dump when possible Martin Schwidefsky
2007-12-20 15:20 ` [patch 40/47] arch/s390/: Spelling fixes Martin Schwidefsky
2007-12-20 15:20 ` [patch 41/47] include/asm-s390/: " Martin Schwidefsky
2007-12-20 15:20 ` [patch 42/47] drivers/s390/: " Martin Schwidefsky
2007-12-20 15:20 ` [patch 43/47] Move NOTES and BUG_TABLE Martin Schwidefsky
2007-12-20 15:20 ` [patch 44/47] single-step cleanup Martin Schwidefsky
2007-12-20 15:20 ` [patch 45/47] dasd: add hyper PAV support to DASD device driver, part 1 Martin Schwidefsky
2007-12-20 15:20 ` [patch 46/47] dasd: add hyper PAV support to DASD device driver, part 2 Martin Schwidefsky
2007-12-20 15:20 ` [patch 47/47] dasd: add hyper PAV support to DASD device driver, part 3 Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071220152107.723041491@de.ibm.com \
--to=schwidefsky@de.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox