From: Andrew Morton <akpm@linux-foundation.org>
To: Yinghai Lu <Yinghai.Lu@Sun.COM>
Cc: mingo@elte.hu, hpa@zytor.com, tglx@linutronix.de,
jeff@garzik.org, greg@kroah.com, hancockr@shaw.ca, ak@suse.de,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] x86: MMCONF enable MCFG early
Date: Fri, 18 Jan 2008 13:58:30 -0800 [thread overview]
Message-ID: <20080118135830.7a04a806.akpm@linux-foundation.org> (raw)
In-Reply-To: <200801161409.02591.yinghai.lu@sun.com>
On Wed, 16 Jan 2008 14:09:02 -0800
Yinghai Lu <Yinghai.Lu@Sun.COM> wrote:
> [PATCH] x86: MMCONF enable MCFG early
>
> patch
> x86: validate against ACPI motherboard resources
>
> changed the mmconf init sequence, and init MMCONF late in acpi_init.
>
> here change it back to old sequence
> 1. check hostbridge in early
> 2. check MCFG with e820 in early
> 3. if all fail, will check MCFg with acpi _CRS in acpi_init
>
> So we can make MCONF working again when acpi=off is set if hostbridge support that.
>
> ...
>
> + printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
> "segment %hu buses %u - %u\n",
> i, (unsigned long)cfg->address, cfg->pci_segment,
> (unsigned int)cfg->start_bus_number,
> (unsigned int)cfg->end_bus_number);
> +
> + if (!early)
> if (is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
> printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
> "in ACPI motherboard resources\n",
> cfg->address);
> - } else {
> + valid = 1;
> + }
grumble. Please don't mess up the kernel source like that.
> -void __init pci_mmcfg_late_init(void)
> +void __init __pci_mmcfg_init(int type, int early)
> {
> - int known_bridge = 0;
> -
> /* MMCONFIG disabled */
> if ((pci_probe & PCI_PROBE_MMCONF) == 0)
> return;
>
> /* MMCONFIG already enabled */
> + if (!early)
> if (!(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
> return;
>
and that. Do it properly.
--- a/arch/x86/pci/mmconfig-shared.c~x86-mmconf-enable-mcfg-early-cleanup
+++ a/arch/x86/pci/mmconfig-shared.c
@@ -308,8 +308,8 @@ static void __init pci_mmcfg_reject_brok
(unsigned int)cfg->start_bus_number,
(unsigned int)cfg->end_bus_number);
- if (!early)
- if (is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
+ if (!early &&
+ is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
"in ACPI motherboard resources\n",
cfg->address);
@@ -357,8 +357,7 @@ void __init __pci_mmcfg_init(int type, i
return;
/* MMCONFIG already enabled */
- if (!early)
- if (!(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
+ if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
return;
/* for late to exit */
_
prev parent reply other threads:[~2008-01-18 21:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200801161405.17889.yinghai.lu@sun.com>
2008-01-16 22:08 ` [PATCH 1/2] x86: clear pci_mmcfg_virt when mmcfg get rejected Yinghai Lu
[not found] ` <200801161406.38946.yinghai.lu@sun.com>
2008-01-16 22:09 ` [PATCH 2/2] x86: MMCONF enable MCFG early Yinghai Lu
2008-01-17 0:26 ` Yinghai Lu
2008-01-18 10:00 ` Ingo Molnar
2008-01-18 10:01 ` Ingo Molnar
2008-01-18 21:46 ` Yinghai Lu
2008-01-18 21:58 ` Andrew Morton [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080118135830.7a04a806.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=Yinghai.Lu@Sun.COM \
--cc=ak@suse.de \
--cc=greg@kroah.com \
--cc=hancockr@shaw.ca \
--cc=hpa@zytor.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox