From: Adrian Bunk <bunk@kernel.org>
To: zippel@linux-m68k.org, Sam Ravnborg <sam@ravnborg.org>
Cc: linux-kbuild@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] kconfig: remove "enable"
Date: Wed, 23 Jan 2008 01:54:39 +0200 [thread overview]
Message-ID: <20080122235439.GJ26556@does.not.exist> (raw)
Kconfig had a synonym "enable" for "select" that was neither documented
nor used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
---
scripts/kconfig/zconf.gperf | 1 -
scripts/kconfig/zconf.hash.c_shipped | 14 +++++++-------
2 files changed, 7 insertions(+), 8 deletions(-)
6b3161305f33144e2ae5227bbf32221e2310371d
diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf
index 93538e5..2196816 100644
--- a/scripts/kconfig/zconf.gperf
+++ b/scripts/kconfig/zconf.gperf
@@ -35,7 +35,6 @@ int, T_TYPE, TF_COMMAND, S_INT
hex, T_TYPE, TF_COMMAND, S_HEX
string, T_TYPE, TF_COMMAND, S_STRING
select, T_SELECT, TF_COMMAND
-enable, T_SELECT, TF_COMMAND
range, T_RANGE, TF_COMMAND
option, T_OPTION, TF_COMMAND
on, T_ON, TF_PARAM
diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped
index ab28b18..fb66a5d 100644
--- a/scripts/kconfig/zconf.hash.c_shipped
+++ b/scripts/kconfig/zconf.hash.c_shipped
@@ -1,4 +1,4 @@
-/* ANSI-C code produced by gperf version 3.0.2 */
+/* ANSI-C code produced by gperf version 3.0.3 */
/* Command-line: gperf */
/* Computed positions: -k'1,3' */
@@ -53,7 +53,7 @@ kconf_id_hash (register const char *str, register unsigned int len)
49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 18, 11, 5,
+ 49, 49, 49, 49, 49, 49, 49, 49, 11, 5,
0, 0, 5, 49, 5, 20, 49, 49, 5, 20,
5, 0, 30, 49, 0, 15, 0, 10, 49, 49,
25, 49, 49, 49, 49, 49, 49, 49, 49, 49,
@@ -107,7 +107,6 @@ struct kconf_id_strings_t
char kconf_id_strings_str21[sizeof("string")];
char kconf_id_strings_str22[sizeof("if")];
char kconf_id_strings_str23[sizeof("int")];
- char kconf_id_strings_str24[sizeof("enable")];
char kconf_id_strings_str26[sizeof("select")];
char kconf_id_strings_str27[sizeof("modules")];
char kconf_id_strings_str28[sizeof("tristate")];
@@ -141,7 +140,6 @@ static struct kconf_id_strings_t kconf_id_strings_contents =
"string",
"if",
"int",
- "enable",
"select",
"modules",
"tristate",
@@ -157,13 +155,16 @@ static struct kconf_id_strings_t kconf_id_strings_contents =
#define kconf_id_strings ((const char *) &kconf_id_strings_contents)
#ifdef __GNUC__
__inline
+#ifdef __GNUC_STDC_INLINE__
+__attribute__ ((__gnu_inline__))
+#endif
#endif
struct kconf_id *
kconf_id_lookup (register const char *str, register unsigned int len)
{
enum
{
- TOTAL_KEYWORDS = 31,
+ TOTAL_KEYWORDS = 30,
MIN_WORD_LENGTH = 2,
MAX_WORD_LENGTH = 14,
MIN_HASH_VALUE = 2,
@@ -194,8 +195,7 @@ kconf_id_lookup (register const char *str, register unsigned int len)
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str24, T_SELECT, TF_COMMAND},
- {-1},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE},
next reply other threads:[~2008-01-22 23:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-22 23:54 Adrian Bunk [this message]
2008-01-24 20:53 ` [2.6 patch] kconfig: remove "enable" Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080122235439.GJ26556@does.not.exist \
--to=bunk@kernel.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=zippel@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox