[PATCH 0/15] adjust pvops to accomodate its x86_64 variant

[PATCH 0/15] adjust pvops to accomodate its x86_64 variant

[Glauber de Oliveira Costa]

Hi folks,

With this series, the bulk of the work of pvops64 is done.
Here, I integrate most of the paravirt.c and paravirt.h files, making
them applicable to both architectures.

CONFIG_PARAVIRT is _not_ present yet. Basically, this code is missing page
table integration (patches currently being worked on by Jeremy).

Enjoy

[PATCH 01/15] change paravirt_32.c name

[Glauber de Oliveira Costa]

This patch changes paravirt_32.c to paravirt.c. The goal
is to have paravirt support in x86_64, so we do it in a common file

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/Makefile_32   |    2 +-
 arch/x86/kernel/paravirt.c    |  475 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/paravirt_32.c |  472 ----------------------------------------
 3 files changed, 476 insertions(+), 473 deletions(-)
 create mode 100644 arch/x86/kernel/paravirt.c
 delete mode 100644 arch/x86/kernel/paravirt_32.c

Index: linux-2.6-x86/arch/x86/kernel/Makefile_32
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/Makefile_32	2007-12-20 19:07:08.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/Makefile_32	2007-12-20 19:07:15.000000000 -0800
@@ -48,7 +48,7 @@
 obj-$(CONFIG_MGEODE_LX)		+= geode_32.o mfgpt_32.o
 
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt_32.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o
 obj-y				+= pcspeaker.o
 
 obj-$(CONFIG_SCx200)		+= scx200_32.o
Index: linux-2.6-x86/arch/x86/kernel/paravirt.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-x86/arch/x86/kernel/paravirt.c	2007-12-20 19:07:15.000000000 -0800
@@ -0,0 +1,475 @@
+/*  Paravirtualization interfaces
+    Copyright (C) 2006 Rusty Russell IBM Corporation
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+    2007 - x86_64 support added by Glauber de Oliveira Costa, Red Hat Inc
+*/
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/bcd.h>
+#include <linux/highmem.h>
+
+#include <asm/bug.h>
+#include <asm/paravirt.h>
+#include <asm/desc.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+#include <asm/fixmap.h>
+#include <asm/apic.h>
+#include <asm/tlbflush.h>
+#include <asm/timer.h>
+
+/* nop stub */
+void _paravirt_nop(void)
+{
+}
+
+static void __init default_banner(void)
+{
+	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
+	       pv_info.name);
+}
+
+char *memory_setup(void)
+{
+	return pv_init_ops.memory_setup();
+}
+
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code)					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
+DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
+DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
+DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
+DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
+DEF_NATIVE(pv_cpu_ops, iret, "iret");
+DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
+DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
+DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
+DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
+DEF_NATIVE(pv_cpu_ops, clts, "clts");
+DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
+
+/* Undefined instruction for dealing with missing ops pointers. */
+static const unsigned char ud2a[] = { 0x0f, 0x0b };
+
+static unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+			     unsigned long addr, unsigned len)
+{
+	const unsigned char *start, *end;
+	unsigned ret;
+
+	switch(type) {
+#define SITE(ops, x)						\
+	case PARAVIRT_PATCH(ops.x):				\
+		start = start_##ops##_##x;			\
+		end = end_##ops##_##x;				\
+		goto patch_site
+
+	SITE(pv_irq_ops, irq_disable);
+	SITE(pv_irq_ops, irq_enable);
+	SITE(pv_irq_ops, restore_fl);
+	SITE(pv_irq_ops, save_fl);
+	SITE(pv_cpu_ops, iret);
+	SITE(pv_cpu_ops, irq_enable_syscall_ret);
+	SITE(pv_mmu_ops, read_cr2);
+	SITE(pv_mmu_ops, read_cr3);
+	SITE(pv_mmu_ops, write_cr3);
+	SITE(pv_cpu_ops, clts);
+	SITE(pv_cpu_ops, read_tsc);
+#undef SITE
+
+	patch_site:
+		ret = paravirt_patch_insns(ibuf, len, start, end);
+		break;
+
+	default:
+		ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
+		break;
+	}
+
+	return ret;
+}
+
+unsigned paravirt_patch_nop(void)
+{
+	return 0;
+}
+
+unsigned paravirt_patch_ignore(unsigned len)
+{
+	return len;
+}
+
+struct branch {
+	unsigned char opcode;
+	u32 delta;
+} __attribute__((packed));
+
+unsigned paravirt_patch_call(void *insnbuf,
+			     const void *target, u16 tgt_clobbers,
+			     unsigned long addr, u16 site_clobbers,
+			     unsigned len)
+{
+	struct branch *b = insnbuf;
+	unsigned long delta = (unsigned long)target - (addr+5);
+
+	if (tgt_clobbers & ~site_clobbers)
+		return len;	/* target would clobber too much for this site */
+	if (len < 5)
+		return len;	/* call too long for patch site */
+
+	b->opcode = 0xe8; /* call */
+	b->delta = delta;
+	BUILD_BUG_ON(sizeof(*b) != 5);
+
+	return 5;
+}
+
+unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
+			    unsigned long addr, unsigned len)
+{
+	struct branch *b = insnbuf;
+	unsigned long delta = (unsigned long)target - (addr+5);
+
+	if (len < 5)
+		return len;	/* call too long for patch site */
+
+	b->opcode = 0xe9;	/* jmp */
+	b->delta = delta;
+
+	return 5;
+}
+
+/* Neat trick to map patch type back to the call within the
+ * corresponding structure. */
+static void *get_call_destination(u8 type)
+{
+	struct paravirt_patch_template tmpl = {
+		.pv_init_ops = pv_init_ops,
+		.pv_time_ops = pv_time_ops,
+		.pv_cpu_ops = pv_cpu_ops,
+		.pv_irq_ops = pv_irq_ops,
+		.pv_apic_ops = pv_apic_ops,
+		.pv_mmu_ops = pv_mmu_ops,
+	};
+	return *((void **)&tmpl + type);
+}
+
+unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
+				unsigned long addr, unsigned len)
+{
+	void *opfunc = get_call_destination(type);
+	unsigned ret;
+
+	if (opfunc == NULL)
+		/* If there's no function, patch it with a ud2a (BUG) */
+		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
+	else if (opfunc == paravirt_nop)
+		/* If the operation is a nop, then nop the callsite */
+		ret = paravirt_patch_nop();
+	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
+		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret))
+		/* If operation requires a jmp, then jmp */
+		ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
+	else
+		/* Otherwise call the function; assume target could
+		   clobber any caller-save reg */
+		ret = paravirt_patch_call(insnbuf, opfunc, CLBR_ANY,
+					  addr, clobbers, len);
+
+	return ret;
+}
+
+unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
+			      const char *start, const char *end)
+{
+	unsigned insn_len = end - start;
+
+	if (insn_len > len || start == NULL)
+		insn_len = len;
+	else
+		memcpy(insnbuf, start, insn_len);
+
+	return insn_len;
+}
+
+void init_IRQ(void)
+{
+	pv_irq_ops.init_IRQ();
+}
+
+static void native_flush_tlb(void)
+{
+	__native_flush_tlb();
+}
+
+/*
+ * Global pages have to be flushed a bit differently. Not a real
+ * performance problem because this does not happen often.
+ */
+static void native_flush_tlb_global(void)
+{
+	__native_flush_tlb_global();
+}
+
+static void native_flush_tlb_single(unsigned long addr)
+{
+	__native_flush_tlb_single(addr);
+}
+
+/* These are in entry.S */
+extern void native_iret(void);
+extern void native_irq_enable_syscall_ret(void);
+
+static int __init print_banner(void)
+{
+	pv_init_ops.banner();
+	return 0;
+}
+core_initcall(print_banner);
+
+static struct resource reserve_ioports = {
+	.start = 0,
+	.end = IO_SPACE_LIMIT,
+	.name = "paravirt-ioport",
+	.flags = IORESOURCE_IO | IORESOURCE_BUSY,
+};
+
+static struct resource reserve_iomem = {
+	.start = 0,
+	.end = -1,
+	.name = "paravirt-iomem",
+	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
+/*
+ * Reserve the whole legacy IO space to prevent any legacy drivers
+ * from wasting time probing for their hardware.  This is a fairly
+ * brute-force approach to disabling all non-virtual drivers.
+ *
+ * Note that this must be called very early to have any effect.
+ */
+int paravirt_disable_iospace(void)
+{
+	int ret;
+
+	ret = request_resource(&ioport_resource, &reserve_ioports);
+	if (ret == 0) {
+		ret = request_resource(&iomem_resource, &reserve_iomem);
+		if (ret)
+			release_resource(&reserve_ioports);
+	}
+
+	return ret;
+}
+
+static DEFINE_PER_CPU(enum paravirt_lazy_mode, paravirt_lazy_mode) = PARAVIRT_LAZY_NONE;
+
+static inline void enter_lazy(enum paravirt_lazy_mode mode)
+{
+	BUG_ON(x86_read_percpu(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
+	BUG_ON(preemptible());
+
+	x86_write_percpu(paravirt_lazy_mode, mode);
+}
+
+void paravirt_leave_lazy(enum paravirt_lazy_mode mode)
+{
+	BUG_ON(x86_read_percpu(paravirt_lazy_mode) != mode);
+	BUG_ON(preemptible());
+
+	x86_write_percpu(paravirt_lazy_mode, PARAVIRT_LAZY_NONE);
+}
+
+void paravirt_enter_lazy_mmu(void)
+{
+	enter_lazy(PARAVIRT_LAZY_MMU);
+}
+
+void paravirt_leave_lazy_mmu(void)
+{
+	paravirt_leave_lazy(PARAVIRT_LAZY_MMU);
+}
+
+void paravirt_enter_lazy_cpu(void)
+{
+	enter_lazy(PARAVIRT_LAZY_CPU);
+}
+
+void paravirt_leave_lazy_cpu(void)
+{
+	paravirt_leave_lazy(PARAVIRT_LAZY_CPU);
+}
+
+enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
+{
+	return x86_read_percpu(paravirt_lazy_mode);
+}
+
+struct pv_info pv_info = {
+	.name = "bare hardware",
+	.paravirt_enabled = 0,
+	.kernel_rpl = 0,
+	.shared_kernel_pmd = 1,	/* Only used when CONFIG_X86_PAE is set */
+};
+
+struct pv_init_ops pv_init_ops = {
+	.patch = native_patch,
+	.banner = default_banner,
+	.arch_setup = paravirt_nop,
+	.memory_setup = machine_specific_memory_setup,
+};
+
+struct pv_time_ops pv_time_ops = {
+	.time_init = hpet_time_init,
+	.get_wallclock = native_get_wallclock,
+	.set_wallclock = native_set_wallclock,
+	.sched_clock = native_sched_clock,
+	.get_cpu_khz = native_calculate_cpu_khz,
+};
+
+struct pv_irq_ops pv_irq_ops = {
+	.init_IRQ = native_init_IRQ,
+	.save_fl = native_save_fl,
+	.restore_fl = native_restore_fl,
+	.irq_disable = native_irq_disable,
+	.irq_enable = native_irq_enable,
+	.safe_halt = native_safe_halt,
+	.halt = native_halt,
+};
+
+struct pv_cpu_ops pv_cpu_ops = {
+	.cpuid = native_cpuid,
+	.get_debugreg = native_get_debugreg,
+	.set_debugreg = native_set_debugreg,
+	.clts = native_clts,
+	.read_cr0 = native_read_cr0,
+	.write_cr0 = native_write_cr0,
+	.read_cr4 = native_read_cr4,
+	.read_cr4_safe = native_read_cr4_safe,
+	.write_cr4 = native_write_cr4,
+	.wbinvd = native_wbinvd,
+	.read_msr = native_read_msr_safe,
+	.write_msr = native_write_msr_safe,
+	.read_tsc = native_read_tsc,
+	.read_pmc = native_read_pmc,
+	.load_tr_desc = native_load_tr_desc,
+	.set_ldt = native_set_ldt,
+	.load_gdt = native_load_gdt,
+	.load_idt = native_load_idt,
+	.store_gdt = native_store_gdt,
+	.store_idt = native_store_idt,
+	.store_tr = native_store_tr,
+	.load_tls = native_load_tls,
+	.write_ldt_entry = native_write_ldt_entry,
+	.write_gdt_entry = native_write_gdt_entry,
+	.write_idt_entry = native_write_idt_entry,
+	.load_sp0 = native_load_sp0,
+
+	.irq_enable_syscall_ret = native_irq_enable_syscall_ret,
+	.iret = native_iret,
+
+	.set_iopl_mask = native_set_iopl_mask,
+	.io_delay = native_io_delay,
+
+	.lazy_mode = {
+		.enter = paravirt_nop,
+		.leave = paravirt_nop,
+	},
+};
+
+struct pv_apic_ops pv_apic_ops = {
+#ifdef CONFIG_X86_LOCAL_APIC
+	.apic_write = native_apic_write,
+	.apic_write_atomic = native_apic_write_atomic,
+	.apic_read = native_apic_read,
+	.setup_boot_clock = setup_boot_APIC_clock,
+	.setup_secondary_clock = setup_secondary_APIC_clock,
+	.startup_ipi_hook = paravirt_nop,
+#endif
+};
+
+struct pv_mmu_ops pv_mmu_ops = {
+	.pagetable_setup_start = native_pagetable_setup_start,
+	.pagetable_setup_done = native_pagetable_setup_done,
+
+	.read_cr2 = native_read_cr2,
+	.write_cr2 = native_write_cr2,
+	.read_cr3 = native_read_cr3,
+	.write_cr3 = native_write_cr3,
+
+	.flush_tlb_user = native_flush_tlb,
+	.flush_tlb_kernel = native_flush_tlb_global,
+	.flush_tlb_single = native_flush_tlb_single,
+	.flush_tlb_others = native_flush_tlb_others,
+
+	.alloc_pt = paravirt_nop,
+	.alloc_pd = paravirt_nop,
+	.alloc_pd_clone = paravirt_nop,
+	.release_pt = paravirt_nop,
+	.release_pd = paravirt_nop,
+
+	.set_pte = native_set_pte,
+	.set_pte_at = native_set_pte_at,
+	.set_pmd = native_set_pmd,
+	.pte_update = paravirt_nop,
+	.pte_update_defer = paravirt_nop,
+
+#ifdef CONFIG_HIGHPTE
+	.kmap_atomic_pte = kmap_atomic,
+#endif
+
+#ifdef CONFIG_X86_PAE
+	.set_pte_atomic = native_set_pte_atomic,
+	.set_pte_present = native_set_pte_present,
+	.set_pud = native_set_pud,
+	.pte_clear = native_pte_clear,
+	.pmd_clear = native_pmd_clear,
+
+	.pmd_val = native_pmd_val,
+	.make_pmd = native_make_pmd,
+#endif
+
+	.pte_val = native_pte_val,
+	.pgd_val = native_pgd_val,
+
+	.make_pte = native_make_pte,
+	.make_pgd = native_make_pgd,
+
+	.dup_mmap = paravirt_nop,
+	.exit_mmap = paravirt_nop,
+	.activate_mm = paravirt_nop,
+
+	.lazy_mode = {
+		.enter = paravirt_nop,
+		.leave = paravirt_nop,
+	},
+};
+
+EXPORT_SYMBOL_GPL(pv_time_ops);
+EXPORT_SYMBOL    (pv_cpu_ops);
+EXPORT_SYMBOL    (pv_mmu_ops);
+EXPORT_SYMBOL_GPL(pv_apic_ops);
+EXPORT_SYMBOL_GPL(pv_info);
+EXPORT_SYMBOL    (pv_irq_ops);
Index: linux-2.6-x86/arch/x86/kernel/paravirt_32.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/paravirt_32.c	2007-12-20 19:07:08.000000000 -0800
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,472 +0,0 @@
-/*  Paravirtualization interfaces
-    Copyright (C) 2006 Rusty Russell IBM Corporation
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/efi.h>
-#include <linux/bcd.h>
-#include <linux/highmem.h>
-
-#include <asm/bug.h>
-#include <asm/paravirt.h>
-#include <asm/desc.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-#include <asm/time.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/fixmap.h>
-#include <asm/apic.h>
-#include <asm/tlbflush.h>
-#include <asm/timer.h>
-
-/* nop stub */
-void _paravirt_nop(void)
-{
-}
-
-static void __init default_banner(void)
-{
-	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
-	       pv_info.name);
-}
-
-char *memory_setup(void)
-{
-	return pv_init_ops.memory_setup();
-}
-
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code)					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
-	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
-DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
-DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
-DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
-DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
-DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
-DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
-DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
-DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
-DEF_NATIVE(pv_cpu_ops, clts, "clts");
-DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
-
-/* Undefined instruction for dealing with missing ops pointers. */
-static const unsigned char ud2a[] = { 0x0f, 0x0b };
-
-static unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-			     unsigned long addr, unsigned len)
-{
-	const unsigned char *start, *end;
-	unsigned ret;
-
-	switch(type) {
-#define SITE(ops, x)						\
-	case PARAVIRT_PATCH(ops.x):				\
-		start = start_##ops##_##x;			\
-		end = end_##ops##_##x;				\
-		goto patch_site
-
-	SITE(pv_irq_ops, irq_disable);
-	SITE(pv_irq_ops, irq_enable);
-	SITE(pv_irq_ops, restore_fl);
-	SITE(pv_irq_ops, save_fl);
-	SITE(pv_cpu_ops, iret);
-	SITE(pv_cpu_ops, irq_enable_syscall_ret);
-	SITE(pv_mmu_ops, read_cr2);
-	SITE(pv_mmu_ops, read_cr3);
-	SITE(pv_mmu_ops, write_cr3);
-	SITE(pv_cpu_ops, clts);
-	SITE(pv_cpu_ops, read_tsc);
-#undef SITE
-
-	patch_site:
-		ret = paravirt_patch_insns(ibuf, len, start, end);
-		break;
-
-	default:
-		ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
-		break;
-	}
-
-	return ret;
-}
-
-unsigned paravirt_patch_nop(void)
-{
-	return 0;
-}
-
-unsigned paravirt_patch_ignore(unsigned len)
-{
-	return len;
-}
-
-struct branch {
-	unsigned char opcode;
-	u32 delta;
-} __attribute__((packed));
-
-unsigned paravirt_patch_call(void *insnbuf,
-			     const void *target, u16 tgt_clobbers,
-			     unsigned long addr, u16 site_clobbers,
-			     unsigned len)
-{
-	struct branch *b = insnbuf;
-	unsigned long delta = (unsigned long)target - (addr+5);
-
-	if (tgt_clobbers & ~site_clobbers)
-		return len;	/* target would clobber too much for this site */
-	if (len < 5)
-		return len;	/* call too long for patch site */
-
-	b->opcode = 0xe8; /* call */
-	b->delta = delta;
-	BUILD_BUG_ON(sizeof(*b) != 5);
-
-	return 5;
-}
-
-unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
-			    unsigned long addr, unsigned len)
-{
-	struct branch *b = insnbuf;
-	unsigned long delta = (unsigned long)target - (addr+5);
-
-	if (len < 5)
-		return len;	/* call too long for patch site */
-
-	b->opcode = 0xe9;	/* jmp */
-	b->delta = delta;
-
-	return 5;
-}
-
-/* Neat trick to map patch type back to the call within the
- * corresponding structure. */
-static void *get_call_destination(u8 type)
-{
-	struct paravirt_patch_template tmpl = {
-		.pv_init_ops = pv_init_ops,
-		.pv_time_ops = pv_time_ops,
-		.pv_cpu_ops = pv_cpu_ops,
-		.pv_irq_ops = pv_irq_ops,
-		.pv_apic_ops = pv_apic_ops,
-		.pv_mmu_ops = pv_mmu_ops,
-	};
-	return *((void **)&tmpl + type);
-}
-
-unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
-				unsigned long addr, unsigned len)
-{
-	void *opfunc = get_call_destination(type);
-	unsigned ret;
-
-	if (opfunc == NULL)
-		/* If there's no function, patch it with a ud2a (BUG) */
-		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
-	else if (opfunc == paravirt_nop)
-		/* If the operation is a nop, then nop the callsite */
-		ret = paravirt_patch_nop();
-	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
-		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret))
-		/* If operation requires a jmp, then jmp */
-		ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
-	else
-		/* Otherwise call the function; assume target could
-		   clobber any caller-save reg */
-		ret = paravirt_patch_call(insnbuf, opfunc, CLBR_ANY,
-					  addr, clobbers, len);
-
-	return ret;
-}
-
-unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
-			      const char *start, const char *end)
-{
-	unsigned insn_len = end - start;
-
-	if (insn_len > len || start == NULL)
-		insn_len = len;
-	else
-		memcpy(insnbuf, start, insn_len);
-
-	return insn_len;
-}
-
-void init_IRQ(void)
-{
-	pv_irq_ops.init_IRQ();
-}
-
-static void native_flush_tlb(void)
-{
-	__native_flush_tlb();
-}
-
-/*
- * Global pages have to be flushed a bit differently. Not a real
- * performance problem because this does not happen often.
- */
-static void native_flush_tlb_global(void)
-{
-	__native_flush_tlb_global();
-}
-
-static void native_flush_tlb_single(unsigned long addr)
-{
-	__native_flush_tlb_single(addr);
-}
-
-/* These are in entry.S */
-extern void native_iret(void);
-extern void native_irq_enable_syscall_ret(void);
-
-static int __init print_banner(void)
-{
-	pv_init_ops.banner();
-	return 0;
-}
-core_initcall(print_banner);
-
-static struct resource reserve_ioports = {
-	.start = 0,
-	.end = IO_SPACE_LIMIT,
-	.name = "paravirt-ioport",
-	.flags = IORESOURCE_IO | IORESOURCE_BUSY,
-};
-
-static struct resource reserve_iomem = {
-	.start = 0,
-	.end = -1,
-	.name = "paravirt-iomem",
-	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
-/*
- * Reserve the whole legacy IO space to prevent any legacy drivers
- * from wasting time probing for their hardware.  This is a fairly
- * brute-force approach to disabling all non-virtual drivers.
- *
- * Note that this must be called very early to have any effect.
- */
-int paravirt_disable_iospace(void)
-{
-	int ret;
-
-	ret = request_resource(&ioport_resource, &reserve_ioports);
-	if (ret == 0) {
-		ret = request_resource(&iomem_resource, &reserve_iomem);
-		if (ret)
-			release_resource(&reserve_ioports);
-	}
-
-	return ret;
-}
-
-static DEFINE_PER_CPU(enum paravirt_lazy_mode, paravirt_lazy_mode) = PARAVIRT_LAZY_NONE;
-
-static inline void enter_lazy(enum paravirt_lazy_mode mode)
-{
-	BUG_ON(x86_read_percpu(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
-	BUG_ON(preemptible());
-
-	x86_write_percpu(paravirt_lazy_mode, mode);
-}
-
-void paravirt_leave_lazy(enum paravirt_lazy_mode mode)
-{
-	BUG_ON(x86_read_percpu(paravirt_lazy_mode) != mode);
-	BUG_ON(preemptible());
-
-	x86_write_percpu(paravirt_lazy_mode, PARAVIRT_LAZY_NONE);
-}
-
-void paravirt_enter_lazy_mmu(void)
-{
-	enter_lazy(PARAVIRT_LAZY_MMU);
-}
-
-void paravirt_leave_lazy_mmu(void)
-{
-	paravirt_leave_lazy(PARAVIRT_LAZY_MMU);
-}
-
-void paravirt_enter_lazy_cpu(void)
-{
-	enter_lazy(PARAVIRT_LAZY_CPU);
-}
-
-void paravirt_leave_lazy_cpu(void)
-{
-	paravirt_leave_lazy(PARAVIRT_LAZY_CPU);
-}
-
-enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
-{
-	return x86_read_percpu(paravirt_lazy_mode);
-}
-
-struct pv_info pv_info = {
-	.name = "bare hardware",
-	.paravirt_enabled = 0,
-	.kernel_rpl = 0,
-	.shared_kernel_pmd = 1,	/* Only used when CONFIG_X86_PAE is set */
-};
-
-struct pv_init_ops pv_init_ops = {
-	.patch = native_patch,
-	.banner = default_banner,
-	.arch_setup = paravirt_nop,
-	.memory_setup = machine_specific_memory_setup,
-};
-
-struct pv_time_ops pv_time_ops = {
-	.time_init = hpet_time_init,
-	.get_wallclock = native_get_wallclock,
-	.set_wallclock = native_set_wallclock,
-	.sched_clock = native_sched_clock,
-	.get_cpu_khz = native_calculate_cpu_khz,
-};
-
-struct pv_irq_ops pv_irq_ops = {
-	.init_IRQ = native_init_IRQ,
-	.save_fl = native_save_fl,
-	.restore_fl = native_restore_fl,
-	.irq_disable = native_irq_disable,
-	.irq_enable = native_irq_enable,
-	.safe_halt = native_safe_halt,
-	.halt = native_halt,
-};
-
-struct pv_cpu_ops pv_cpu_ops = {
-	.cpuid = native_cpuid,
-	.get_debugreg = native_get_debugreg,
-	.set_debugreg = native_set_debugreg,
-	.clts = native_clts,
-	.read_cr0 = native_read_cr0,
-	.write_cr0 = native_write_cr0,
-	.read_cr4 = native_read_cr4,
-	.read_cr4_safe = native_read_cr4_safe,
-	.write_cr4 = native_write_cr4,
-	.wbinvd = native_wbinvd,
-	.read_msr = native_read_msr_safe,
-	.write_msr = native_write_msr_safe,
-	.read_tsc = native_read_tsc,
-	.read_pmc = native_read_pmc,
-	.load_tr_desc = native_load_tr_desc,
-	.set_ldt = native_set_ldt,
-	.load_gdt = native_load_gdt,
-	.load_idt = native_load_idt,
-	.store_gdt = native_store_gdt,
-	.store_idt = native_store_idt,
-	.store_tr = native_store_tr,
-	.load_tls = native_load_tls,
-	.write_ldt_entry = native_write_ldt_entry,
-	.write_gdt_entry = native_write_gdt_entry,
-	.write_idt_entry = native_write_idt_entry,
-	.load_sp0 = native_load_sp0,
-
-	.irq_enable_syscall_ret = native_irq_enable_syscall_ret,
-	.iret = native_iret,
-
-	.set_iopl_mask = native_set_iopl_mask,
-	.io_delay = native_io_delay,
-
-	.lazy_mode = {
-		.enter = paravirt_nop,
-		.leave = paravirt_nop,
-	},
-};
-
-struct pv_apic_ops pv_apic_ops = {
-#ifdef CONFIG_X86_LOCAL_APIC
-	.apic_write = native_apic_write,
-	.apic_write_atomic = native_apic_write_atomic,
-	.apic_read = native_apic_read,
-	.setup_boot_clock = setup_boot_APIC_clock,
-	.setup_secondary_clock = setup_secondary_APIC_clock,
-	.startup_ipi_hook = paravirt_nop,
-#endif
-};
-
-struct pv_mmu_ops pv_mmu_ops = {
-	.pagetable_setup_start = native_pagetable_setup_start,
-	.pagetable_setup_done = native_pagetable_setup_done,
-
-	.read_cr2 = native_read_cr2,
-	.write_cr2 = native_write_cr2,
-	.read_cr3 = native_read_cr3,
-	.write_cr3 = native_write_cr3,
-
-	.flush_tlb_user = native_flush_tlb,
-	.flush_tlb_kernel = native_flush_tlb_global,
-	.flush_tlb_single = native_flush_tlb_single,
-	.flush_tlb_others = native_flush_tlb_others,
-
-	.alloc_pt = paravirt_nop,
-	.alloc_pd = paravirt_nop,
-	.alloc_pd_clone = paravirt_nop,
-	.release_pt = paravirt_nop,
-	.release_pd = paravirt_nop,
-
-	.set_pte = native_set_pte,
-	.set_pte_at = native_set_pte_at,
-	.set_pmd = native_set_pmd,
-	.pte_update = paravirt_nop,
-	.pte_update_defer = paravirt_nop,
-
-#ifdef CONFIG_HIGHPTE
-	.kmap_atomic_pte = kmap_atomic,
-#endif
-
-#ifdef CONFIG_X86_PAE
-	.set_pte_atomic = native_set_pte_atomic,
-	.set_pte_present = native_set_pte_present,
-	.set_pud = native_set_pud,
-	.pte_clear = native_pte_clear,
-	.pmd_clear = native_pmd_clear,
-
-	.pmd_val = native_pmd_val,
-	.make_pmd = native_make_pmd,
-#endif
-
-	.pte_val = native_pte_val,
-	.pgd_val = native_pgd_val,
-
-	.make_pte = native_make_pte,
-	.make_pgd = native_make_pgd,
-
-	.dup_mmap = paravirt_nop,
-	.exit_mmap = paravirt_nop,
-	.activate_mm = paravirt_nop,
-
-	.lazy_mode = {
-		.enter = paravirt_nop,
-		.leave = paravirt_nop,
-	},
-};
-
-EXPORT_SYMBOL_GPL(pv_time_ops);
-EXPORT_SYMBOL    (pv_cpu_ops);
-EXPORT_SYMBOL    (pv_mmu_ops);
-EXPORT_SYMBOL_GPL(pv_apic_ops);
-EXPORT_SYMBOL_GPL(pv_info);
-EXPORT_SYMBOL    (pv_irq_ops);

[PATCH 02/15] adjust PVOP_CALL/VCALL macros for x86_64

[Glauber de Oliveira Costa]

This patch adjust the PVOP_VCALL and PVOP_CALL macros to
work with x86_64. It has a different calling convention, and
we use auxiliary macros to account for both calling conventions
as cleanly as possible

Comments are adjusted accordingly.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/paravirt.h |   87 +++++++++++++++++++++++++++++++++-----------
 1 files changed, 65 insertions(+), 22 deletions(-)

Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:07.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:17.000000000 -0800
@@ -320,7 +320,7 @@
  * runtime.
  *
  * Normally, a call to a pv_op function is a simple indirect call:
- * (paravirt_ops.operations)(args...).
+ * (pv_op_struct.operations)(args...).
  *
  * Unfortunately, this is a relatively slow operation for modern CPUs,
  * because it cannot necessarily determine what the destination
@@ -330,11 +330,17 @@
  * calls are essentially free, because the call and return addresses
  * are completely predictable.)
  *
- * These macros rely on the standard gcc "regparm(3)" calling
+ * For i386, these macros rely on the standard gcc "regparm(3)" calling
  * convention, in which the first three arguments are placed in %eax,
  * %edx, %ecx (in that order), and the remaining arguments are placed
  * on the stack.  All caller-save registers (eax,edx,ecx) are expected
  * to be modified (either clobbered or used for return values).
+ * X86_64, on the other hand, already specifies a register-based calling
+ * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
+ * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
+ * special handling for dealing with 4 arguments, unlike i386.
+ * However, x86_64 also have to clobber all caller saved registers, which
+ * unfortunately, are quite a bit (r8 - r11)
  *
  * The call instruction itself is marked by placing its start address
  * and size into the .parainstructions section, so that
@@ -357,10 +363,12 @@
  * the return type.  The macro then uses sizeof() on that type to
  * determine whether its a 32 or 64 bit value, and places the return
  * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
- * 64-bit).
+ * 64-bit). For x86_64 machines, it just returns at %rax regardless of
+ * the return value size.
  *
  * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
- * in low,high order.
+ * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
+ * in low,high order
  *
  * Small structures are passed and returned in registers.  The macro
  * calling convention can't directly deal with this, so the wrapper
@@ -370,46 +378,67 @@
  * means that all uses must be wrapped in inline functions.  This also
  * makes sure the incoming and outgoing types are always correct.
  */
+#ifdef CONFIG_X86_32
+#define PVOP_VCALL_ARGS			unsigned long __eax, __edx, __ecx
+#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
+					"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+#define EXTRA_CLOBBERS
+#define VEXTRA_CLOBBERS
+#else
+#define PVOP_VCALL_ARGS		unsigned long __edi, __esi, __edx, __ecx
+#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
+				"=S" (__esi), "=d" (__edx),		\
+				"=c" (__ecx)
+
+#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
+
+#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
+#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
+#endif
+
 #define __PVOP_CALL(rettype, op, pre, post, ...)			\
 	({								\
 		rettype __ret;						\
-		unsigned long __eax, __edx, __ecx;			\
+		PVOP_CALL_ARGS;					\
+		/* This is 32-bit specific, but is okay in 64-bit */	\
+		/* since this condition will never hold */		\
 		if (sizeof(rettype) > sizeof(unsigned long)) {		\
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : "=a" (__eax), "=d" (__edx),	\
-				       "=c" (__ecx)			\
+				     : PVOP_CALL_CLOBBERS		\
 				     : paravirt_type(op),		\
 				       paravirt_clobber(CLBR_ANY),	\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc");			\
+				     : "memory", "cc" EXTRA_CLOBBERS);	\
 			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
 		} else {						\
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : "=a" (__eax), "=d" (__edx),	\
-				       "=c" (__ecx)			\
+				     : PVOP_CALL_CLOBBERS		\
 				     : paravirt_type(op),		\
 				       paravirt_clobber(CLBR_ANY),	\
 				       ##__VA_ARGS__			\
-				     : "memory", "cc");			\
+				     : "memory", "cc" EXTRA_CLOBBERS);	\
 			__ret = (rettype)__eax;				\
 		}							\
 		__ret;							\
 	})
 #define __PVOP_VCALL(op, pre, post, ...)				\
 	({								\
-		unsigned long __eax, __edx, __ecx;			\
+		PVOP_VCALL_ARGS;					\
 		asm volatile(pre					\
 			     paravirt_alt(PARAVIRT_CALL)		\
 			     post					\
-			     : "=a" (__eax), "=d" (__edx), "=c" (__ecx) \
+			     : PVOP_VCALL_CLOBBERS			\
 			     : paravirt_type(op),			\
 			       paravirt_clobber(CLBR_ANY),		\
 			       ##__VA_ARGS__				\
-			     : "memory", "cc");				\
+			     : "memory", "cc" VEXTRA_CLOBBERS);		\
 	})
 
 #define PVOP_CALL0(rettype, op)						\
@@ -418,22 +447,26 @@
 	__PVOP_VCALL(op, "", "")
 
 #define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", "0" ((u32)(arg1)))
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)))
 #define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", "0" ((u32)(arg1)))
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)))
 
 #define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", "0" ((u32)(arg1)), "1" ((u32)(arg2)))
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)), 	\
+	"1" ((unsigned long)(arg2)))
 #define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", "0" ((u32)(arg1)), "1" ((u32)(arg2)))
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)), 		\
+	"1" ((unsigned long)(arg2)))
 
 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", "0" ((u32)(arg1)),		\
-		    "1"((u32)(arg2)), "2"((u32)(arg3)))
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
 #define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", "0" ((u32)(arg1)), "1"((u32)(arg2)),	\
-		     "2"((u32)(arg3)))
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)))
 
+/* This is the only difference in x86_64. We can make it much simpler */
+#ifdef CONFIG_X86_32
 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
 	__PVOP_CALL(rettype, op,					\
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
@@ -444,6 +477,16 @@
 		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
 		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
 		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#else
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op, "", "", "0" ((unsigned long)(arg1)),	\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
+	"3"((unsigned long)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op, "", "", "0" ((unsigned long)(arg1)),		\
+	"1"((unsigned long)(arg2)), "2"((unsigned long)(arg3)),		\
+	"3"((unsigned long)(arg4)))
+#endif
 
 static inline int paravirt_enabled(void)
 {

[PATCH 03/15] cleanup write_tsc

[Glauber de Oliveira Costa]

write_tsc() does not need to be enclosed in any paravirt closure,
as it uses wrmsr(). So we rip off the duplicate in msr.h
and the definition from paravirt.h

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/msr.h      |    2 --
 include/asm-x86/paravirt.h |    2 --
 2 files changed, 0 insertions(+), 4 deletions(-)

Index: linux-2.6-x86/include/asm-x86/msr.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/msr.h	2007-12-20 19:06:59.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/msr.h	2007-12-20 19:07:18.000000000 -0800
@@ -153,8 +153,6 @@
 #define rdtscll(val)						\
 	((val) = native_read_tsc())
 
-#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
-
 #define rdpmc(counter,low,high)					\
 	do {							\
 		u64 _l = native_read_pmc(counter);		\
Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:17.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:18.000000000 -0800
@@ -657,8 +657,6 @@
 }
 #define calculate_cpu_khz() (pv_time_ops.get_cpu_khz())
 
-#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
-
 static inline unsigned long long paravirt_read_pmc(int counter)
 {
 	return PVOP_CALL1(u64, pv_cpu_ops.read_pmc, counter);

[PATCH 04/15] provide paravirtualized hook for rdtscp

[Glauber de Oliveira Costa]

This patch adds a field in pv_cpu_ops for a paravirtualized hook
for rdtscp, needed for x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/paravirt.c |    1 +
 include/asm-x86/paravirt.h |   22 ++++++++++++++++++++++
 2 files changed, 23 insertions(+), 0 deletions(-)

Index: linux-2.6-x86/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/paravirt.c	2007-12-20 19:07:15.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/paravirt.c	2007-12-20 19:07:22.000000000 -0800
@@ -374,6 +374,7 @@
 	.write_msr = native_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
+	.read_tscp = native_read_tscp,
 	.load_tr_desc = native_load_tr_desc,
 	.set_ldt = native_set_ldt,
 	.load_gdt = native_load_gdt,
Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:18.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:22.000000000 -0800
@@ -120,6 +120,7 @@
 
 	u64 (*read_tsc)(void);
 	u64 (*read_pmc)(int counter);
+	unsigned long long (*read_tscp)(unsigned int *aux);
 
 	/* These two are jmp to, not actually called. */
 	void (*irq_enable_syscall_ret)(void);
@@ -668,6 +669,27 @@
 	high = _l >> 32;			\
 } while(0)
 
+static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
+{
+	return PVOP_CALL1(u64, pv_cpu_ops.read_tscp, aux);
+}
+
+#define rdtscp(low, high, aux)				\
+do {							\
+	int __aux;					\
+	unsigned long __val = paravirt_rdtscp(&__aux);	\
+	(low) = (u32)__val;				\
+	(high) = (u32)(__val >> 32);			\
+	(aux) = __aux;					\
+} while (0)
+
+#define rdtscpll(val, aux)				\
+do {							\
+	unsigned long __aux; 				\
+	val = paravirt_rdtscp(&__aux);			\
+	(aux) = __aux;					\
+} while (0)
+
 static inline void load_TR_desc(void)
 {
 	PVOP_VCALL0(pv_cpu_ops.load_tr_desc);

[PATCH 05/15] change assembly definition of paravirt_patch_site

[Glauber de Oliveira Costa]

To account for differences in x86_64, we change the macros that
create raw instances of the paravirt_patch_site struct.
We need to align 64-pointers to 64-bit boundaries, so we add an alignment
directive. Also, we need to make room for a word-sized pointer,
instead of a fixed 32-bit one

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/paravirt.h |   16 +++++++++++++---
 1 files changed, 13 insertions(+), 3 deletions(-)

Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:22.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:25.000000000 -0800
@@ -5,6 +5,7 @@
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/page.h>
+#include <asm/asm.h>
 
 /* Bitmask of what can be clobbered: usually at least eax. */
 #define CLBR_NONE 0x0
@@ -281,7 +282,8 @@
 #define _paravirt_alt(insn_string, type, clobber)	\
 	"771:\n\t" insn_string "\n" "772:\n"		\
 	".pushsection .parainstructions,\"a\"\n"	\
-	"  .long 771b\n"				\
+	_ASM_ALIGN "\n"					\
+	_ASM_PTR " 771b\n"				\
 	"  .byte " type "\n"				\
 	"  .byte 772b-771b\n"				\
 	"  .short " clobber "\n"			\
@@ -1159,17 +1161,25 @@
 
 #define PARA_PATCH(struct, off)	((PARAVIRT_PATCH_##struct + (off)) / 4)
 
-#define PARA_SITE(ptype, clobbers, ops)		\
+#define _PVSITE(ptype, clobbers, ops, word, algn)	\
 771:;						\
 	ops;					\
 772:;						\
 	.pushsection .parainstructions,"a";	\
-	 .long 771b;				\
+	 .align	algn;				\
+	 word 771b;				\
 	 .byte ptype;				\
 	 .byte 772b-771b;			\
 	 .short clobbers;			\
 	.popsection
 
+
+#ifdef CONFIG_X86_64
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
+#else
+#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
+#endif
+
 #define INTERRUPT_RETURN						\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_iret), CLBR_NONE,	\
 		  jmp *%cs:pv_cpu_ops+PV_CPU_iret)

[PATCH 06/15] adjust assembly macros to x86_64 as well.

[Glauber de Oliveira Costa]

This patch adjust the paravirt macros used in assembly code
to accomodate for x86_64 as well.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/paravirt.h |   18 ++++++++++++------
 1 files changed, 12 insertions(+), 6 deletions(-)

Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:25.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:27.000000000 -0800
@@ -1159,8 +1159,6 @@
 
 #else  /* __ASSEMBLY__ */
 
-#define PARA_PATCH(struct, off)	((PARAVIRT_PATCH_##struct + (off)) / 4)
-
 #define _PVSITE(ptype, clobbers, ops, word, algn)	\
 771:;						\
 	ops;					\
@@ -1175,8 +1173,14 @@
 
 
 #ifdef CONFIG_X86_64
+#define PV_SAVE_REGS   pushq %rax; pushq %rdi; pushq %rcx; pushq %rdx
+#define PV_RESTORE_REGS popq %rdx; popq %rcx; popq %rdi; popq %rax
+#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 8)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
 #else
+#define PV_SAVE_REGS   pushl %eax; pushl %edi; pushl %ecx; pushl %edx
+#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PARA_PATCH(struct, off)        ((PARAVIRT_PATCH_##struct + (off)) / 4)
 #define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
 #endif
 
@@ -1186,25 +1190,27 @@
 
 #define DISABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
-		  pushl %eax; pushl %ecx; pushl %edx;			\
+		  PV_SAVE_REGS;			\
 		  call *%cs:pv_irq_ops+PV_IRQ_irq_disable;		\
-		  popl %edx; popl %ecx; popl %eax)			\
+		  PV_RESTORE_REGS;)			\
 
 #define ENABLE_INTERRUPTS(clobbers)					\
 	PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers,	\
-		  pushl %eax; pushl %ecx; pushl %edx;			\
+		  PV_SAVE_REGS;			\
 		  call *%cs:pv_irq_ops+PV_IRQ_irq_enable;		\
-		  popl %edx; popl %ecx; popl %eax)
+		  PV_RESTORE_REGS;)
 
 #define ENABLE_INTERRUPTS_SYSCALL_RET					\
 	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_syscall_ret),\
 		  CLBR_NONE,						\
 		  jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_syscall_ret)
 
+#ifdef CONFIG_X86_32
 #define GET_CR0_INTO_EAX			\
 	push %ecx; push %edx;			\
 	call *pv_cpu_ops+PV_CPU_read_cr0;	\
 	pop %edx; pop %ecx
+#endif
 
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_PARAVIRT */

[PATCH 07/15] change irq functions to accomodate x86_64

[Glauber de Oliveira Costa]

This patch changes the irq handling function definitions
in paravirt.h (like raw_local_irq_disable) to accomodate for x86_64.
The differences are in the calling convention.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/paravirt.h |   43 ++++++++++++++++++++++++++++++-------------
 1 files changed, 30 insertions(+), 13 deletions(-)

Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:27.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:28.000000000 -0800
@@ -1085,52 +1085,68 @@
 extern struct paravirt_patch_site __parainstructions[],
 	__parainstructions_end[];
 
+#ifdef CONFIG_X86_32
+#define PV_SAVE_REGS "pushl %%ecx; pushl %%edx;"
+#define PV_RESTORE_REGS "popl %%edx; popl %%ecx"
+#define PV_FLAGS_ARG "0"
+#define PV_EXTRA_CLOBBERS
+#define PV_VEXTRA_CLOBBERS
+#else
+/* We save some registers, but all of them, that's too much. We clobber all
+ * caller saved registers but the argument parameter */
+#define PV_SAVE_REGS "pushq %%rdi;"
+#define PV_RESTORE_REGS "popq %%rdi;"
+#define PV_EXTRA_CLOBBERS EXTRA_CLOBBERS, "rcx" , "rdx"
+#define PV_VEXTRA_CLOBBERS EXTRA_CLOBBERS, "rdi", "rcx" , "rdx"
+#define PV_FLAGS_ARG "D"
+#endif
+
 static inline unsigned long __raw_local_save_flags(void)
 {
 	unsigned long f;
 
-	asm volatile(paravirt_alt("pushl %%ecx; pushl %%edx;"
+	asm volatile(paravirt_alt(PV_SAVE_REGS
 				  PARAVIRT_CALL
-				  "popl %%edx; popl %%ecx")
+				  PV_RESTORE_REGS)
 		     : "=a"(f)
 		     : paravirt_type(pv_irq_ops.save_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc");
+		     : "memory", "cc" PV_VEXTRA_CLOBBERS);
 	return f;
 }
 
 static inline void raw_local_irq_restore(unsigned long f)
 {
-	asm volatile(paravirt_alt("pushl %%ecx; pushl %%edx;"
+	asm volatile(paravirt_alt(PV_SAVE_REGS
 				  PARAVIRT_CALL
-				  "popl %%edx; popl %%ecx")
+				  PV_RESTORE_REGS)
 		     : "=a"(f)
-		     : "0"(f),
+		     : PV_FLAGS_ARG(f),
 		       paravirt_type(pv_irq_ops.restore_fl),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "cc");
+		     : "memory", "cc" PV_EXTRA_CLOBBERS);
 }
 
 static inline void raw_local_irq_disable(void)
 {
-	asm volatile(paravirt_alt("pushl %%ecx; pushl %%edx;"
+	asm volatile(paravirt_alt(PV_SAVE_REGS
 				  PARAVIRT_CALL
-				  "popl %%edx; popl %%ecx")
+				  PV_RESTORE_REGS)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_disable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc");
+		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
 }
 
 static inline void raw_local_irq_enable(void)
 {
-	asm volatile(paravirt_alt("pushl %%ecx; pushl %%edx;"
+	asm volatile(paravirt_alt(PV_SAVE_REGS
 				  PARAVIRT_CALL
-				  "popl %%edx; popl %%ecx")
+				  PV_RESTORE_REGS)
 		     :
 		     : paravirt_type(pv_irq_ops.irq_enable),
 		       paravirt_clobber(CLBR_EAX)
-		     : "memory", "eax", "cc");
+		     : "memory", "eax", "cc" PV_EXTRA_CLOBBERS);
 }
 
 static inline unsigned long __raw_local_irq_save(void)
@@ -1205,6 +1221,7 @@
 		  CLBR_NONE,						\
 		  jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_syscall_ret)
 
+
 #ifdef CONFIG_X86_32
 #define GET_CR0_INTO_EAX			\
 	push %ecx; push %edx;			\

[PATCH 08/15] add macro for privileged x86_64 operation

[Glauber de Oliveira Costa]

i386 has a macro GET_CR0_INTO_EAX, used in early trap handling code.
x86_64 has similar needs, only it needs to put cr2 into rcx. We provide
a macro for such task, in the same way

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/paravirt.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:28.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:07:29.000000000 -0800
@@ -1227,6 +1227,12 @@
 	push %ecx; push %edx;			\
 	call *pv_cpu_ops+PV_CPU_read_cr0;	\
 	pop %edx; pop %ecx
+#else
+#define GET_CR2_INTO_RCX			\
+	call *pv_mmu_ops+PV_MMU_read_cr2;	\
+	movq %rax, %rcx;			\
+	xorq %rax, %rax;
+
 #endif
 
 #endif /* __ASSEMBLY__ */

[PATCH 09/15] adds paravirt hook for swapgs

[Glauber de Oliveira Costa]

This patch adds paravirt hook for swapgs operation, which is a privileged
operation in x86_64.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/paravirt.c  |    1 +
 include/asm-x86/paravirt.h  |    9 +++++++++
 include/asm-x86/processor.h |    8 ++++++++
 3 files changed, 18 insertions(+), 0 deletions(-)

Index: linux-2.6-x86/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/paravirt.c	2007-12-20 19:07:22.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/paravirt.c	2007-12-20 19:08:06.000000000 -0800
@@ -390,6 +390,7 @@
 
 	.irq_enable_syscall_ret = native_irq_enable_syscall_ret,
 	.iret = native_iret,
+	.swapgs = native_swapgs,
 
 	.set_iopl_mask = native_set_iopl_mask,
 	.io_delay = native_io_delay,
Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:07:29.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:08:06.000000000 -0800
@@ -127,6 +127,8 @@
 	void (*irq_enable_syscall_ret)(void);
 	void (*iret)(void);
 
+	void (*swapgs)(void);
+
 	struct pv_lazy_ops lazy_mode;
 };
 
@@ -1228,6 +1230,13 @@
 	call *pv_cpu_ops+PV_CPU_read_cr0;	\
 	pop %edx; pop %ecx
 #else
+#define SWAPGS								\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE,	\
+		  PV_SAVE_REGS						\
+		  call *pv_cpu_ops+PV_CPU_swapgs;			\
+		  PV_RESTORE_REGS					\
+		 )
+
 #define GET_CR2_INTO_RCX			\
 	call *pv_mmu_ops+PV_MMU_read_cr2;	\
 	movq %rax, %rcx;			\
Index: linux-2.6-x86/include/asm-x86/processor.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/processor.h	2007-12-20 19:06:59.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/processor.h	2007-12-20 19:08:06.000000000 -0800
@@ -435,6 +435,13 @@
 #endif
 }
 
+static inline void native_swapgs(void)
+{
+#ifdef CONFIG_X86_64
+	asm volatile("swapgs" ::: "memory");
+#endif
+}
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
@@ -456,6 +463,7 @@
 }
 
 #define set_iopl_mask native_set_iopl_mask
+#define SWAPGS	swapgs
 #endif /* CONFIG_PARAVIRT */
 
 /*

[PATCH 10/15] replace privileged instructions with paravirt macros

[Glauber de Oliveira Costa]

The assembly code in entry_64.S issues a bunch of privileged instructions,
like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so,
and we then replace them with macros that will do the right thing.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/entry_64.S |  101 +++++++++++++++++++++++++------------------
 1 files changed, 59 insertions(+), 42 deletions(-)

Index: linux-2.6-x86/arch/x86/kernel/entry_64.S
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/entry_64.S	2007-12-20 19:06:59.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/entry_64.S	2007-12-20 19:08:08.000000000 -0800
@@ -50,6 +50,7 @@
 #include <asm/hw_irq.h>
 #include <asm/page.h>
 #include <asm/irqflags.h>
+#include <asm/paravirt.h>
 
 	.code64
 
@@ -57,6 +58,13 @@
 #define retint_kernel retint_restore_args
 #endif	
 
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_irq_enable_syscall_ret)
+	movq	%gs:pda_oldrsp,%rsp
+	swapgs
+	sysretq
+#endif /* CONFIG_PARAVIRT */
+
 
 .macro TRACE_IRQS_IRETQ offset=ARGOFFSET
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -216,14 +224,21 @@
 	CFI_DEF_CFA	rsp,PDA_STACKOFFSET
 	CFI_REGISTER	rip,rcx
 	/*CFI_REGISTER	rflags,r11*/
-	swapgs
+	SWAPGS_UNSAFE_STACK
+	/*
+	 * A hypervisor implementation might want to use a label
+	 * after the swapgs, so that it can do the swapgs
+	 * for the guest and jump here on syscall.
+	 */
+ENTRY(system_call_after_swapgs)
+
 	movq	%rsp,%gs:pda_oldrsp 
 	movq	%gs:pda_kernelstack,%rsp
 	/*
 	 * No need to follow this irqs off/on section - it's straight
 	 * and short:
 	 */
-	sti					
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_ARGS 8,1
 	movq  %rax,ORIG_RAX-ARGOFFSET(%rsp) 
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
@@ -246,7 +261,7 @@
 sysret_check:		
 	LOCKDEP_SYS_EXIT
 	GET_THREAD_INFO(%rcx)
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	movl threadinfo_flags(%rcx),%edx
 	andl %edi,%edx
@@ -260,9 +275,7 @@
 	CFI_REGISTER	rip,rcx
 	RESTORE_ARGS 0,-ARG_SKIP,1
 	/*CFI_REGISTER	rflags,r11*/
-	movq	%gs:pda_oldrsp,%rsp
-	swapgs
-	sysretq
+	ENABLE_INTERRUPTS_SYSCALL_RET
 
 	CFI_RESTORE_STATE
 	/* Handle reschedules */
@@ -271,7 +284,7 @@
 	bt $TIF_NEED_RESCHED,%edx
 	jnc sysret_signal
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET 8
 	call schedule
@@ -282,7 +295,7 @@
 	/* Handle a signal */ 
 sysret_signal:
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
 	jz    1f
 
@@ -295,7 +308,7 @@
 1:	movl $_TIF_NEED_RESCHED,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp int_with_check
 	
@@ -327,7 +340,7 @@
  */
 	.globl int_ret_from_sys_call
 int_ret_from_sys_call:
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl $3,CS-ARGOFFSET(%rsp)
 	je retint_restore_args
@@ -349,20 +362,20 @@
 	bt $TIF_NEED_RESCHED,%edx
 	jnc  int_very_careful
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET 8
 	call schedule
 	popq %rdi
 	CFI_ADJUST_CFA_OFFSET -8
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp int_with_check
 
 	/* handle signals and tracing -- both require a full stack frame */
 int_very_careful:
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
 	/* Check for syscall exit trace */	
 	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
@@ -385,7 +398,7 @@
 1:	movl $_TIF_NEED_RESCHED,%edi	
 int_restore_rest:
 	RESTORE_REST
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp int_with_check
 	CFI_ENDPROC
@@ -506,7 +519,7 @@
 	CFI_DEF_CFA_REGISTER	rbp
 	testl $3,CS(%rdi)
 	je 1f
-	swapgs	
+	SWAPGS
 	/* irqcount is used to check if a CPU is already on an interrupt
 	   stack or not. While this is essentially redundant with preempt_count
 	   it is a little cheaper to use a separate counter in the PDA
@@ -527,7 +540,7 @@
 	interrupt do_IRQ
 	/* 0(%rsp): oldrsp-ARGOFFSET */
 ret_from_intr:
-	cli	
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	decl %gs:pda_irqcount
 	leaveq
@@ -556,13 +569,13 @@
 	/*
 	 * The iretq could re-enable interrupts:
 	 */
-	cli
+	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_IRETQ
-	swapgs 
+	SWAPGS
 	jmp restore_args
 
 retint_restore_args:	/* return to kernel space */
-	cli
+	DISABLE_INTERRUPTS(CLBR_ANY)
 	/*
 	 * The iretq could re-enable interrupts:
 	 */
@@ -570,10 +583,14 @@
 restore_args:
 	RESTORE_ARGS 0,8,0						
 iret_label:	
+#ifdef CONFIG_PARAVIRT
+	INTERRUPT_RETURN
+#endif
+ENTRY(native_iret)
 	iretq
 
 	.section __ex_table,"a"
-	.quad iret_label,bad_iret	
+	.quad native_iret, bad_iret
 	.previous
 	.section .fixup,"ax"
 	/* force a signal here? this matches i386 behaviour */
@@ -581,24 +598,24 @@
 bad_iret:
 	movq $11,%rdi	/* SIGSEGV */
 	TRACE_IRQS_ON
-	sti
-	jmp do_exit			
-	.previous	
-	
+	ENABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
+	jmp do_exit
+	.previous
+
 	/* edi: workmask, edx: work */
 retint_careful:
 	CFI_RESTORE_STATE
 	bt    $TIF_NEED_RESCHED,%edx
 	jnc   retint_signal
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET	8
 	call  schedule
 	popq %rdi		
 	CFI_ADJUST_CFA_OFFSET	-8
 	GET_THREAD_INFO(%rcx)
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	jmp retint_check
 	
@@ -606,14 +623,14 @@
 	testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
 	jz    retint_swapgs
 	TRACE_IRQS_ON
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
 	movq $-1,ORIG_RAX(%rsp) 			
 	xorl %esi,%esi		# oldset
 	movq %rsp,%rdi		# &pt_regs
 	call do_notify_resume
 	RESTORE_REST
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	movl $_TIF_NEED_RESCHED,%edi
 	GET_THREAD_INFO(%rcx)
@@ -731,7 +748,7 @@
 	rdmsr
 	testl %edx,%edx
 	js    1f
-	swapgs
+	SWAPGS
 	xorl  %ebx,%ebx
 1:
 	.if \ist
@@ -747,7 +764,7 @@
 	.if \ist
 	addq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
 	.endif
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	.if \irqtrace
 	TRACE_IRQS_OFF
 	.endif
@@ -776,10 +793,10 @@
 	.if \trace
 	TRACE_IRQS_IRETQ 0
 	.endif
-	swapgs
+	SWAPGS_UNSAFE_STACK
 paranoid_restore\trace:
 	RESTORE_ALL 8
-	iretq
+	INTERRUPT_RETURN
 paranoid_userspace\trace:
 	GET_THREAD_INFO(%rcx)
 	movl threadinfo_flags(%rcx),%ebx
@@ -794,11 +811,11 @@
 	.if \trace
 	TRACE_IRQS_ON
 	.endif
-	sti
+	ENABLE_INTERRUPTS(CLBR_NONE)
 	xorl %esi,%esi 			/* arg2: oldset */
 	movq %rsp,%rdi 			/* arg1: &pt_regs */
 	call do_notify_resume
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	.if \trace
 	TRACE_IRQS_OFF
 	.endif
@@ -807,9 +824,9 @@
 	.if \trace
 	TRACE_IRQS_ON
 	.endif
-	sti
+	ENABLE_INTERRUPTS(CLBR_ANY)
 	call schedule
-	cli
+	DISABLE_INTERRUPTS(CLBR_ANY)
 	.if \trace
 	TRACE_IRQS_OFF
 	.endif
@@ -862,7 +879,7 @@
 	testl $3,CS(%rsp)
 	je  error_kernelspace
 error_swapgs:	
-	swapgs
+	SWAPGS
 error_sti:	
 	movq %rdi,RDI(%rsp) 	
 	CFI_REL_OFFSET	rdi,RDI
@@ -874,7 +891,7 @@
 error_exit:
 	movl %ebx,%eax
 	RESTORE_REST
-	cli
+	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	GET_THREAD_INFO(%rcx)	
 	testl %eax,%eax
@@ -911,12 +928,12 @@
 	CFI_STARTPROC
 	pushf
 	CFI_ADJUST_CFA_OFFSET 8
-	cli
-        swapgs
+	DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
+        SWAPGS
 gs_change:     
         movl %edi,%gs   
 2:	mfence		/* workaround */
-	swapgs
+	SWAPGS
         popf
 	CFI_ADJUST_CFA_OFFSET -8
         ret
@@ -930,7 +947,7 @@
         .section .fixup,"ax"
 	/* running with kernelgs */
 bad_gs: 
-	swapgs			/* switch back to user gs */
+	SWAPGS			/* switch back to user gs */
 	xorl %eax,%eax
         movl %eax,%gs
         jmp  2b

[PATCH 11/15] cleanup CLI_STRING, STI_STRING and friends

[Glauber de Oliveira Costa]

Since the advent of ticket locking, CLI_STRING, STI_STRING, and friends
are not used anymore. They can now be safely deleted.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/spinlock.h |    9 ---------
 1 files changed, 0 insertions(+), 9 deletions(-)

Index: linux-2.6-x86/include/asm-x86/spinlock.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/spinlock.h	2007-12-20 19:06:59.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/spinlock.h	2007-12-20 19:08:09.000000000 -0800
@@ -19,15 +19,6 @@
  * (the type definitions are in asm/spinlock_types.h)
  */
 
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define CLI_STRING	"cli"
-#define STI_STRING	"sti"
-#define CLI_STI_CLOBBERS
-#define CLI_STI_INPUT_ARGS
-#endif /* CONFIG_PARAVIRT */
-
 #ifdef CONFIG_X86_32
 typedef char _slock_t;
 # define LOCK_INS_DEC "decb"

[PATCH 12/15] add CLBR_ defines for x86_64.

[Glauber de Oliveira Costa]

x86_64 needs a potentially larger clobber list than i386, due to its calling
convention. So we add more CLBR_ defines for it.
Note that CLBR_ANY is different for each of the architectures, since it comprises
the notion of "All call clobbers in this architecture"

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 include/asm-x86/paravirt.h |   23 ++++++++++++++++++-----
 1 files changed, 18 insertions(+), 5 deletions(-)

Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:08:06.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:08:10.000000000 -0800
@@ -8,11 +8,24 @@
 #include <asm/asm.h>
 
 /* Bitmask of what can be clobbered: usually at least eax. */
-#define CLBR_NONE 0x0
-#define CLBR_EAX 0x1
-#define CLBR_ECX 0x2
-#define CLBR_EDX 0x4
-#define CLBR_ANY 0x7
+#define CLBR_NONE 0
+#define CLBR_EAX  (1 << 0)
+#define CLBR_ECX  (1 << 1)
+#define CLBR_EDX  (1 << 2)
+
+#ifdef CONFIG_X86_64
+#define CLBR_RSI  (1 << 3)
+#define CLBR_RDI  (1 << 4)
+#define CLBR_R8   (1 << 5)
+#define CLBR_R9   (1 << 6)
+#define CLBR_R10  (1 << 7)
+#define CLBR_R11  (1 << 8)
+#define CLBR_ANY  ((1 << 9) - 1)
+#include <asm/desc_defs.h>
+#else
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 3) - 1)
+#endif /* X86_64 */
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>

[PATCH 13/15] move patching code to arch-specific file.

[Glauber de Oliveira Costa]

The core patching code for paravirt is sufficiently different
among i386 and x86_64, and we move them to specific files.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/Makefile_32 |    2 +-
 arch/x86/kernel/paravirt.c  |   50 -------------------------------------------
 include/asm-x86/paravirt.h  |    8 +++++++
 3 files changed, 9 insertions(+), 51 deletions(-)

Index: linux-2.6-x86/arch/x86/kernel/Makefile_32
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/Makefile_32	2007-12-20 19:07:15.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/Makefile_32	2007-12-20 19:08:11.000000000 -0800
@@ -48,7 +48,7 @@
 obj-$(CONFIG_MGEODE_LX)		+= geode_32.o mfgpt_32.o
 
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_32.o
 obj-y				+= pcspeaker.o
 
 obj-$(CONFIG_SCx200)		+= scx200_32.o
Index: linux-2.6-x86/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/paravirt.c	2007-12-20 19:08:06.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/paravirt.c	2007-12-20 19:08:11.000000000 -0800
@@ -58,59 +58,9 @@
 	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
 
-DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
-DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
-DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
-DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
-DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
-DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
-DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
-DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
-DEF_NATIVE(pv_cpu_ops, clts, "clts");
-DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
-
 /* Undefined instruction for dealing with missing ops pointers. */
 static const unsigned char ud2a[] = { 0x0f, 0x0b };
 
-static unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-			     unsigned long addr, unsigned len)
-{
-	const unsigned char *start, *end;
-	unsigned ret;
-
-	switch(type) {
-#define SITE(ops, x)						\
-	case PARAVIRT_PATCH(ops.x):				\
-		start = start_##ops##_##x;			\
-		end = end_##ops##_##x;				\
-		goto patch_site
-
-	SITE(pv_irq_ops, irq_disable);
-	SITE(pv_irq_ops, irq_enable);
-	SITE(pv_irq_ops, restore_fl);
-	SITE(pv_irq_ops, save_fl);
-	SITE(pv_cpu_ops, iret);
-	SITE(pv_cpu_ops, irq_enable_syscall_ret);
-	SITE(pv_mmu_ops, read_cr2);
-	SITE(pv_mmu_ops, read_cr3);
-	SITE(pv_mmu_ops, write_cr3);
-	SITE(pv_cpu_ops, clts);
-	SITE(pv_cpu_ops, read_tsc);
-#undef SITE
-
-	patch_site:
-		ret = paravirt_patch_insns(ibuf, len, start, end);
-		break;
-
-	default:
-		ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
-		break;
-	}
-
-	return ret;
-}
-
 unsigned paravirt_patch_nop(void)
 {
 	return 0;
Index: linux-2.6-x86/include/asm-x86/paravirt.h
===================================================================
--- linux-2.6-x86.orig/include/asm-x86/paravirt.h	2007-12-20 19:08:10.000000000 -0800
+++ linux-2.6-x86/include/asm-x86/paravirt.h	2007-12-20 19:08:11.000000000 -0800
@@ -308,6 +308,11 @@
 #define paravirt_alt(insn_string)					\
 	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
 
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) 					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
 unsigned paravirt_patch_nop(void);
 unsigned paravirt_patch_ignore(unsigned len);
 unsigned paravirt_patch_call(void *insnbuf,
@@ -322,6 +327,9 @@
 unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
 			      const char *start, const char *end);
 
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len);
+
 int paravirt_disable_iospace(void);
 
 /*

[PATCH 14/15] x86_64 patching functions

[Glauber de Oliveira Costa]

Like i386, x86_64 also need to include its own patching function.
(Well, if you're not in a hurry, and don't care about speed, you don't
really _need_ ;-)) 

So here they are. Not much different in essence from i386

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/Makefile_64         |    1 +
 arch/x86/kernel/paravirt_patch_64.c |   56 +++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 0 deletions(-)
 create mode 100644 arch/x86/kernel/paravirt_patch_64.c

Index: linux-2.6-x86/arch/x86/kernel/Makefile_64
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/Makefile_64	2007-12-20 19:05:52.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/Makefile_64	2007-12-20 19:08:14.000000000 -0800
@@ -41,6 +41,7 @@
 obj-$(CONFIG_K8_NB)		+= k8.o
 obj-$(CONFIG_AUDIT)		+= audit_64.o
 obj-$(CONFIG_EFI)		+= efi.o efi_64.o efi_stub_64.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_64.o
 
 obj-$(CONFIG_MODULES)		+= module_64.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
Index: linux-2.6-x86/arch/x86/kernel/paravirt_patch_64.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-x86/arch/x86/kernel/paravirt_patch_64.c	2007-12-20 19:08:14.000000000 -0800
@@ -0,0 +1,56 @@
+#include <asm/paravirt.h>
+#include <asm/asm-offsets.h>
+
+DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
+DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
+DEF_NATIVE(pv_irq_ops, restore_fl, "pushq %rdi; popfq");
+DEF_NATIVE(pv_irq_ops, save_fl, "pushfq; popq %rax");
+DEF_NATIVE(pv_cpu_ops, iret, "iretq");
+DEF_NATIVE(pv_mmu_ops, read_cr2, "movq %cr2, %rax");
+DEF_NATIVE(pv_mmu_ops, read_cr3, "movq %cr3, %rax");
+DEF_NATIVE(pv_mmu_ops, write_cr3, "movq %rdi, %cr3");
+DEF_NATIVE(pv_mmu_ops, flush_tlb_single, "invlpg (%rdi)");
+DEF_NATIVE(pv_cpu_ops, clts, "clts");
+DEF_NATIVE(pv_cpu_ops, wbinvd, "wbinvd");
+
+/* the three commands give us more control to how to return from a syscall */
+DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "movq %gs:" __stringify(pda_oldrsp) ", %rsp; swapgs; sysretq;");
+DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len)
+{
+	const unsigned char *start, *end;
+	unsigned ret;
+
+#define PATCH_SITE(ops, x)					\
+		case PARAVIRT_PATCH(ops.x):			\
+			start = start_##ops##_##x;		\
+			end = end_##ops##_##x;			\
+			goto patch_site
+	switch(type) {
+		PATCH_SITE(pv_irq_ops, restore_fl);
+		PATCH_SITE(pv_irq_ops, save_fl);
+		PATCH_SITE(pv_irq_ops, irq_enable);
+		PATCH_SITE(pv_irq_ops, irq_disable);
+		PATCH_SITE(pv_cpu_ops, iret);
+		PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret);
+		PATCH_SITE(pv_cpu_ops, swapgs);
+		PATCH_SITE(pv_mmu_ops, read_cr2);
+		PATCH_SITE(pv_mmu_ops, read_cr3);
+		PATCH_SITE(pv_mmu_ops, write_cr3);
+		PATCH_SITE(pv_cpu_ops, clts);
+		PATCH_SITE(pv_mmu_ops, flush_tlb_single);
+		PATCH_SITE(pv_cpu_ops, wbinvd);
+
+	patch_site:
+		ret = paravirt_patch_insns(ibuf, len, start, end);
+		break;
+
+	default:
+		ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
+		break;
+	}
+#undef PATCH_SITE
+	return ret;
+}

[PATCH 15/15] replace x86_read/write_per_cpu with a common function.

[Glauber de Oliveira Costa]

x86_read_per_cpu() and its writeish sister are not present in x86_64. So in
this patch, we replace them with __get_cpu_var(), which is present in both

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/paravirt.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

Index: linux-2.6-x86/arch/x86/kernel/paravirt.c
===================================================================
--- linux-2.6-x86.orig/arch/x86/kernel/paravirt.c	2007-12-20 19:08:11.000000000 -0800
+++ linux-2.6-x86/arch/x86/kernel/paravirt.c	2007-12-20 19:08:18.000000000 -0800
@@ -238,18 +238,18 @@
 
 static inline void enter_lazy(enum paravirt_lazy_mode mode)
 {
-	BUG_ON(x86_read_percpu(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
+	BUG_ON(__get_cpu_var(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
 	BUG_ON(preemptible());
 
-	x86_write_percpu(paravirt_lazy_mode, mode);
+	__get_cpu_var(paravirt_lazy_mode) = mode;
 }
 
 void paravirt_leave_lazy(enum paravirt_lazy_mode mode)
 {
-	BUG_ON(x86_read_percpu(paravirt_lazy_mode) != mode);
+	BUG_ON(__get_cpu_var(paravirt_lazy_mode) != mode);
 	BUG_ON(preemptible());
 
-	x86_write_percpu(paravirt_lazy_mode, PARAVIRT_LAZY_NONE);
+	__get_cpu_var(paravirt_lazy_mode) = PARAVIRT_LAZY_NONE;
 }
 
 void paravirt_enter_lazy_mmu(void)
@@ -274,7 +274,7 @@
 
 enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 {
-	return x86_read_percpu(paravirt_lazy_mode);
+	return __get_cpu_var(paravirt_lazy_mode);
 }
 
 struct pv_info pv_info = {

Re: [PATCH 15/15] replace x86_read/write_per_cpu with a common function.

[H. Peter Anvin]

Glauber de Oliveira Costa wrote:
> x86_read_per_cpu() and its writeish sister are not present in x86_64. So in
> this patch, we replace them with __get_cpu_var(), which is present in both

Eventually we'd like to use something closer to the i386 code for 
x86_64, obviously...

	-hpa

Re: [PATCH 13/15] move patching code to arch-specific file.

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 578 bytes --]


* Glauber de Oliveira Costa <gcosta@redhat.com> wrote:

> The core patching code for paravirt is sufficiently different
> among i386 and x86_64, and we move them to specific files.

this patch adds the paravirt_patch_32.o:

> -obj-$(CONFIG_PARAVIRT)		+= paravirt.o
> +obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_32.o

but does not add that file nor any other rule to build that target, so 
it fails to build with the attached config:

make[1]: *** No rule to make target 
 `arch/x86/kernel/paravirt_patch_32.o', needed by 
 `arch/x86/kernel/built-in.o'.  Stop.

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 52465 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc5
# Thu Dec 20 21:13:16 2007
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_KMOD is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_VMI is not set
CONFIG_LGUEST_GUEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_MVIAC7=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=m
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
# CONFIG_SECCOMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_HIBERNATION_UP_POSSIBLE=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
# CONFIG_SCx200HR_TIMER is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PCMCIA_PROBE=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
# CONFIG_IP_VS_WRR is not set
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=y

#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
# CONFIG_NF_CONNTRACK_MARK is not set
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
CONFIG_NF_CONNTRACK_SANE=m
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
CONFIG_IP_NF_ARP_MANGLE=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_IP_DCCP=y
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=y
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
# CONFIG_ATM_CLIP is not set
# CONFIG_ATM_LANE is not set
# CONFIG_ATM_BR2684 is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=m
# CONFIG_BPQETHER is not set
CONFIG_DMASCC=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
CONFIG_SCC_TRXECHO=y
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
CONFIG_ACTISYS_DONGLE=m
# CONFIG_TEKRAM_DONGLE is not set
# CONFIG_TOIM3232_DONGLE is not set
# CONFIG_LITELINK_DONGLE is not set
CONFIG_MA600_DONGLE=m
# CONFIG_GIRBIL_DONGLE is not set
# CONFIG_MCP2120_DONGLE is not set
# CONFIG_OLD_BELKIN_DONGLE is not set
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=m
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
# CONFIG_MAC80211_RCSIMPLE is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_LOWTX_FRAME_DUMP=y
# CONFIG_TKIP_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_IEEE80211=y
CONFIG_IEEE80211_DEBUG=y
# CONFIG_IEEE80211_CRYPT_WEP is not set
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_RFKILL=m
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
# CONFIG_NET_9P_VIRTIO is not set
CONFIG_NET_9P_DEBUG=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
# CONFIG_PNPACPI is not set
# CONFIG_BLK_DEV is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=y
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=m
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_CMD640_PCI=m
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_LEGACY=y
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NS87410=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=y
CONFIG_PATA_PLATFORM=y
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
# CONFIG_IEEE1394_OHCI1394 is not set

#
# Protocols
#
# CONFIG_IEEE1394_SBP2 is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
# CONFIG_I2O_CONFIG is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=y
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_NET_SB1000=y
CONFIG_IP1000=y
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
# CONFIG_ARCNET_COM90xxIO is not set
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=y
CONFIG_EL2=m
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_EL3=y
CONFIG_3C515=m
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
# CONFIG_NI52 is not set
# CONFIG_NI65 is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=y
CONFIG_ULI526X=m
CONFIG_AT1700=y
CONFIG_DEPCA=m
CONFIG_HP100=y
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_AC3200=m
CONFIG_APRICOT=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
CONFIG_CS89x0=y
CONFIG_EEPRO100=m
CONFIG_E100=y
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_SC92031=m
# CONFIG_NETDEV_1000 is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=y
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=y
CONFIG_IXGBE=m
# CONFIG_IXGB is not set
CONFIG_S2IO=y
CONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=y
# CONFIG_NIU is not set
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_TR=y
CONFIG_IBMTR=y
CONFIG_IBMOL=m
CONFIG_IBMLS=y
CONFIG_3C359=y
CONFIG_TMS380TR=m
# CONFIG_TMSPCI is not set
# CONFIG_SKISA is not set
CONFIG_PROTEON=m
# CONFIG_ABYSS is not set
CONFIG_SMCTR=y

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
# CONFIG_LIBERTAS_SDIO is not set
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_RTL8187=y
CONFIG_ADM8211=y
# CONFIG_P54_COMMON is not set
CONFIG_IWLWIFI=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_SENSITIVITY=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWLWIFI_QOS is not set
CONFIG_IWL4965=m
CONFIG_IWL3945=m
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_PIO=y
# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set
# CONFIG_B43LEGACY_DMA_MODE is not set
CONFIG_B43LEGACY_PIO_MODE=y
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2400PCI=m
# CONFIG_RT2400PCI_RFKILL is not set
# CONFIG_RT2500PCI is not set
CONFIG_RT61PCI=m
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT2500USB=m
# CONFIG_RT73USB is not set
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_WAN=y
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SEALEVEL_4021 is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=y
# CONFIG_WANXL is not set
CONFIG_PC300=m

#
# Cyclades-PC300 MLPPP support is disabled.
#

#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_PC300TOO=m
CONFIG_N2=m
# CONFIG_C101 is not set
CONFIG_FARSYNC=y
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_SBNI=y
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
CONFIG_ATM_NICSTAR_USE_IDT77105=y
# CONFIG_ATM_IDT77252 is not set
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=y
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_ESPSERIAL=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=y
# CONFIG_MOXA_SMARTIO_NEW is not set
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=y
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
# CONFIG_SERIAL_8250_PNP is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
# CONFIG_RTC is not set
CONFIG_GEN_RTC=m
# CONFIG_GEN_RTC_X is not set
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_MWAVE=m
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_ATMEL=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_TINY_USB=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
CONFIG_I2C_PCA_ISA=y

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=y
CONFIG_SENSORS_DS1374=m
CONFIG_DS1682=m
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
CONFIG_W1=m
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_POWER_SUPPLY=m
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=y
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMPEX=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_HWMON_DEBUG_CHIP=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
CONFIG_SC520_WDT=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not set
CONFIG_IT8712F_WDT=y
CONFIG_SC1200_WDT=y
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=y
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=y
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=y
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
# CONFIG_WDT_501_PCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=y

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
CONFIG_FB_HECUBA=m
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
# CONFIG_FB_ATY128_BACKLIGHT is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
# CONFIG_FB_CYBLA is not set
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=y
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
# CONFIG_FB_GEODE_GX is not set
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=y
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_MSNDCLAS=m
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_PHIDGET=y
CONFIG_USB_PHIDGETKIT=m
# CONFIG_USB_PHIDGETMOTORCONTROL is not set
CONFIG_USB_PHIDGETSERVO=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set

#
# USB DSL modem support
#
# CONFIG_USB_ATM is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
# CONFIG_INFINIBAND_SRP is not set
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I82860=y
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_I5000=m
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
CONFIG_LGUEST=m

#
# Userspace I/O
#
CONFIG_UIO=y
CONFIG_UIO_CIF=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_NOLOCK=y
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_XPRT_RDMA is not set
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

Re: [PATCH 13/15] move patching code to arch-specific file.

[Ingo Molnar]

* Ingo Molnar <mingo@elte.hu> wrote:

> this patch adds the paravirt_patch_32.o:
> 
> > -obj-$(CONFIG_PARAVIRT)		+= paravirt.o
> > +obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_32.o
> 
> but does not add that file nor any other rule to build that target, so 
> it fails to build with the attached config:
> 
> make[1]: *** No rule to make target 
>  `arch/x86/kernel/paravirt_patch_32.o', needed by 
>  `arch/x86/kernel/built-in.o'.  Stop.

if it's just that single missing file then please send me a patch that 
adds that file and i'll add it to this patch. (instead of resending the 
whole series)

	Ingo

Re: [PATCH 13/15] move patching code to arch-specific file.

[Glauber de Oliveira Costa]

[-- Attachment #1: Type: text/plain, Size: 1024 bytes --]

On Dec 20, 2007 6:33 PM, Ingo Molnar <mingo@elte.hu> wrote:
>
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > this patch adds the paravirt_patch_32.o:
> >
> > > -obj-$(CONFIG_PARAVIRT)             += paravirt.o
> > > +obj-$(CONFIG_PARAVIRT)             += paravirt.o paravirt_patch_32.o
> >
> > but does not add that file nor any other rule to build that target, so
> > it fails to build with the attached config:
> >
> > make[1]: *** No rule to make target
> >  `arch/x86/kernel/paravirt_patch_32.o', needed by
> >  `arch/x86/kernel/built-in.o'.  Stop.
>
> if it's just that single missing file then please send me a patch that
> adds that file and i'll add it to this patch. (instead of resending the
> whole series)

Yeah, I must have forgotten to git-add it.
It was building here fine, because I clearly have the file locally ;-)

I'm attaching a new patch that replaces just this one.

-- 
Glauber de Oliveira Costa.
"Free as in Freedom"
http://glommer.net

"The less confident you are, the more serious you have to act."

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-move-patching-code-to-arch-specific-file.patch --]
[-- Type: text/x-patch; name=0001-move-patching-code-to-arch-specific-file.patch, Size: 6001 bytes --]

From 9a9307e976391776c0d63e3640d90738e20e9ee9 Mon Sep 17 00:00:00 2001
From: Glauber de Oliveira Costa <gcosta@redhat.com>
Date: Tue, 18 Dec 2007 16:47:35 -0200
Subject: [PATCH] [PATCH] move patching code to arch-specific file.

The core patching code for paravirt is sufficiently different
among i386 and x86_64, and we move them to specific files.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
---
 arch/x86/kernel/Makefile_32         |    2 +-
 arch/x86/kernel/paravirt.c          |   50 -----------------------------------
 arch/x86/kernel/paravirt_patch_32.c |   49 ++++++++++++++++++++++++++++++++++
 include/asm-x86/paravirt.h          |    8 +++++
 4 files changed, 58 insertions(+), 51 deletions(-)
 create mode 100644 arch/x86/kernel/paravirt_patch_32.c

diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32
index cfb71a5..86c6327 100644
--- a/arch/x86/kernel/Makefile_32
+++ b/arch/x86/kernel/Makefile_32
@@ -48,7 +48,7 @@ obj-$(CONFIG_K8_NB)		+= k8.o
 obj-$(CONFIG_MGEODE_LX)		+= geode_32.o mfgpt_32.o
 
 obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
-obj-$(CONFIG_PARAVIRT)		+= paravirt.o
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_32.o
 obj-y				+= pcspeaker.o
 
 obj-$(CONFIG_SCx200)		+= scx200_32.o
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index e7c17cc..864be04 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -58,59 +58,9 @@ char *memory_setup(void)
 	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
 
-DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
-DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
-DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
-DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
-DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
-DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
-DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
-DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
-DEF_NATIVE(pv_cpu_ops, clts, "clts");
-DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
-
 /* Undefined instruction for dealing with missing ops pointers. */
 static const unsigned char ud2a[] = { 0x0f, 0x0b };
 
-static unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-			     unsigned long addr, unsigned len)
-{
-	const unsigned char *start, *end;
-	unsigned ret;
-
-	switch(type) {
-#define SITE(ops, x)						\
-	case PARAVIRT_PATCH(ops.x):				\
-		start = start_##ops##_##x;			\
-		end = end_##ops##_##x;				\
-		goto patch_site
-
-	SITE(pv_irq_ops, irq_disable);
-	SITE(pv_irq_ops, irq_enable);
-	SITE(pv_irq_ops, restore_fl);
-	SITE(pv_irq_ops, save_fl);
-	SITE(pv_cpu_ops, iret);
-	SITE(pv_cpu_ops, irq_enable_syscall_ret);
-	SITE(pv_mmu_ops, read_cr2);
-	SITE(pv_mmu_ops, read_cr3);
-	SITE(pv_mmu_ops, write_cr3);
-	SITE(pv_cpu_ops, clts);
-	SITE(pv_cpu_ops, read_tsc);
-#undef SITE
-
-	patch_site:
-		ret = paravirt_patch_insns(ibuf, len, start, end);
-		break;
-
-	default:
-		ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
-		break;
-	}
-
-	return ret;
-}
-
 unsigned paravirt_patch_nop(void)
 {
 	return 0;
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
new file mode 100644
index 0000000..82fc5fc
--- /dev/null
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -0,0 +1,49 @@
+#include <asm/paravirt.h>
+
+DEF_NATIVE(pv_irq_ops, irq_disable, "cli");
+DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
+DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
+DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
+DEF_NATIVE(pv_cpu_ops, iret, "iret");
+DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
+DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
+DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
+DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
+DEF_NATIVE(pv_cpu_ops, clts, "clts");
+DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len)
+{
+	const unsigned char *start, *end;
+	unsigned ret;
+
+#define PATCH_SITE(ops, x)					\
+		case PARAVIRT_PATCH(ops.x):			\
+			start = start_##ops##_##x;		\
+			end = end_##ops##_##x;			\
+			goto patch_site
+	switch(type) {
+		PATCH_SITE(pv_irq_ops, irq_disable);
+		PATCH_SITE(pv_irq_ops, irq_enable);
+		PATCH_SITE(pv_irq_ops, restore_fl);
+		PATCH_SITE(pv_irq_ops, save_fl);
+		PATCH_SITE(pv_cpu_ops, iret);
+		PATCH_SITE(pv_cpu_ops, irq_enable_syscall_ret);
+		PATCH_SITE(pv_mmu_ops, read_cr2);
+		PATCH_SITE(pv_mmu_ops, read_cr3);
+		PATCH_SITE(pv_mmu_ops, write_cr3);
+		PATCH_SITE(pv_cpu_ops, clts);
+		PATCH_SITE(pv_cpu_ops, read_tsc);
+
+	patch_site:
+		ret = paravirt_patch_insns(ibuf, len, start, end);
+		break;
+
+	default:
+		ret = paravirt_patch_default(type, clobbers, ibuf, addr, len);
+		break;
+	}
+#undef PATCH_SITE
+	return ret;
+}
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index 96d9d3f..3b747d0 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -308,6 +308,11 @@ extern struct pv_mmu_ops pv_mmu_ops;
 #define paravirt_alt(insn_string)					\
 	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
 
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) 					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
 unsigned paravirt_patch_nop(void);
 unsigned paravirt_patch_ignore(unsigned len);
 unsigned paravirt_patch_call(void *insnbuf,
@@ -322,6 +327,9 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
 			      const char *start, const char *end);
 
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len);
+
 int paravirt_disable_iospace(void);
 
 /*
-- 
1.5.0.6

Re: [PATCH 13/15] move patching code to arch-specific file.

[Ingo Molnar]

* Glauber de Oliveira Costa <glommer@gmail.com> wrote:

> > > make[1]: *** No rule to make target
> > >  `arch/x86/kernel/paravirt_patch_32.o', needed by
> > >  `arch/x86/kernel/built-in.o'.  Stop.
> >
> > if it's just that single missing file then please send me a patch that
> > adds that file and i'll add it to this patch. (instead of resending the
> > whole series)
> 
> Yeah, I must have forgotten to git-add it. It was building here fine, 
> because I clearly have the file locally ;-)
> 
> I'm attaching a new patch that replaces just this one.

thanks, this did the trick, it builds fine now.

	Ingo